Abstract:This paper presents a noncontact sliding table design and measurements of its performance via ultrasonic levitation. A slider placed atop two vibrating guide rails is levitated by an acoustic radiation force emitted from the rails. A flexural traveling wave propagating along the guide rails allows noncontact transportation of the slider. Permitting a transport mechanism that reduces abrasion and dust generation with an inexpensive and simple structure. The profile of the sliding table was designed using the finite-element analysis (FEA) for high levitation and transportation efficiency. The prototype sliding table was made of alumina ceramic (Al2O3) to increase machining accuracy and rigidity using a structure composed of a pair of guide rails with a triangular cross section and piezoelectric transducers. Two types of transducers were used: bolt-clamped Langevin transducers and bimorph transducers. A 40-mm long slider was designed to fit atop the two rail guides. Flexural standing waves and torsional standing waves were observed along the guide rails at resonance, and the levitation of the slider was obtained using the flexural mode even while the levitation distance was less than 10 microm. The levitation distance of the slider was measured while increasing the slider's weight. The levitation pressure, rigidity, and vertical displacement amplitude of the levitating slider thus were measured to be 6.7 kN/m2, 3.0 kN/microm/m2, and less than 1 microm, respectively. Noncontact transport of the slider was achieved using phased drive of the two transducers at either end of the vibrating guide rail. By controlling the phase difference, the slider transportation direction could be switched, and a maximum thrust of 13 mN was obtained.

Non-contact linear slider for cryogenic environment

Engineering and performance of a contactless linear slider based on superconducting magnetic levitation for precision positioning

Dynamics of a Superconducting Linear Slider

Improving Resolution and Run Outs of a Superconducting Noncontact Device for Precision Positioning

Superconducting Noncontact Device for Precision Positioning in Cryogenic Environments

An ultrasonically levitated noncontact stage using traveling vibrations on precision ceramic guide rails

Novel cryogenic motion control for aerospace

Design and Experimental Validation of a Linear Piezoelectric Micromotor for Dual-Slider Positioning

Characterization and Improvement of Axial and Radial Stiffness of Contactless Thrust Superconducting Magnetic Bearings

Development of a Suspension Type Sliding Planar Motion Table Using Magnetic Fluid Lubrication

Levitation Force of Small Clearance Superconductor–magnet System under Non-Coaxial Condition

Linear cooling of a levitated micromagnetic cylinder by vibration

Lateral Displacement Influence on the Levitation Force of YBCO Coated Conductor Linear Bearings

Model and Control of a Compact Long-Travel Accurate-Manipulation Platform

A Miniaturized Dual-Slider Linear Actuator Using Electrostatic Adhesion and Inertia Drive

Design, Control of an Aerostatic X-Y Planar Motion Stage for Precision Positioning

A Self-Attachable and Self-Alignable Micro Electromagnetic Linear Actuator

Design Study of a High Loading Superconducting Magnetically Levitated Planar Motor

On A Novel Magnet-Driven Linear Actuator With Long Stroke And Nano-Positioning Accuracy

Adaptive Sliding Mode Control for Magnetic Suspension Short-Stroke Stage in A Reticle Stage

High-Q magnetic levitation and control of superconducting microspheres at millikelvin temperatures