Exploring the Premelting Transition through Molecular Simulations Powered by Neural Network Potentials

Limin Zeng,Ang Gao

2024-04-18

Abstract:The system has addressed the error of "Bad character(s) in field Abstract" for no reason. Please refer to manuscript for the full abstract.

Computational Physics,Soft Condensed Matter

What problem does this paper attempt to address?

Exploring the Premelting Transition through Molecular Simulations Powered by Neural Network Potentials

Limin Zeng,Ang Gao

DOI: https://doi.org/10.3390/cryst14080737

IF: 2.7

2024-08-20

Crystals

Abstract:The premelting layer on crystal surfaces significantly affects the stability, surface reactivity, and phase transition behaviors of crystals. Traditional methods for studying this layer—experimental techniques, classical simulations, and even first-principle simulations—have significant limitations in accuracy and scalability. To overcome these challenges, we employ molecular dynamic simulations based on neural network potentials to investigate the structural and dynamic behavior of the premelting layer on ice. This approach matches the accuracy of first-principle calculations while greatly improving computational efficiency, allowing us to simulate the ice–vapor interface on a much larger scale. In this study, we conducted a one-nanosecond simulation of the ice–vapor interface involving 1024 water molecules. This significantly exceeds the time and size scales of previous first-principle studies. Our simulation results indicate complete surface melting. Furthermore, our simulation results reveal dynamic heterogeneity within the premelting layer, with molecules segregated into clusters of low and high mobility.

materials science, multidisciplinary,crystallography
Towards Full Ab Initio Simulations of Mechanical Response of Ti-N Binary System under Extremely Operational Conditions Via Neural Network Potential

Fangyu Guo,Bo Chen,Qiyu Zeng,Xiaoxiang Yu,Kaiguo Chen,Dongdong Kang,Yong Du,Jianhua Wu,Jiayu Dai

DOI: https://doi.org/10.2139/ssrn.4309287

2022-01-01

SSRN Electronic Journal

Abstract:In the process of high temperature service, the mechanical properties of cutting tools decrease sharply due to the peeling of the protective coating. However, the mechanism of such coating failure remains obscure due to complicated interaction between atomic structure and extreme temperature and stress. This non-equilibrium nature demands both large system size and accurate description from atomic scale, raising challenges for all existing methods. Here, we developed a neural network potential (NNP) of Ti-N binary systems based on density functional theory (DFT) datasets to achieve quantum-accurate large-scale atomic simulation. Compared with empirical interatomic potential based on embedded-atom-method (EAM), the developed NNP predict accurate lattice constant, phonon properties and mechanical properties for a wide range of thermodynamic conditions. Moreover, for the first time, we present the atomic evolution of the fracture behavior of large-scale TiN systems coupled with temperature and stress conditions. Our study validates that an extension of TiN beyond its tensile yield point leads to interatomic brittle fracture. Such simulation of coating fracture and cutting behavior based on large-scale atoms can shed a new light on understanding the microstructure and mechanical properties of coating tools under extreme operating conditions.
Molecular Dynamics Simulation Study of the Melting of Silver Nanoparticles

Jianlei Cui,Lijun Yang,Yang Wang

DOI: https://doi.org/10.1080/10584587.2013.787873

2013-01-01

Integrated Ferroelectrics

Abstract:In the application process of nanoparticles, the melting process plays an important role. Holding the melting characteristics of nanoparticles can essentially improve the correlative technical level. To study the melting characteristics of silver nanoparticles, melting processes of silver nanoparticles are investigated using molecular dynamics simulation. Simulation results show that the microscopic melting process of nanoparticles is the uneven transition process of atomic structures from order to disorder. Also, the melting point of 3 nm particle with 856 atoms is about 815 K and the heat capacity of nanoparticles is negative near the melting temperature. The dominant mechanisms of melting process are analyzed from potential energy temperature relationship, radial distribution function, mean square displacement and atomic evolution configuration. We also found that nanoparticles bunch up due to high surface energy for multi-nanoparticles when the temperature is lower than the melting point. And, when nanoparticles melt into droplet, the liquid nanoparticles have stronger liquidity and automatically reduce to spherical structures due to the role of surface tension.

