Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

An Equation-Free Based Data-Driven Coupling Approach for Prediction of Long-term Cryogenic Propellent Tank Behaviors Combining CFD and Nodal Modeling Techniques

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

An Undecomposed Hybrid Algorithm for Nonlinear Coupled Constitutive Relations of Rarefied Gas Dynamics

A New Coupled Computational Method in Conjunction with Three-Dimensional Finite Volume Schemes for Nonlinear Coupled Constitutive Relations

A Computational Strategy for Nonlinear Coupled Constitutive Relations of Rarefied Nonequilibrium Flows on Unstructured Grids

A Three-Dimensional Finite Volume Method for Conservation Laws in Conjunction with Modified Solution for Nonlinear Coupled Constitutive Relations

Data-driven Nonlinear Constitutive Relations for Rarefied Flow Computations

Analytical Method of Nonlinear Coupled Constitutive Relations for Rarefied Non-Equilibrium Flows

Modeling and Simulation of Cryogenic Propellant Tank Pressurization in Normal Gravity

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

Efficient Finite Element Analysis/Computational Fluid Dynamics Thermal Coupling for Engineering Applications

Simulation of a Bubble-Column Reactor by Three-Dimensional CFD: Multidimension- and Function-Adaptive Network-Based Fuzzy Inference System

- 1-development and validation of high-precision cfd method with volume-tracking algorithm for gas-liquid two-phase flow simulation on unstructured mesh i 1

A Data-Driven Phase Change Model for Injection Flow Modeling

Multi-Mesh Approach for Geometry-Independent Neutronic/Thermal-Hydraulics Coupling Analyses Using RMC and Ansys Fluent

A multi-stage coupling adaptive method for thermochemical nonequilibrium gas

Partitioned Coupled Heat Transfer Fluid-Structure Interaction for Transient and Steady State Analysis of Aero Engines Applications

Advanced CFD modeling of rod bundle channels with integrated porous media and momentum source schemes

Real-time data assimilation for the thermodynamic modeling of cryogenic storage tanks

Predictions of Line Chilldown Boiling Regime Transitions by a Coupled CFD-Subgrid Boiling Model Validated against 1G LN2 Experiments

Gas-Liquid Phase Recirculation in Bubble Column Reactors: Development of a Hybrid Model Based on Local CFD – Adaptive Neuro-Fuzzy Inference System (ANFIS)