Abstract:Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spatial position. We characterize the properties of a six-port MSPL in the laboratory and perform the first testbed demonstration of the PLN in monochromatic light (1569 nm) and in broadband light (1450 nm to 1625 nm), each using two orthogonal polarizations. We compare the measured spatial throughput maps with those predicted by simulations using the lantern's modes. We find that the morphologies of the measured throughput maps are reproduced by the simulations, though the real lantern is lossy and has lower throughputs overall. The measured ratios of on-axis stellar leakage to peak off-axis throughput are around 10^(-2), likely limited by testbed wavefront errors. These null-depths are already sufficient for observing young gas giants at the diffraction limit using ground-based observatories. Future work includes using wavefront control to further improve the nulls, as well as testing and validating the PLN on-sky.

What problem does this paper attempt to address?

### What problems does this paper attempt to solve? This paper aims to demonstrate and verify a technology named Photonic Lantern Nuller (PLN) for detecting and characterizing exoplanets close to stars under monochromatic and broadband light conditions. Specifically, PLN utilizes the port symmetry of Mode - Selective Photonic Lantern (MSPL) to cancel out starlight, thereby enhancing the detection ability of nearby exoplanets. #### Main problems: 1. **Detecting and characterizing nearby exoplanets**: - Exoplanets are usually drowned in intense starlight because they are very close to their parent stars, making them difficult to observe directly. - PLN makes it possible to detect planets in a high - contrast environment by suppressing starlight and coupling planetary light. 2. **Technology verification**: - The paper presents the first test of PLN in a laboratory environment, including its performance under monochromatic light (1569 nm) and broadband light (1450 nm to 1625 nm). - The test used two orthogonal polarized lights to ensure the comprehensiveness and reliability of the results. 3. **Performance evaluation**: - The researchers compared the measured spatial flux maps with the simulation results to verify the actual performance of PLN. - The experimental results show that although there are certain losses in the actual device, it can still reach a sufficient nulling depth (about 10^-2) on a ground - based telescope, which is sufficient to observe young gas - giant planets. 4. **Future improvement directions**: - It is proposed to further improve the nulling depth through wavefront control and to apply PLN in actual astronomical observations for verification. #### Formula representation: The formulas involved in the paper mainly describe the beam - coupling efficiency and the influence of wavefront error on the coupling efficiency. For example, the coupling efficiency can be expressed as: \[ \eta \propto \left| \int_0^D e^{-\left(\frac{\pi D_f \rho}{f}\right)^2} e^{i\Phi(\rho, \phi)} dA \right|^2 \] where: - \( D \) is the aperture diameter, - \( D_f \) is the mode - field diameter of a single - mode fiber, - \( f \) is the focal length, - \( \Phi \) is the wavefront error. These formulas indicate that when the wavefront error \( \Phi \) is uniform, the coupling efficiency is the highest; any deviation will reduce the integral value and thus reduce the coupling efficiency. In conclusion, this paper is dedicated to developing and verifying a new instrument - the Photonic Lantern Nuller - to overcome the challenges encountered by traditional methods in detecting nearby exoplanets and to provide technical support for future astronomical observations.

Laboratory demonstration of a Photonic Lantern Nuller in monochromatic and broadband light

Efficient detection and characterization of exoplanets within the diffraction limit: nulling with a mode-selective photonic lantern

Coherent Imaging with Photonic Lanterns

Laboratory demonstration of an all-fiber-based focal plane nulling interferometer

Focal-plane wavefront sensing with photonic lanterns I: theoretical framework

Real-time experimental demonstrations of a photonic lantern wavefront sensor

Focal-plane wavefront sensing with photonic lanterns II: numerical characterization and optimization

Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

Demonstration of a photonic lantern low order wavefront sensor using an adaptive optics testbed

Design considerations of photonic lanterns for diffraction-limited spectrometry

On the Potential of Spectroastrometry with Photonic Lanterns

Spectroscopy using a visible photonic lantern at the Subaru telescope: Laboratory characterization and first on-sky demonstration on Ikiiki (α Leo) and `Aua (α Ori)

Spectral characterization of a 3-port photonic lantern for application to spectroastrometry

Demonstration of a photonic lantern focal-plane wavefront sensor: measurement of atmospheric wavefront error modes and low wind effect in the non-linear regime

On-sky speckle nulling through a single-mode fiber with the Keck Planet Imager and Characterizer

Broadband vortex fiber nulling: high-dispersion exoplanet science at the diffraction limit

Spectroscopy using a visible photonic lantern at the Subaru Telescope: Laboratory characterization and the first on-sky demonstration on Ikiiki (alpha Leo) and `Aua (alpha Ori)

Free-standing microscale photonic lantern spatial mode (De-)multiplexer fabricated using 3D nanoprinting

Demonstration of high-efficiency photonic lantern couplers for PolyOculus