engineering, electrical & electronic,physics, condensed matter, applied
On the exploration of the melting behavior of metallic compounds and solid solutions via multiple classical molecular dynamics approaches: application to Al-based systems

Camille Rincent,Juan-Ricardo Castillo-Sánchez,Aïmen E Gheribi,Jean-Philippe Harvey

DOI: https://doi.org/10.1039/d3cp00912b

2023-04-12

Abstract:Classical molecular dynamics simulations of metallic systems have been extensively applied in recent years for the exploration of the energetic behavior of mesoscale structures and for the generation of thermodynamic and physical properties. The evaluation of the conditions leading to the melting of pure metals and alloys is particularly challenging as it involves at one point the simultaneous presence of both a solid and a liquid phase. Defects such as vacancies, dislocation, grain boundaries and pores typically promote the melting of a solid by locally increasing its free energy which favors the destruction of long-range ordering at the origin of this phase transition. In real materials, many of these defects are microscopic and cannot yet be modelled via conventional atomistic simulations. Still, molecular dynamics-based methodologies are commonly used to estimate the melting temperature of solids. These methods involve the use of mesoscale supercells with various nanoscale defects. Moreover, the deterministic nature of classical MD simulations requires the adequate selection of the initial configuration to be melted. In this context, the main objective of this paper is to quantify the precision of the existing classical molecular dynamics computational methods used to evaluate the melting point of pure compounds as well as the solidus/liquidus lines of Al-based binary metallic systems. We also aim to improve the methodology of different approaches such as the void method, the interface method as well as the grain method to obtain a precise evaluation of the melting behavior of pure metals and alloys. We carefully analyzed the importance of the local chemical ordering on the melting behavior. The ins and outs of different numerical methods in predicting the melting temperature via MD are discussed through several examples related to pure metallic elements, congruently and non-congruently melting compounds as well as binary solid solutions. It is shown that the defect distribution of the initial supercell configuration plays an important role upon the description of the melting mechanism of solids leading to a poor predictive capability of melting temperature if not properly controlled. A new methodology based on defect distribution within the initial configuration is proposed to overcome these limitations.
Large Scale and Quantum Accurate Molecular Dynamics Simulation:Liquid Iron under Extreme Condition

Qi-Yu Zeng,Bo Chen,Dong-Dong Kang,Jia-Yu Dai

DOI: https://doi.org/10.7498/aps.72.20231258

IF: 0.906

2023-01-01

Acta Physica Sinica

Abstract:Liquid iron is the major component of planetary cores. Its structure and dynamics under high pressure and temperature is of great significance in studying geophysics and planetary science. However, for experimental techniques, it is still difficult to generate and probe such a state of matter under extreme conditions, while for theoretical method like molecular dynamics simulation, the reliable estimation of dynamic properties requires both large simulation size and ab initio accuracy, resulting in unaffordable computational costs for traditional method. Owing to the technical limitation, the understanding of such matters remains limited. In this work, combining molecular dynamics simulation, we establish a neural network potential energy surface model to study the static and dynamic properties of liquid iron at its extreme thermodynamic state close to core-mantle boundary. The implementation of deep neural network extends the simulation scales from one hundred atoms to millions of atoms within quantum accuracy. The estimated static and dynamic structure factor show good consistency with all available X-ray diffraction and inelastic X-ray scattering experimental observations, while the empirical potential based on embedding-atom-method fails to give a unified description of liquid iron across a wide range of thermodynamic conditions. We also demonstrate that the transport property like diffusion coefficient exhibits a strong size effect, which requires more than at least ten thousands of atoms to give a converged value. Our results show that the combination of deep learning technology and molecular modelling provides a way to describe matter realistically under extreme conditions.
Thermal structural disorder and melting transition in high-angle grain-boundary: a molecular-dynamics study

