Abstract:High-entropy alloys, a new class of metallic materials, exhibit excellent mechanical properties at high temperatures. In spite of the worldwide interest, the underlying mechanisms for temperature dependence of mechanical properties of these alloys remain poorly understood. Here, we systemically investigate the mechanical behaviors and properties of Al 1.2 CrFeCoNi (comprising a body-centered cubic phase) and Al 0.3 CrFeCoNi (comprising a face-centered cubic phase) single-crystal micropillars with three orientations ([100], [110], and [111]) at temperatures varying from 300 to 675 K by using in situ compression of micropillars inside a scanning electron microscope. The results show that the yield stresses of Al 1.2 CrFeCoNi micropillars are insensitive to temperature changes, and their flow stresses and work hardening rates increase slightly with increasing temperature from 300 to 550 K, which differs from the typical temperature dependence of yield/flow stresses in metals and alloys. In contrast, Al 0.3 CrFeCoNi micropillars exhibit typical thermal softening. Furthermore, it is found that the Al 1.2 CrFeCoNi micropillars exhibit a transition from homogenous deformation to localized deformation at a critical temperature, while the Al 0.3 CrFeCoNi micropillars always maintain a well-distributed and fine slip deformation. Detailed transmission electron microscopy analyses reveal that dynamic recrystallization (involving dislocation tangles, and formation of dislocation cell structures and sub-grains) plays a key role in the observed temperature insensitivity of the yield stress and increasing flow stress (and work hardening rate) with increasing temperature in the Al 1.2 CrFeCoNi micropillars, and that thermally activated dislocation slip leads to thermal softening of the Al 0.3 CrFeCoNi micropillars. The differences in deformation modes and temperature dependence of the mechanical properties between Al 1.2 CrFeCoNi and Al 0.3 CrFeCoNi essentially originate from the differences in dislocation activities and slip systems since the two alloys adopt different phases. Our findings provide key insights in the temperature dependence of mechanical properties and deformation behaviors of high-entropy alloys with body-centered cubic and face-centered cubic phases.

The influence of the phase and structural state on the low-temperature elastic properties of molybdenum-alloyed non-equiatomic high-entropy alloys of the Fe-Co-Ni-Cr system

Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

Unraveling the Deformation Behavior of the Fe45Co25Ni10V20 High Entropy Alloy

THE INFLUENCE OF CHEMICAL COMPOSITION ON SOLID SOLUTION AND STRAIN HARDENING OF SINGLE CRYSTALS OF FCC HIGH-ENTROPY ALLOYS

Cryogenic Mechanical Behaviors of CrMnFeCoNi High-Entropy Alloy

Dynamic recrystallization-induced temperature insensitivity of yield stress in single-crystal Al 1.2 CrFeCoNi micropillars

Real-time Nanoscale Observation of Deformation Mechanisms in CrCoNi-based Medium- to High-Entropy Alloys at Cryogenic Temperatures

Hot Deformation Characteristics and Microstructure Evolution of CoCrFeNiZr0.3 Hypoeutectic High-Entropy Alloy

Influence of deformation on the structure and the mechanical properties of a high-entropy Fe25Cr20Ni20Co10Mn15Al10 alloy

Thermoelastic Martensitic Transformation and Shape Memory Effect in [001]-Oriented Single Crystals of High-Entropy Alloy

Experimental and Theoretical Investigations on the Phase Stability and Mechanical Properties of Cr7Mn25Co9Ni23Cu36 High-Entropy Alloy

Dynamic mechanical responses of the Al0·1CoCrFeNi high entropy alloy at cryogenic temperature

Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy

Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures

Dynamic tensile mechanisms and constitutive relationship in CrFeNi medium entropy alloys at room and cryogenic temperatures

Low and Room Temperatures Tensile Properties of a Nanoprecipitate-Strengthened (fecocr)40ni40al10cu10 High-Entropy Alloy

Unveiling the Stacking Fault-Driven Phase Transition Delaying Cryogenic Fracture in Fe-Co-Cr-Ni-Mo-C-Based Medium-Entropy Alloy

Dynamic recrystallization behavior of single-phase BCC structure AlFeCoNiMo0.2 high-entropy alloy

Influence of Deformation Temperature on Shape Memory Effect of Fe–Mn–Si–Ni–Cr Alloy

Deformation mechanisms of Al0.1CoCrFeNi at elevated temperatures