Abstract:Tokamak is a kind of device that uses strong magnetic fields to confine the hot nuclear fuel in plasma state and achieve the controlled thermonuclear fusion reaction. It is well-known that increasing the plasma elongation is beneficial for improving the performance of tokamak. However, high elongation is always along with a strong intrinsic vertical insta-bility. The control system to neutralize the vertical instability of the plasma may fail. As a result, the plasma will move vertically and finally strike on the plasma-facing components accompanied by rapid thermal and current disruption. During this process, large eddy cur-rents will be induced in the plasma surrounding conductive structures and high heat flux will be injected into the first wall of the vacuum vessel (VV). The eddy currents and the temperature gradient then produce strong Lorentz forces and thermal stress, which may cause excessive deformation or even failure of the device. Additionally, there are compli-cated magneto-thermal-mechanical coupling (MTMC) phenomena in the dynamics of the tokamak structures, which may have non-negligible influences on the distribution of the electromagnetic and mechanical loads and the dynamic response of the structure. To en-sure the safety of the tokamak device, it is necessary to make quantitative evaluations of the coupling effects on the transient response of the VV and in-vessel structures during plasma disruptions. In this paper, efficient numerical methods were proposed for solving the structural dynamic problem with MTMC effects. The nonlinear interaction between the magneto-mechanical terms was linearized with a block-Gauss-Seidel iterative algorithm, and an adaptive matrix update algorithm was proposed to cope with the temperature ef-fect on material properties. In addition, an MTMC experiment system with both electro-magnetic load and thermal load was set up to demonstrate the validity and efficiency of the proposed numerical methods. Finally, the dynamic response of the vacuum vessel of HL-2M tokamak during a typical plasma disruption was simulated using our updated nu-merical code, and influences of the MTMC effects were quantitatively evaluated.(c) 2023 Elsevier Inc. All rights reserved.

Reduced Order Modeling for Real-Time Monitoring of Structural Displacements due to Electromagnetic Forces in Large Scale Tokamaks

Reduced Order Modeling for real-time monitoring of structural displacements due to electromagnetic forces in large scale Tokamaks

A REDUCED ORDER MODELING OF NONLINEAR ELECTROSTATIC-MECHANICAL SYSTEMS BASED ON THE ENERGY IDENTIFICATION APPROACH

Reduced-order models for electro-magnetic-structural coupling phenomena

Accelerating Kinetic Simulations of Electrostatic Plasmas with Reduced-Order Modeling

Accelerating Construction of Non-Intrusive Nonlinear Structural Dynamics Reduced Order Models through Hyperreduction

Scientific Machine Learning Based Reduced-Order Models for Plasma Turbulence Simulations

The Role of Advanced Modeling in the Assembly and Operation of Tokamak Magnets

A Method For Electromagneto-Thermo-Mechanical Direct Coupling Analysis And Its Application To Tokamak Structures

A Reduced Order Model conditioned on monitoring features for estimation and uncertainty quantification in engineered systems

A Novel Partitioned Approach for Reduced Order Model -- Finite Element Model (ROM-FEM) and ROM-ROM Coupling

Reduced-order models for array structures mounted on platforms with parameters variations

A reduced-order model to estimate first wall particle and heat fluxes for systems codes

Numerical Method and Experimental Validation of the Magneto-Thermal-mechanical Coupling Problem with Application to Tokamak Structures

Reduced Order Modeling for Real-Time Stent Deformation Simulations of Transcatheter Aortic Valve Prostheses

Reduced Order Modeling for Thermal Simulations of Electric Components With Surface-to-Surface Radiation

A Moving Coordinate Numerical Method for Analyses of Electromagneto-Mechanical Coupled Behavior of Structures in A Strong Magnetic Field Aiming at Application to Tokamak Structures

A mimetic finite difference based quasi-static magnetohydrodynamic solver for force-free plasmas in tokamak disruptions

Model Order Reduction for Real-Time FPGA-Based Finite Element Transient Simulation of Three-Phase Transformer

Safety Analysis of Metallic Tokamak-I Against Electromagnetic and Structural Loads

A Simplified Analytical Model for the Analysis of Magnetomechanical Dynamic Response of a Test Module in J-TEXT Tokamak