Shijin Zhao,Yongchun Wang,Jianqiang You,Qibin Yang,Leguo Zhou,Hengqiang Ye

1998-01-01

Acta Metallurgica Sinica (English Letters)

Abstract:A structural transition in the high-angle tilt grain-boundary (GB) was investigated by molecular-dynamics simulation. The calculations have been performed at various temperatures and the thermodynamic melting point Tm of the model system was determined by using a many-body potential fitted to copper. A thermal disorder transition in the GB region occurs well below the melting point. The results indicate that such a transition is a continuous process and there is no evidence of pre-melting, which is entirely in accord with experimental results and theoretical prediction. Moreover, it is also observed that melting initiates at the interface and then propagates into the bulk quickly at or above Tm.
A comprehensive investigation on the accuracy and efficiency of methods for melting temperature calculation using molecular dynamics simulations

Xinwei Wang,Mengxin Yang,Xiaoqian Gai,Yibo Sun,Bohan Cao,Jiajin Chen,Min Liang,Fubo Tian,Liang Li

DOI: https://doi.org/10.1016/j.molliq.2023.123924

IF: 6

2024-01-05

Journal of Molecular Liquids

Abstract:Machine learning approaches have been extensively applied to improve the accuracy and reliability of potentials, addressing inherent limitations in molecular dynamics (MD) simulations. Notably, the precise determination of the melting temperature ( T m ) relies on MD simulations, necessitating a comprehensive review of available melting models. This study aims to present a thorough comparison of various melting methods, including the single–phase method, hysteresis method, Z method, modified Z method, void method, modified void method, two–phase method, and sandwich method, considering both accuracy and efficiency. These melting models are systematically categorized into three groups: perfect crystals, crystal defects, and solid–liquid interfaces. The impact of factors such as atomic numbers, heating and cooling rates, crystal defects, and nucleation processes on T m is discussed. Additionally, the temperatures corresponding to the superheating limit and the amorphous transition induced by heating and cooling rates during melting and crystallization processes are analyzed. Furthermore, the study explores the impact of different proportions of solid and the number of solid–liquid interfaces on melting behaviors. To further enhance the accuracy of T m calculations, we propose a new approach termed the modified two–phase method, integrating the void method and two–phase method to account for crystal defects and solid–liquid coexistence, respectively.

chemistry, physical,physics, atomic, molecular & chemical
Efficient and accurate simulation of vitrification in multi-component metallic liquids with neural-network potentials

Rui Su,Jieyi Yu,Pengfei Guan,Weihua Wang

DOI: https://doi.org/10.48550/arXiv.2211.03350

2022-11-07

Materials Science

Abstract:Constructing accurate interatomic potential and overcoming the exponential growth of structural equilibration time are challenges to the atomistic investigations of the composition-dependent structure and dynamics during the vitrification process of deeply supercooled multi-component metallic liquids. In this work, we describe a state-of-the-art strategy to address these challenges simultaneously. In the case of the representative Zr-Cu-Al system, in combination with a general algorithm for generating the neural-network potentials (NNP) of multi-component metallic glasses effectively and accurately, we propose a highly efficient atom-swapping hybrid Monte Carlo (SHMC) algorithm for accelerating the thermodynamic equilibration of deeply supercooled liquids. Extensive calculations demonstrate that the newly developed NNP faithfully reproduces the phase stabilities and structural characteristics obtained from the ab initio calculations and experiments. In the combined NNP-SHMC algorithm, the structure equilibration time in the deeply supercooled temperatures is accelerated by at least five orders of magnitudes, and the quenched glassy samples exhibit comparable stability to those prepared in the laboratory. Our results pave the way for the next-generation studies of the vitrification process and, thereby the composition-dependent glass-forming ability and physical properties of multi-component metallic glasses.
A Generic and Automated Methodology to Simulate Melting Point

