Abstract:$^{133}$Cs, which is the only stable cesium (Cs) isotope, is one of the most investigated elements in atomic spectroscopy and was used to realize the atomic clock in 1955. Among all atomic clocks, the cesium atomic clock has a special place, since the current unit of time is based on a microwave transition in the Cs atom. In addition, the long lifetime of the $6{\text{P}}_{3/2}$ state and simple preparation technique of Cs vapor cells have great relevance to quantum and atom optics experiments, which suggests the use of the $6{\text{S}} - 6{\text{P}}$ D2 transition as an optical frequency standard. In this work, using one laser as the local oscillator and Cs atoms as the quantum reference, we realized two atomic clocks in the optical and microwave frequencies, respectively. Both clocks could be freely switched or simultaneously output. The optical clock based on the vapor cell continuously operated with a frequency stability of $3.89 \times {10^{ - 13}}$ at 1 s, decreasing to $2.17 \times {10^{ - 13}}$ at 32 s, which was frequency stabilized by modulation transfer spectroscopy and estimated by an optical comb. Then, applying this stabilized laser for an optically pumped Cs beam atomic clock to reduce the laser frequency noise, we obtained a microwave clock with a frequency stability of $1.84 \times {10^{ - 12}}/\sqrt \tau $, reaching $5.99 \times {10^{ - 15}}$ at $10^5$ s. This study demonstrates an attractive feature for the commercialization and deployment of optical and microwave clocks and will guide further development of integrated atomic clocks with better stability. Thus, this study lays the groundwork for future quantum metrology and laser physics.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a dual - frequency optical - microwave atomic clock based on cesium atoms in order to achieve more accurate time measurement and frequency standards. Specifically, the researchers used cesium atoms as a quantum reference and, by optimizing experimental parameters and technical means, realized two atomic clocks operating in the optical and microwave frequency bands respectively. These two clocks can be freely switched or output signals simultaneously, thus expanding the application range of microwave atomic clocks in practical applications and miniaturizing high - performance optical atomic clocks. ### Main Problems and Goals 1. **Improve the Accuracy of Time Measurement**: By developing highly stable optical and microwave atomic clocks, improve the accuracy of time measurement, which is of great significance for global communication, satellite navigation, and scientific research fields. 2. **Miniaturization and Portability**: Miniaturize high - performance optical atomic clocks to make them more portable and suitable for applications in various environments. 3. **Multi - frequency Band Signal Output**: Design a system that can simultaneously or arbitrarily switch and output optical and microwave signals to meet the needs of different application scenarios. ### Technical Means - **Optical Clock**: Use an external - cavity diode laser (ECDL) as a local oscillator and lock the laser frequency to the specific energy - level transition of cesium atoms through the modulation - transfer - spectroscopy (MTS) technique. This makes the frequency stability of the optical clock reach $3.89\times 10^{- 13}$ (1 second) and $2.17\times 10^{-13}$ (32 seconds). - **Microwave Clock**: Use the above - mentioned stable optical frequency standard as a pumping and probing laser source to reduce laser - frequency noise and optimize the performance of the cesium - beam atomic clock. The frequency stability of the microwave clock reaches $1.84\times 10^{-12}/\sqrt{\tau}$, reaching $5.99\times 10^{-15}$ at 105 seconds. ### Application Prospects - **Global Satellite Navigation**: High - precision time measurement is crucial for global satellite navigation systems and can improve positioning accuracy and reliability. - **Basic Physics Research**: Used for verifying general relativity, dark - matter detection, physical - constant - change detection, and other basic physics research. - **Quantum Metrology**: Promote the development of quantum metrology and provide more accurate time and frequency standards for future quantum technologies. Through these technologies and applications, this research lays the foundation for the future development of quantum metrology and laser physics.

Dual-frequency optical-microwave atomic clocks based on cesium atoms

Dual-frequency optical-microwave atomic clocks based on cesium atoms

A Compact Optical Clock Scheme Based on Caesium Atomic Beam

Laser with 10-13 Short-Term Instability for Compact Optically Pumped Cesium Beam Atomic Clock.

Compact Optically Pumped Cesium Beam Atomic Clock with a 5-Day Frequency Stability of 7×10−15

A Caesium Atomic Beam Microwave Clock Detected by Distributed Feedback Laser Diodes

An Optically Pumped Atomic Clock Based on a Continuous Slow Cesium Beam

Improvement of the Short- and Long-Term Stability of High Performance Portable Optically Pumped Cesium Beam Atomic Clock

Faraday laser pumped cesium beam clock

Lasing and Suppressed Cavity-Pulling Effect of Cesium Active Optical Clock

Precision Determination of the Ground-State Hyperfine Splitting in a 113cd+ Microwave Clock

Improving the Short-Term Frequency Stability of a Magnetic-State-selected Cesium Beam Clock with Optical Detection

Compact Vapor Cell Cesium Clock Based on Continuous Wave Optical Pumping

Progress Towards A Microwave Atomic Clock Based on the Laser-Cooled Cadmium Ions

Compact Optical System for Cesium Atomic Fountain Clock

Active Optical Clock Based on Laser Cooling of Alkali-metal Atoms

Recent Progress in Optically-Pumped Cesium Beam Clock at Peking University

Performance Optimizations of Optically Pumped Cesium Beam Frequency Standard

Optical Pumped Cesium Atomic Clock with Multi-pole Magnet

Operation of an optical atomic clock with a Brillouin laser subsystem

High-Accuracy Microwave Atomic Clock via Magic Optical Lattice