Abstract:A transmission-type attenuator with varactor-based tunable attenuation is presented. The design adopts a standard 50- $\Omega$ host microstrip line equipped with varactor-loaded stubs on its side, which also include a resistor and a capacitor in series with a short-circuit termination. The topology allows continuously tunable attenuation without interruption of the host transmission line and thus permits a compact, low-reflection, and low-loss structure for seamless planar microwave circuit integration. A generic and accurate equivalent circuit model for the proposed attenuator topology is developed for fast evolutionary optimization. To verify the circuit model, one design with three identical stubs and one with three different stubs are optimized for different performance priorities. Furthermore, two attenuators with six and nine stubs are also developed to investigate the achievable performance for different stub numbers. Prototypes of the two three-stub and the nine-stub attenuators are fabricated and tested, demonstrating a successful validation. A low reflection of less than $-11.4$ dB is achieved for all attenuators, with a measured insertion loss in the non-attenuating state of less than 1.0 dB for the three-stub attenuators and 2.1 dB for the nine-stub version, and a tunable attenuation up to 13.5 and 32.7 dB, respectively. The phase variations across the range of attenuation levels for the three-stub attenuators are less than 25.0 $^\circ$ and reach 82.3 $^\circ$ for the nine-stub design at 5 GHz. These results demonstrate a large range of tunable attenuation with a small insertion loss in the non-attenuating state, which is achieved with a compact structure suitable for seamless microwave circuit integration.

A Plasma-Based Approach for High-Power Tunable Microwave Varactors

Planar Tunable High-Temperature Superconductor Microwave Broadband Phase Shifter with Patterned Ferroelectric Thin Film

Plasma Switch-Based Technology for High-Speed and High-Power Impedance Tuning

A New High-Power Density Tailored Waveform Modulator for Plasma Processing

Plasma density and ion energy control via driving frequency and applied voltage in a low pressure capacitively coupled plasma discharge

Next-Generation Variable Capacitors to Reduce Capacitance Variable Time Using SiC MOSFETs and p-i-n Diodes in 13.56-MHz RF Plasma Systems

Multiphysics Enabled Numerical Modeling of a Plasma Based Electrically Small VHF-UHF Antenna

A model of radiofrequency and plasma coupling for compact ion sources and design

A 13.56-MHz ZVS Inverter for Radio-Frequency Capacitively Coupled Plasma Power Supply

Near-ideal Energy Modulator for Tunable THz Pulse Generation Using Sectioned Hollow Channel Plasma System

THz Thin Film Varactor Based on Integrated Ferroelectric HfZrO2

Numerical characterization of capacitively coupled plasma driven by tailored frequency modulated radio frequency source

A High-Power Microwave Limiter Using A Self-Actuated Plasma-Based EIT Topology

An Electrically Small Frequency Reconfigurable Antenna with a Wide Tuning Range

Transmission-Type Varactor-Based Tunable Attenuator

Control of electron dynamics, radical and metastable species generation in atmospheric pressure RF plasma jets by Voltage Waveform Tailoring

Customized modulation on plasma uniformity by non-uniform magnetic field in capacitively coupled plasma

Study of Synchronous RF Pulsing in Dual Frequency Capacitively Coupled Plasma

Conceptual design of a high reactive-power ferroelectric fast reactive tuner

RF MEMS Component for Tunable BAN Front-End

Micromachined Tunable Rf Capacitor with Comb Structure