Fu-Zhi Dai,Si-Hao Yuan,Yan-Bo Hao,Xin-Fu Gu,Shipeng Zhu,Jidong Hu,Yifen Xu

2024-08-30

Abstract:The melting point of a material constitutes a pivotal property with profound implications across various disciplines of science, engineering, and technology. Recent advancements in machine learning potentials have revolutionized the field, enabling ab initio predictions of materials' melting points through atomic-scale simulations. However, a universal simulation methodology that can be universally applied to any material remains elusive. In this paper, we present a generic, fully automated workflow designed to predict the melting points of materials utilizing molecular dynamics simulations. This workflow incorporates two tailored simulation modalities, each addressing scenarios with and without elemental partitioning between solid and liquid phases. When the compositions of both phases remain unchanged upon melting or solidification, signifying the absence of partitioning, the melting point is identified as the temperature at which these phases coexist in equilibrium. Conversely, in cases where elemental partitioning occurs, our workflow estimates both the nominal melting point, marking the initial transition from solid to liquid, and the nominal solidification point, indicating the reverse process. To ensure precision in determining these critical temperatures, we employ an innovative temperature-volume data fitting technique, suitable for a diverse range of materials exhibiting notable volume disparities between their solid and liquid states. This comprehensive approach offers a robust and versatile solution for predicting melting points, fostering advancements in materials science and technology.

Materials Science,Computational Physics
A Critical Comparison of Neural Network Potentials for Molecular Reaction Dynamics with Exact Permutation Symmetry

Jun Li,Kaisheng Song,Joerg Behler

DOI: https://doi.org/10.1039/c8cp06919k

2019-01-01

Abstract:Correction for ‘A critical comparison of neural network potentials for molecular reaction dynamics with exact permutation symmetry’ by Jun Li et al., Phys. Chem. Chem. Phys., 2019, 21, 9672–9682, DOI: 10.1039/C8CP06919K.
Monte Carlo simulation of melting transition on DNA nanocompartment

Song Chang,Youdong Mao,Chunxiong Luo,Qi Ouyang

DOI: https://doi.org/10.1088/1742-6596/29/1/004

2006-01-01

Journal of Physics: Conference Series

Abstract:DNA nanocompartment is a typical DNA-based machine whose function is dependent of molecular collective effect. Fundamental properties of the device have been addressed via electrochemical analysis, fluorescent microscopy, and atomic force microscopy. Interesting and novel phenomena emerged during the switching of the device. We have found that DNAs in this system exhibit a much steep melting transition compared to ones in bulk solution or conventional DNA array. To achieve an understanding to this discrepancy, we introduced DNA-DNA interaction potential to the conventional Ising-like Zimm-Bragg theory and Peyrard-Bishop model of DNA melting. To avoid unrealistic numerical calculation caused by modification of the Peyrard-Bishop nonlinear Hamiltonian with the DNA-DNA interaction, we established coarse-gained Monte Carlo recursion relations by elucidation of five components of energy change during melting transition. The result suggests that DNA-DNA interaction potential accounts for the observed steep transition.

English Else
Overcoming systematic softening in universal machine learning interatomic potentials by fine-tuning

Bowen Deng,Yunyeong Choi,Peichen Zhong,Janosh Riebesell,Shashwat Anand,Zhuohan Li,KyuJung Jun,Kristin A. Persson,Gerbrand Ceder

2024-05-12

Abstract:Machine learning interatomic potentials (MLIPs) have introduced a new paradigm for atomic simulations. Recent advancements have seen the emergence of universal MLIPs (uMLIPs) that are pre-trained on diverse materials datasets, providing opportunities for both ready-to-use universal force fields and robust foundations for downstream machine learning refinements. However, their performance in extrapolating to out-of-distribution complex atomic environments remains unclear. In this study, we highlight a consistent potential energy surface (PES) softening effect in three uMLIPs: M3GNet, CHGNet, and MACE-MP-0, which is characterized by energy and force under-prediction in a series of atomic-modeling benchmarks including surfaces, defects, solid-solution energetics, phonon vibration modes, ion migration barriers, and general high-energy states.

