Abstract:Muon Scattering Tomography (MST) has been shown to be a powerful technique for the non-invasive imaging of high-shielded objects. We present here the application of the MST technique to investigate two types of nuclear waste packages, a small-steel drum and a large nuclear waste cask, namely, a CASTOR V/52. We have developed a quantitative method using the contrast-to-noise ratio (CNR) to evaluate the performance of an MST detector system in differentiating between high-, medium-, and low-Z materials inside nuclear waste packages with different shielding types. This study reveals that our MST detector system is able to differentiate between a (10 $\times$ 10 $\times$ 10 cm$^3$) uranium cube, embedded within a concrete matrix inside the small-steel drum, and regions of background signal in six hours of muon exposure time with a CNR value of 3.1$\pm$0.2. During our investigation of the highly-shielded cask, the reconstructed images of the cask contents indicated the ability of our system to detect irregular baskets, such as empty baskets, with a CNR value of 5.0$\pm$0.3 after 30 days of muon exposure. These studies were done using a Monte Carlo simulation tuned to the performance of resistive plate chambers (RPCs) based muon tomography system built by the University of Bristol, which had a reported position resolution of 350 micron. Here we also report the dependence of the performance on the position resolution. We argue that using a combination of RPC and drift chambers (DC) detectors with 700 micron and 4 mm position resolutions respectively is able to generate tomographic images of well-shielded materials in a few hours of muon exposure time. With these position resolutions, our system needs six hours of muon exposure time to produce a good quality image of a cube of uranium with side-length of 10 cm shielded by a concrete matrix with CNR value of 2.4$\pm$0.25.

Design of an atmospheric muon tomographer for material identification based on CORSIKA+GEANT4 simulations

Using Cosmic Ray Muons to Assess Geological Characteristics in the Subsurface

Detection and Imaging of High-Z Materials with a Muon Tomography Station Using GEM Detectors

Performance Expectations for a Tomography System Using Cosmic Ray Muons and Micro Pattern Gas Detectors for the Detection of Nuclear Contraband

Exploring Advanced Detector Technologies for Muon Radiography Applications

Towards a muon scattering tomography system for both low-Z and high-Z materials

Design and Construction of a First Prototype Muon Tomography System with GEM Detectors for the Detection of Nuclear Contraband

A new detector for glaciers melting monitoring through muon tomography

A High Spatial Resolution Muon Tomography Prototype System Based on Micromegas Detector

GEANT4 Simulation of a Cosmic Ray Muon Tomography System with Micro-Pattern Gas Detectors for the Detection of High-Z Materials

A portable muon telescope for multidisciplinary applications

Effect of passive metallic layers on muon energy estimation by means of deflection angle for muon scattering tomography: A comparative study based on GEANT4 simulations

Prototype Cherenkov Detector Characterization for Muon Tomography Applications

A Novel Readout Scheme for Muon Tomography Application in Material Identification

Muons tomography applied to geosciences and volcanology

Imaging of high-Z material for nuclear contraband detection with a minimal prototype of a Muon Tomography station based on GEM detectors

A quantitative assessment of Imaging High-Z and Medium-Z materials using Muon Scattering Tomography

GEANT4 Simulation of a Scintillating-Fibre Tracker for the Cosmic-ray Muon Tomography of Legacy Nuclear Waste Containers

Experimental Validation of Material Discrimination Ability of Muon Scattering Tomography at the TUMUTY Facility

Muon Detector for Underground Tomography

Material discrimination in cosmic muon imaging using Pattern Recognition Method