Abstract:The electric vehicles are fast developed as the demand for energy conservation and environment protection. The permanent magnet synchronous motors (PMSM) are widely used in electric vehicles because of their high efficiency. However, due to the DC/AC inverter with fixed switching frequency was used to drive the PMSM, high-frequency vibration and acoustic noise were generated in the PMSM. And the frequency at which vibration and noise are generated is related to the switching frequency of the inverter and its integral multiple. Spread spectrum theory shows that the energies of a fixed high-frequency spectrum can be distributed into a wide range of frequencies. Therefore the concentrated energies can be weakened. This theory can be complied with the PMSM control strategy to help to reduce the high-frequency vibration and noise. This paper presents control strategies with changing the switching frequency in order to reduce the vibration and noise of the electric motor. Firstly, four control strategies with different switching frequency: fixed switching frequency (FSF), periodic switching frequency (PSF), random switching frequency (RSF) and hybrid switching frequency (HSF) are modelled and simulated by MATLAB-Simulink. During this process of simulation, the influence from the modulate rate and spread width to the reduction of harmonic amplitude was detailedly analyzed. Secondly, these four control strategies are implemented by the dSPACE MicroAutoBoxIIfor the rapid control prototyping (RCP) test. Thirdly, the vibration and noise tests of the PMSM are complied in the semi-anechoic chamber using software and devices from the LMS Test. Lab. Finally, the results of simulation and tests are compared and analyzed. Based on the simulation and test results, these three optimized control strategies can suppress the high frequency current harmonic amplitude significantly and the noise and vibration reduction difference among them are not apparently. Comprehensive analysis shows that the random and hybrid switching frequency control strategy proves to achieve better the goal of reducing the amplitude of high-frequency vibration and noise.

Discontinuous PWM Strategy with Frequency Modulation for Vibration Reduction in Asynchronous Machines

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

Pulse width modulation technique with harmonic injection in the modulating wave and discontinuous frequency modulation for the carrier wave to reduce vibrations in asynchronous machines

Pulse-Width Modulation Technique With Harmonic Injection in the Modulating Wave and Discontinuous Frequency Modulation for the Carrier Wave for Multilevel Inverters: An Application to the Reduction of Acoustic Noise in Induction Motors

PWM strategy with harmonics injection and modulated frequency triangular carrier. A review

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

Carrier-Based Variable Frequency PWM Technique for PMSM Drives to Achieve Dispersed Spectrum and Extended Low-Speed Operation Capability

Vibration Reduction for Dual-Branch Three-Phase Permanent Magnet Synchronous Motor with Carrier Phase-Shift Technique

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

An Optimal Periodic Carrier Frequency PWM Scheme for Suppressing High-Frequency Vibrations of Permanent Magnet Synchronous Motors

Smooth Voltage PWM for Vibration and Acoustic Noise Reduction in Switched Reluctance Machines

Hybrid Periodic Carrier Frequency Modulation Technique Based on Modified SVPWM to Reduce the PWM Noise

The PWM Strategy in Full Modulation Region for Dual Three-phase-induction Motors Based on Vector Decomposition and Superposition Principle

Improved Vector Sequence Modulation Strategy for Suppressing Conducted EMI in Three-Phase PMSMs

Inverter Harmonic Suppression for Permanent Magnet Synchronous Machine Drives Based on Discontinuous SVPWM With Variable Switching Frequency

Reduction of high-frequency vibration noise for dual-branch three-phase permanent magnet synchronous motors

Eliminating Common Mode Voltage and Suppressing Conducted EMI Based on Discontinuous PWM for General Two-Unit PMSMs

Strategy of Synchronized SVPWM for Dual Three-Phase Machines in Full Modulation Range

The Control Strategy Research on Reduction of High-Frequency Noise and Vibration for Permanent Magnet Synchronous Motor

Research on Control Strategy for Vibration and Noise Reduction of Permanent Magnet Synchronous Motor

High‐frequency Pulse Width Modulation Noise Reduction for Permanent Magnet Synchronous Motors Using Hybrid Asymmetrical Regular Sampled Modified Space‐vector Pulse Width Modulation