Materials Science,Artificial Intelligence,Machine Learning
Machine Learning in Molecular Simulations of Biomolecules

Xing-Yue Guan,Heng-Yan Huang,Hua-Qi Peng,Yan-Hang Liu,Wen-Fei Li,Wang Wei

DOI: https://doi.org/10.7498/aps.72.20231624

2023-01-01

Abstract:Molecular simulation has already become a powerful tool for studying life principles at a molecular level.The past 50-year researches show that molecular simulation has been able to quantitatively characterize the kinetic and thermodynamic properties of complex molecular processes,such as protein folding and conformational changes.In recent years,the application of machine learning algorithms represented by deep learning has further promoted the development of molecular simulation.This work reviews machine learning methods in biomolecular simulation,focusing on the important progress made by machine learning algorithms in improving the accuracy of molecular force fields,the efficiency of molecular simulation conformation sampling,and also the processing of high-dimensional simulation data.The future researches to further overcome the bottleneck of accuracy and efficiency of molecular simulation,expand the scope of molecular simulation,and realize the integration of computational simulation and experimental based on machine learning technique is prospected.
Accurate and Transferable Machine Learning Potential for Molecular Dynamics Simulation of Sodium Silicate Glasses

Marco Bertani,Thibault Charpentier,Francesco Faglioni,Alfonso Pedone

DOI: https://doi.org/10.1021/acs.jctc.3c01115

2024-01-14

Journal of Chemical Theory and Computation

Abstract:An accurate and transferable machine learning (ML) potential for the simulation of binary sodium silicate glasses over a wide range of compositions (from 0 to 50% Na(2)O) was developed. The potential energy surface is approximated by the sum of atomic energy contributions mapped by a neural network algorithm from the local geometry comprising information on atomic distances and angles with neighboring atoms using the DeePMD code [Wang, H. Comput. Phys. Commun. 2018, 228, 178-184]. Our model was...

chemistry, physical,physics, atomic, molecular & chemical
Enhancing Open Quantum Dynamics Simulations Using Neural Network-Based Non-Markovian Stochastic Schrödinger Equation Method

Kaihan Lin,Xing Gao

2024-11-25

Abstract:The Non-Markovian Stochastic Schrodinger Equation (NMSSE) offers a promising approach for open quantum simulations, especially in large systems, owing to its low scaling complexity and suitability for parallel computing. However, its application at low temperatures faces significant convergence challenges. While short-time evolution converges quickly, long-time evolution requires a much larger number of stochastic trajectories, leading to high computational costs. To this end,we propose a scheme that combines neural network techniques with simulations of the non-Markovian stochastic Schrodinger equation. By integrating convolutional neural networks (CNNs) and long short-term memory recurrent neural networks (LSTMs),along with the iterative attentional feature fusion (iAFF) technique, this approach significantly reduces the number of trajectories required for long-time simulations, particularly at low temperatures, thereby substantially lowering computational costs and improving convergence. To demonstrate our approach, we investigated the dynamics of the spin-boson model and the Fenna-Matthews-Olson (FMO) complex across a range of parameter variations.

Quantum Physics,Chemical Physics
Reconciling simulated melting and ground-state properties of metals with a modified embedded-atom method potential

Gennady Sushko,Alexey Verkhovtsev,Christian Kexel,Andrei V. Korol,Stefan Schramm,Andrey V. Solov'yov

DOI: https://doi.org/10.1088/0953-8984/28/14/145201

2016-04-14

Abstract:We propose a modification of the embedded-atom method-type potential aiming at reconciling simulated melting and ground-state properties of metals by means of classical molecular dynamics. Considering titanium, magnesium, gold, and platinum as case studies, we demonstrate that simulations performed with the modified force field yield quantitatively correctly both the melting temperature of the metals and their ground-state properties. It is shown that the accounting for the long-range interatomic interactions noticeably affect the melting point assessment. The introduced modification weakens the interaction at interatomic distances exceeding the equilibrium one by a characteristic vibration amplitude defined by the Lindemann criterion, thus allowing for the correct simulation of melting, while keeping its behavior in the vicinity of the ground state minimum. The modification of the many-body potential has a general nature and can be applicable to metals with different characteristics of the electron structure as well as for many different molecular and solid state systems experiencing phase transitions.

