Abstract:Background: Ethanol production through fermentation of gas mixtures containing CO, CO2 and H2 has just started operating at commercial scale. However, quantitative schemes for understanding and predicting productivities, yields, mass transfer rates, gas flow profiles and detailed energy requirements have been lacking in literature; such are invaluable tools for process improvements and better systems design. The present study describes the construction of a hybrid model for simulating ethanol production inside a 700 m3 bubble column bioreactor fed with gas of two possible compositions, i.e., pure CO and a 3:1 mixture of H2 and CO2. Results: Estimations made using the thermodynamics-based black-box model of microbial reactions on substrate threshold concentrations, biomass yields, as well as CO and H2 maximum specific uptake rates agreed reasonably well with data and observations reported in literature. According to the bioreactor simulation, there is a strong dependency of process performance on mass transfer rates. When mass transfer coefficients were estimated using a model developed from oxygen transfer to water, ethanol productivity reached 5.1 g L-1 h-1; when the H2/CO2 mixture is fed to the bioreactor, productivity of CO fermentation was 19% lower. Gas utilization reached 23 and 17% for H2/CO2 and CO fermentations, respectively. If mass transfer coefficients were 100% higher than those estimated, ethanol productivity and gas utilization may reach 9.4 g L-1 h-1 and 38% when feeding the H2/CO2 mixture at the same process conditions. The largest energetic requirements for a complete manufacturing plant were identified for gas compression and ethanol distillation, being higher for CO fermentation due to the production of CO2. Conclusions: The thermodynamics-based black-box model of microbial reactions may be used to quantitatively assess and consolidate the diversity of reported data on CO, CO2 and H2 threshold concentrations, biomass yields, maximum substrate uptake rates, and half-saturation constants for CO and H2 for syngas fermentations by acetogenic bacteria. The maximization of ethanol productivity in the bioreactor may come with a cost: low gas utilization. Exploiting the model flexibility, multi-objective optimizations of bioreactor performance might reveal how process conditions and configurations could be adjusted to guide further process development.

Bayesian calibration of bubble size dynamics applied to CO2 gas fermenters

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

A Dual-Scale Turbulence Model for Gas–liquid Bubbly Flows

A Modified Bubble Breakage and Coalescence Model Accounting the Effect of Bubble-Induced Turbulence for CFD-PBM Modelling of Bubble Column Bubbly Flows

Dynamic Modelling of Fluidisation in Gas-Solid Bubbling Fluidised Beds

Dynamic Matrix Control of a Bubble-Column Reactor for Microbial Synthesis Gas Fermentation

Modelling of breakage rate and bubble size distribution in bubble columns accounting for bubble shape variations

CFD Simulation of Gas-Liquid Flow in Bubble Column with Two-bubble Phase Population Balance Model

Applicability of a modified breakage and coalescence model based on the complete turbulence spectrum concept for CFD simulation of gas-liquid mass transfer in a stirred tank reactor

Simulation of Bubble Column Reactors Using CFD Coupled with a Population Balance Model

Bridging scales in multiscale bubble growth dynamics with correlated fluctuations using neural operator learning

A modelling approach to explore the optimum bubble size for micro-nanobubble aeration

Modeling ethanol production through gas fermentation: a biothermodynamics and mass transfer-based hybrid model for microbial growth in a large-scale bubble column bioreactor

Data-based dynamic compartment model: Modeling of E. coli fed-batch fermentation in a 600 m3 bubble column

Bubble Size Modeling Approach for the Simulation of Bubble Columns

Multi-fidelity Bayesian Optimisation of Syngas Fermentation Simulators

CFD simulation for comparative of hydrodynamic effects in biochemical reactors using population balance model with varied inlet gas distribution profiles

Modeling Investigation of Mass Transfer of Gas–liquid Concurrent Flow Processes

Population Balance Model for Gas−Liquid Flows: Influence of Bubble Coalescence and Breakup Models

Gas-Liquid Phase Recirculation in Bubble Column Reactors: Development of a Hybrid Model Based on Local CFD – Adaptive Neuro-Fuzzy Inference System (ANFIS)