High-temperature stability of ambient-cured one-part alkali-activated materials incorporating graphene for thermal energy storage

Nghia Tran,Tuan Nguyen,Jay Black,Tuan Ngo
2024-02-21
Abstract:In this research, the ambient cured one part alkali activated material (AAM) containing graphene nanoplatelets (GNPs), fly ash, slag and silica fume has been investigated after high temperature exposure to 200 to 800oC. Their compressive strength, thermal properties, microstructure, pore structure were characterised through visual observation, isothermal calorimetry, TGA, XRD, SEM-EDS and X-ray CT. The research findings indicated high strength characteristics of the developed AAM (80 MPa) at ambient condition, which could further reach to approx. 100 MPa after being heated up to 400oC. GNPs provided nucleation effects for promoting geopolymerisation and crystallisation. As observed from X-ray CT, a high extent of severe cracks initiated from the core and propagated towards the surface. From SEM-EDS analysis, high Na-Al and Na-Si ratios or low Si-Al and Ca-Si ratios highly correlated to thermal stability. Overall, the research outcomes implied the promising use of the nano-engineered AAMs for thermal energy storage (TES) at 400 to 600oC.
Materials Science,Applied Physics
What problem does this paper attempt to address?
This paper mainly studies the high-temperature stability of an environmentally cured one-part alkali-activated material (AAM) containing graphene nanosheets (GNPs) for thermal energy storage. It is found that this AAM exhibits high strength properties at room temperature (approximately 80 MPa), which can be enhanced to about 100 MPa when heated to 400°C. GNPs help to promote geopolymerization reactions and crystallization. Severe cracks are observed within the material through X-ray micro-computed tomography (X-ray μCT), and SEM/EDS analysis suggests that the high-temperature stability is highly correlated with high Na/Al or Na/Si ratios or low Si/Al and Ca/Si ratios. The results indicate that this nano-engineered AAM shows potential for thermal energy storage at temperatures ranging from 400-600°C. The study also emphasizes the importance of considering the mechanical properties and energy storage capacity of AAM at high temperatures.