Mesoscale and Nanoscale Physics,Materials Science
Deciphering melting behaviors of energetic compounds using interpretable Machine learning for melt-castable applications

Peng Chen,Haitao Liu,Yaoyao Linghu,Chaoyang Zhang,Xianfeng Wei,Xin Huang

DOI: https://doi.org/10.1016/j.cej.2023.147392

IF: 15.1

2023-11-16

Chemical Engineering Journal

Abstract:Melting behaviors of energetic compounds determine their thermo-responsive properties, which affects the manufacturing operations and structural stabilities. However, the decisive physicochemical mechanisms for melting behaviors of energetic compounds are absent, which hurdles the acceptancy and generalization of prediction models for rational molecular design. Herein, an interpretable machine learning (IML) approach was proposed to construct accurate prediction models for melting point values and melt-castable potentials of energetic compounds. A high-quality melting-point dataset comprising 239 neutral CHNO compounds was obtained, and the data was collected with strict criteria involving chemical formulations, crystal structures and experimental measurement operations. Tailored descriptors, which involve the priori insights for melting behaviors, were adopted for IML algorithms. The extreme gradient boosting model presents the best prediction accuracy (85 %) for the classification of melting point values between 273 K and 650 K; while 87 % accuracy is achieved for the classification of melt-castable property. Importantly, model interpretation assists to reveal that the close contacts between OC and NC, dipole, oxygen balance and the cohesive energy are decisive features for melting point prediction; while enthalpy of sublimation and polar surface area are paramount for the identification of melt-castable property. The ability to determine melting behaviors using IML will broaden the high-throughput screening of energetic compounds and offer valuable guidance towards molecular design.

engineering, chemical, environmental
Molecular Dynamics Simulation and Analysis of Bulk and Surface Melting Processes for Metal Cu

HL Wang,XX Wang,HY Liang

DOI: https://doi.org/10.3321/j.issn:0412-1961.2005.06.002

IF: 1.797

2005-01-01

ACTA METALLURGICA SINICA

Abstract:Molecular dynamics simulations of the bulk and surface melting processes were performed for metal Cu. The variations of the structure and energy in the system during bulk melting process were analyzed. The movement of the solid/liquid interface position during surface melting process was observed. The interaction between atoms in the system adopts the embedded atom potential proposed by Mishin. The simulation results show that the structure and energy in the system vary discontinuously at 1585 K in bulk melting process and the solid/liquid interface remains unchanged at 1380 K in the surface melting process. The different mechanisms of the two melting processes induce lower thermodynamic melting point (1380 K) than the bulk melting point (1585 K). Surface melting is significant in real melting process, so the experimental datum measured is the thermodynamic melting point. The simulated melting point coincides well with the experimental one, thus it can be concluded that the present melting point simulation method is correct and effective, and the Mishin's embedded atom potential is suitable for dealing with complicated and disordered systems.
Neural Networks Accelerate the Ab Initio Prediction of Solid-Solid Phase Transitions at High Pressures.

