Abstract:In this paper, we study an intelligent reflecting surface (IRS)-aided radar-communication (Radcom) system, where the IRS is leveraged to help Radcom base station (BS) transmit the joint of communication signals and radar signals for serving communication users and tracking targets simultaneously. The objective of this paper is to minimize the total transmit power at the Radcom BS by jointly optimizing the active beamformers, including communication beamformers and radar beamformers, at the Radcom BS and the phase shifts at the IRS, subject to the minimum signal-to-interference-plus-noise ratio (SINR) required by communication users, the minimum SINR required by the radar, and the cross-correlation pattern design. In particular, we consider two cases, namely, case I and case II, based on the presence or absence of the radar cross-correlation design and the interference introduced by the IRS on the Radcom BS. For case I where the cross-correlation design and the interference are not considered, we prove that the dedicated radar signals are not needed, which significantly reduces implementation complexity and simplifies algorithm design. Then, a penalty-based algorithm is proposed to solve the resulting non-convex optimization problem. Whereas for case II considering the cross-correlation design and the interference, we unveil that the dedicated radar signals are needed in general to enhance the system performance. Since the resulting optimization problem is more challenging to solve as compared with the case I, the semidefinite relaxation (SDR) based alternating optimization (AO) algorithm is proposed. Particularly, instead of relying on the Gaussian randomization technique to obtain an approximate solution by reconstructing rank-one solution, the tightness is achieved by our proposed reconstruction strategy. Simulation results demonstrate the effectiveness of proposed algorithms and also show the superiority of the proposed scheme over various benchmark schemes.

An Optimal Baseband Delay-Based Beam Squint Removal Scheme across a Range of Steering Angles for Digital Wideband Beamformers in Radars

Time-Variant Focusing Range-Angle Dependent Beampattern Synthesis By Uniform Circular Frequency Diverse Array Radar

Mitigation of Beam Squint Effects for Wideband Beamforming Using Time-Modulated Arrays

Efficient Time Delay Compensation at Beamforming Using Subband Decomposition for Wideband Phased Array Radar

An Integrated Optical Beamforming Network for Two-Dimensional Phased Array Radar

Radio Frequency Beamforming Based on a Complex Domain Frontend

Wide‐angle Beam Steering Achieved by an Array‐fed Phase Reconfigurable Metasurface

Wideband Jamming Cancellation for Wideband Phased Array Radar: Digital Beamforming Architecture and Preliminary Results

Wideband Beamforming for Near-Field Communications with Circular Arrays

A Reconfigurable Active Beamforming Array for Biomedical Radar Applications

Digital Compensation Wideband Analog Beamforming For Millimeter-Wave Communication

5.4 A 22.4-to-30.7ghz Phased-Array Receiver with Beam-Pattern Null-Steering and Beam-Tracking Techniques Achieving >30.2db OTA-Tested Spatial Rejection

A wideband beamforming method based on real time delay

A short wave radar beam sharpening method based on generalised oblique projection operator with flexible parameter

Digital Adaptive Wideband Beamforming Without Pre-Steering Delay Processing

Wideband Beamforming for Hybrid Phased Array Terahertz Systems

Robust Beamforming Based on Covariance Matrix Reconstruction in FDA-MIMO Radar to Suppress Deceptive Jamming

Beam Squint in Ultra-Wideband Mmwave Systems: RF Lens Array Vs. Phase-Shifter-Based Array

A Novel Adaptive Digital Beamforming Method Based on Beam-Space Phase-Center Cross Correlation

A Novel Beam Squint Compensation Technique for Circularly Polarized Conic-Section Reflector Antennas

Joint Active and Passive Beamforming Design for IRS-Aided Radar-Communication