CFD-DEM modeling of fracture initiation with polymer injection in granular media

Daniyar Kazidenov,Yerlan Amanbek

2024-02-03

Abstract:We numerically study mechanisms and conditions of fracture initiation in granular material induced by non-Newtonian polymer solutions. A coupling approach of computational fluid dynamics and discrete element method is utilized to model the fluid flow in a porous medium. The flow behavior of polymer solutions and drag force acting on particles are calculated based on a power-law model. The adequacy of the numerical model is confirmed by comparing the results with a laboratory experiment. The numerical results are consistent with the experimental data presenting similar tendencies in dimensionless parameters that incorporate fluid flow rate, rheology, peak pressure, and confining stress. Results show that fluid flow rate, rheology, and solid material characteristics strongly influence fracture initiation behavior. Injecting a more viscous guar-based solution results in wider fractures induced by a grain displacement. A less viscous XG-based solution creates more linear fractures dominated by an infiltration. The peak pressure ratio between two fluids is higher in rigid material compared to softer material. Finally, the dimensionless parameters $1/\Pi_1$ and $\tau_2$, which consider fluid and solid material properties accordingly, are good indicators in determining fracture initiation induced by shear-thinning fluids. Our numerical results show that fracture initiation occurs above $1/\Pi_1 = 0.06$ and $\tau_2 = 2\cdot 10^{-7}$.

Computational Engineering, Finance, and Science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: **To study the mechanisms and conditions for the initiation of fractures when injecting non - Newtonian polymer solutions in porous media**. Specifically, the author simulated the flow behavior of non - Newtonian fluids in particulate media and their influence on fracture initiation by coupling computational fluid dynamics (CFD) and the discrete element method (DEM).

### Main problems
1. **Fracture initiation mechanisms**:
- To study how fractures form in particulate media when injecting non - Newtonian polymer solutions.
- To explore the influence of different fluid characteristics (such as viscosity, shear - thinning, etc.) on fracture initiation.

2. **Analysis of influencing factors**:
- To analyze the influence of fluid flow rate, rheological characteristics, and solid material characteristics (such as Young's modulus, friction coefficient, etc.) on fracture initiation behavior.
- To evaluate the specific manifestations of fracture initiation under different conditions (such as different injection rates, stress conditions, etc.).

3. **Numerical model verification**:
- To verify the effectiveness of the proposed CFD - DEM coupling model by comparing with laboratory experimental data.
- To confirm whether the numerical model can accurately predict fracture initiation behavior.

4. **Establishment of fracture initiation criteria**:
- To propose fracture initiation criteria based on dimensionless parameters for predicting whether fractures will occur under specific conditions.
- To focus on two key dimensionless parameters \( \frac{1}{\Pi_1} \) and \( \tau_2 \), which respectively reflect the influence of fluid characteristics and solid material characteristics on fracture initiation.

### Formula summary
The formulas involved in the paper include:

- **Power - law model to describe polymer flow behavior**:
\[
\mu(\dot{\gamma}) = K \dot{\gamma}^{n - 1}
\]
where \( K \) and \( n \) are the consistency and flow behavior indices respectively.

- **Dimensionless parameter \( \Pi_1 \)**:
\[
\Pi_1=\frac{P_{peak}}{K\left(\frac{k^{3/2}}{Q}\right)^{n}}
\]

- **Dimensionless parameter \( \tau_2 \)**:
\[
\tau_2 = \frac{\mu'v}{lE}
\]
where \( \mu'=\mu_f(\phi) \) is the apparent viscosity of the fluid - particle mixture, \( v \) is the injection speed, \( l \) is the inlet characteristic length, and \( E \) is the Young's modulus of the solid material.

Through these studies, the author aims to gain an in - depth understanding of the complex mechanisms by which non - Newtonian fluids initiate fractures in particulate media and to provide theoretical support and technical guidance for related engineering applications.