Yanqiang Han,Zhilong Wang,Jinjin Li

DOI: https://doi.org/10.1021/acs.jpclett.0c03101

IF: 6.888

2020-01-01

The Journal of Physical Chemistry Letters

Abstract:High-level ab initio chemical calculations, such as second-order Møller-Plesset perturbation (MP2), are highly accurate but time-consuming, making it inefficient to apply to macromolecular systems. Here, we propose a newly efficient approach based on the neural network and fragment method to predict the Gibbs free energy, structural characteristics, and thus phase transition of solid crystal structures. The proposed approach has the same prediction accuracy as the MP2 calculation but is hundreds of times faster than the MP2. The predicted structures and phase transitions of two selected ice phases (IX and XV) under extreme conditions are in excellent agreement with the MP2 calculations and experimental results but with an extremely low computational cost. It not only predicts the high-pressure structures and phase diagrams of solid systems accurately and efficiently but also solves the problem of extreme calculation cost during a high-precision theoretical study on high-pressure molecular crystals with potentially essential applications.
Neural network representation of electronic structure from $ab$ $initio$ molecular dynamics

Qiangqiang Gu,Linfeng Zhang,Ji Feng

DOI: https://doi.org/10.1016/j.scib.2021.09.010

2022-02-21

Abstract:Despite their rich information content, electronic structure data amassed at high volumes in $ab$ $initio$ molecular dynamics simulations are generally under-utilized. We introduce a transferable high-fidelity neural network representation of such data in the form of tight-binding Hamiltonians for crystalline materials. This predictive representation of $ab$ $initio$ electronic structure, combined with machine-learning boosted molecular dynamics, enables efficient and accurate electronic evolution and sampling. When applied to a one-dimension charge-density wave material, carbyne, we are able to compute the spectral function and optical conductivity in the canonical ensemble. The spectral functions evaluated during soliton-antisoliton pair annihilation process reveal significant renormalization of low-energy edge modes due to retarded electron-lattice coupling beyond the Born-Oppenheimer limit. The availability of an efficient and reusable surrogate model for the electronic structure dynamical system will enable calculating many interesting physical properties, paving way to previously inaccessible or challenging avenues in materials modeling.

Materials Science,Disordered Systems and Neural Networks

Exploring the Premelting Transition through Molecular Simulations Powered by Neural Network Potentials

Exploring the Premelting Transition through Molecular Simulations Powered by Neural Network Potentials

Towards Full Ab Initio Simulations of Mechanical Response of Ti-N Binary System under Extremely Operational Conditions Via Neural Network Potential

Molecular Dynamics Simulation Study of the Melting of Silver Nanoparticles

On the exploration of the melting behavior of metallic compounds and solid solutions via multiple classical molecular dynamics approaches: application to Al-based systems

Large Scale and Quantum Accurate Molecular Dynamics Simulation:Liquid Iron under Extreme Condition

Thermal structural disorder and melting transition in high-angle grain-boundary: a molecular-dynamics study

A comprehensive investigation on the accuracy and efficiency of methods for melting temperature calculation using molecular dynamics simulations

Efficient and accurate simulation of vitrification in multi-component metallic liquids with neural-network potentials

A Generic and Automated Methodology to Simulate Melting Point

A Critical Comparison of Neural Network Potentials for Molecular Reaction Dynamics with Exact Permutation Symmetry

Monte Carlo simulation of melting transition on DNA nanocompartment

Overcoming systematic softening in universal machine learning interatomic potentials by fine-tuning

Machine Learning in Molecular Simulations of Biomolecules

Accurate and Transferable Machine Learning Potential for Molecular Dynamics Simulation of Sodium Silicate Glasses

Enhancing Open Quantum Dynamics Simulations Using Neural Network-Based Non-Markovian Stochastic Schrödinger Equation Method

Reconciling simulated melting and ground-state properties of metals with a modified embedded-atom method potential

Deciphering melting behaviors of energetic compounds using interpretable Machine learning for melt-castable applications

Molecular Dynamics Simulation and Analysis of Bulk and Surface Melting Processes for Metal Cu

Neural Networks Accelerate the Ab Initio Prediction of Solid-Solid Phase Transitions at High Pressures.

Neural network representation of electronic structure from $ab$ $initio$ molecular dynamics