Abstract:We realize a high-performance compact optically pumped cesium beam clock using Faraday laser simultaneously as pumping and detection lasers. The Faraday laser, which is frequency stabilized by modulation transfer spectroscopy (MTS) technique, has narrow linewidth and superior frequency stability. Measured by optical heterodyne method between two identical systems, the linewidth of the Faraday laser is 2.5 kHz after MTS locking, and the fractional frequency stability of the Faraday laser is optimized to $1.8\times{10}^{-12}/\sqrt{\tau}$. Based on this high-performance Faraday laser, the cesium beam clock realizes a signal-to-noise ratio (SNR) in 1 Hz bandwidth of $39600$ when the cesium oven temperature is 130°C. Frequency-compared with Hydrogen maser, the fractional frequency stability of the Faraday laser pumped cesium beam clock can reach $1.3\times{10}^{-12}/\sqrt{\tau}$ and drops to $1.4\times{10}^{-14}$ at 10000 s when the cesium oven temperature is 110°C. %, which is the best reported result compared with other cesium beam clocks. This Faraday laser pumped cesium beam clock demonstrates its excellent performance, and its great potential in the fields of timekeeping, navigation, and communication. Meanwhile, the Faraday laser, as a high-performance optical frequency standard, can also contribute to the development of other applications in quantum metrology, precision measurement and atomic physics.

What problem does this paper attempt to address?

The paper aims to address the following issues: 1. **Improving the frequency stability of cesium beam clocks**: By using a Faraday laser as the pump and detection light source, a high-precision, low-noise cesium beam atomic clock is achieved. Traditional lasers (such as external cavity semiconductor lasers) are prone to frequency drift with changes in temperature and current, whereas Faraday lasers have characteristics that resist temperature and current drifts, thereby improving the frequency stability of cesium beam clocks. 2. **Optimizing the signal-to-noise ratio (SNR) of Ramsey fringes**: By employing Faraday lasers with narrow linewidth and low-frequency noise, the SNR of Ramsey fringes is significantly improved, thereby optimizing the overall performance of the cesium beam clock. Experimental results show that at a cesium oven temperature of 110°C, the frequency stability of the cesium beam clock reaches 1.3×10^-12/√τ and drops to 1.4×10^-14 at 10000 seconds. 3. **Achieving a compact optical pumping cesium beam atomic clock**: Utilizing an integrated Faraday laser system, a compact and high-performance cesium beam atomic clock is realized. This design not only facilitates portability and deployment but also shows great potential in fields such as timekeeping, navigation, and communication. In summary, this paper addresses the issues of frequency stability and SNR deficiencies in traditional cesium beam clocks by developing and applying high-performance Faraday laser technology, providing new solutions for fields such as precision measurement and quantum metrology.

Faraday laser pumped cesium beam clock

Compact Extended Cavity Diode Laser System for Small Optically Pumped Cesium Beam Frequency Standards

Laser with 10-13 Short-Term Instability for Compact Optically Pumped Cesium Beam Atomic Clock.

An Optically Pumped Atomic Clock Based on a Continuous Slow Cesium Beam

A Caesium Atomic Beam Microwave Clock Detected by Distributed Feedback Laser Diodes

Faraday Laser with Cavity Mode Locked for Optical Pumped Rubidium Atomic Clock

Optically Pumped Cesium Beam Clock Using Monochromatic Light

Research on Cs Active Faraday Optical Frequency Standard with 459 Nm Laser Pumping

Frequency-stabilized Faraday laser with 10 −14 short-term instability for atomic clocks

Compact Vapor Cell Cesium Clock Based on Continuous Wave Optical Pumping

Design of Optically Pumped Cesium Beam Tube with Hexapole Magnetic System for Longer Lifetime and Better SNR

Lasing of Cesium Active Optical Clock with 459 Nm Laser Pumping

A Compact Optical Clock Scheme Based on Caesium Atomic Beam

A High Performance and Portable Optically Pumped Cesium Beam Frequency Standard

A New Design of A Diffused Laser Light Optically Pumped Small Cesium Beam Frequency Standard

Improving the Short-Term Frequency Stability of a Magnetic-State-selected Cesium Beam Clock with Optical Detection

Gealas Laser Diode Pumped Cesium Beam Frequency Standard

Lasing and Suppressed Cavity-Pulling Effect of Cesium Active Optical Clock

Compact Optically Pumped Cesium Beam Atomic Clock with a 5-Day Frequency Stability of 7×10−15

Frequency Stabilization of a Cesium Faraday Laser with a Double-Layer Vapor Cell As Frequency Reference

Compact Optical System for Cesium Atomic Fountain Clock