Abstract:We consider a motorized aircraft tethered to a central anchorage point in a configuration similar to a control line model airplane. For this system, we address the problem of automatic take-off and landing (ATOL) with a circular path, whose center and radius are defined by the anchorage point and the tether length, respectively. We propose a hierarchical control architecture for ATOL and discuss the controllers designed for each control layer and for each of the flight phases. Simulation results are reported, showing the viability of the approach, but also showing the limitations on the maximum altitude attainable with a fixed-tether length. The tethered aircraft and the proposed ATOL control architecture are to be used in an Airborne Wind Energy System.

What problem does this paper attempt to address?

This paper attempts to address the problem of achieving automatic take-off and landing (ATOL) for fixed-wing, powered, tethered aircraft in Airborne Wind Energy Systems (AWES). Specifically, the paper focuses on how to achieve such automatic take-off and landing on a circular path, where the center and radius are defined by the tether point and the length of the tether, respectively. ### Main Issues 1. **Control of Automatic Take-Off and Landing**: Develop a reliable automatic take-off and landing control system that allows the tethered aircraft to autonomously complete the take-off and landing process on a predetermined circular path. 2. **Flight Path Planning**: Design a hierarchical control architecture to ensure smooth transitions between different flight phases (such as acceleration, rotation, initial climb, hovering, deceleration, taxiing, landing, etc.). 3. **System Performance Verification**: Verify the effectiveness and limitations of the proposed control strategies through simulations and small-scale prototype tests, particularly the relationship between the maximum achievable altitude and the fixed tether length. ### Application Background Airborne Wind Energy Systems (AWES) are devices that capture high-altitude wind energy and convert it into electrical energy using autonomous aircraft connected to a ground station via a tether. These systems can capture stronger and more stable wind energy at higher altitudes, generating underutilized renewable energy. However, to make AWES a commercially viable and competitive renewable energy technology, it must be able to operate safely and reliably autonomously for extended periods under various weather and environmental conditions. Currently, most existing AWES technologies still rely on supervised operation, especially during take-off and landing phases, making the realization of fully autonomous ATOL solutions crucial. ### Research Methods - **Hierarchical Control Architecture**: A hierarchical control architecture is proposed, including a high-level supervisory controller and low-level speed and altitude controllers. - **Controller Design**: Different controllers are designed for each flight phase, including simple PID controllers and multivariable optimal regulators (LQR). - **Simulation and Experimental Verification**: The feasibility and performance of the proposed control strategies are verified through simulations and small-scale prototype tests. ### Conclusion - **Feasibility**: The research results indicate that the proposed automatic circular take-off and landing method is feasible and can achieve autonomous operation of tethered aircraft. - **Limitations**: Simulation results show that the fixed tether length limits the maximum achievable altitude of the aircraft, providing important references for future designs. By addressing these issues, this research provides important technical support for achieving more autonomous and efficient airborne wind energy systems.

Automatic Circular Take-off and Landing of Tethered Motorized Aircraft

Autonomous Take-Off and Flight of a Tethered Aircraft for Airborne Wind Energy

Autonomous take-off and landing of a tethered aircraft: a simulation study

A Small-Scale Prototype to Study the Take-Off of Tethered Rigid Aircrafts for Airborne Wind Energy

TIE: an Autonomous and Adaptive Terrestrial-Aerial Quadrotor

An Optimal Control Framework for Airborne Wind Energy Systems with a Flexible Tether

Automatic crosswind flight of tethered wings for airborne wind energy: modeling, control design and experimental results

Autonomous hanging tether management and experimentation for an unmanned air‐surface vehicle team

Automatic Retraction and Full Cycle Operation for a Class of Airborne Wind Energy Generators

Motion Control for a Manned Evtol Aircraft with Cross Tilting Propellers

Multibody modelling of tether and capture system for dynamic simulations of In-Air capturing

Design of an Over-Actuated Hexacopter Tilt-Rotor for Landing and Coupling in Power Transmission Lines

Adaptive Tracking Control for Tethered Aircraft Systems With Actuator Nonlinearities and Output Constraints

Drag-Mitigating Dynamic Flight Path Design and Sensitivity Analysis for an Ultra-Long Tether Underwater Kite

Real-time Optimization and Adaptation of the Crosswind Flight of Tethered Wings for Airborne Wind Energy

Robust Stabilized Control for Electric Vertical Take-Off and Landing (eVTOL) Fixed-Wing Aircraft

An Aerodynamic Feedforward-Feedback Architecture for Tailsitter Control in Hybrid Flight Regimes

Composite Control of a Tethered Underwater Flight Vehicle

Control of a Rigid Wing Pumping Airborne Wind Energy System in all Operational Phases

Aerodynamic Feedforward-Feedback Architecture for Tailsitter Control in Hybrid Flight Regimes

Extended State Observer-Based Continuous Finite Time Control for a Fixed-Wing Vertical Take-Off and Landing Unmanned Aerial Vehicle