Abstract:INTRODUCTION High resolution diffusion tensor imaging is a desirable technique to improve the depiction of neural anatomy structures. Earlier work has shown that the feasibility of achieving high resolution diffusion tensor imaging using an interleaved variable-density spiral (VDS) [1] readout trajectory and iterative phase correction algorithm (SNAILS technique) [2]. However, this technique requires long acquisition time even for low directional resolution, such as 6 directions. With parallel imaging [3], the acquisition speed can be increased, but higher acceleration factor for parallel imaging introduces amplified noise which then hinders the practical application. CORNOL reconstruction [4] has been proved to be effective in noise suppression and image structure preservation for high acceleration acquisitions. This study combines highly accelerated parallel imaging and VDS for high resolution DTI. Improved CORNOL (iCORNOL) which is tailored for VDS DTI is employed for artifacts suppression. To our knowledge, it is the first time to develop high spatio-temporal resolution DTI on Philips 3T MRI scanner. METHODS An interleaved VDS [1] diffusion weighted sequence was implemented on a Philips 3T clinical scanner (Achieva, Philips, Best, The Netherlands) equipped with a high performance gradient set (60mT/m per gradient axis, slew rate 200mT/m/msec). Brain images were acquired from three healthy volunteers using an 8-channel head coil. Scan parameters were: b = 600 s/mm, FOV = 220 × 220 mm, matrix size = 256 × 256, slice thickness = 5 mm, TR/TE = 2500/80ms, α = 3 (α is the parameter controlling the sampling density), number of interleaves = 24, readout duration for each interleave = 16.9ms (3456 points), acquisition bandwidth = 100 kHz, diffusion encoding directions = 6. All subjects provided informed written consent. For parallel imaging, reduction factor was 4. iCORNOL (refer to our another abstract 4341 for technical details) reconstruction was compared with conjugate gradient SENSE (CG-SENSE)[5]. All reconstruction methods were combined with direct phase subtraction. RESULTS AND DISCUSSIONS The first row in Fig.1 shows b0 image, diffusion weighted image, trace map and FA map from fully sampled data. 2 row in Fig.1 shows results from undersampled data reconstructed by CG-SENSE. With a reduction factor as high as 4, aliasing artifacts are unacceptable. Additionally, CG-SENSE reconstruction introduced significant noise which decreases the accuracy of high resolution diffusion tensor imaging. This problem can be better visualized from the FA map, from which no contrast information can be acquired. 3 row of Fig. 1 shows the iCORNOL reconstructed image using the same set of under sampled data as 2 row. Blurring and aliasing artifacts are largely alleviated, structure information and contrast are mostly preserved. Moreover, SNR loss is much smaller compared to images reconstructed from CG-SENSE. Parallel imaging based on SENSE reconstruction provides a choice to reduce the total scan time but may introduce amplified noise that can dramatically degrade the quality of final images, regularization alleviates the problem by imposing priors on parallel imaging reconstruction. iCORNOL, which is exclusively tailored for VDS, uses intrastructure smoothness to preserve the image structure and reduces noise, and achieves significant improvements of image quality in this experiment. VDS is one of optimal choices for multi-shot diffusion weighted imaging due to its self-navigating capability and insensitivity to motion. Another advantage of variable density trajectory is the incoherent undersampling artifacts, which make it suitable for nonlinear reconstruction methods. One drawback of VDS is its sensitivity to eddy current. This problem could be lessened by measuring spiral trajectories, which were widely studied. CONCLUSIONS: A high spatio-temporal resolution DTI sequence was implemented on Philips 3T clinical scanner and iCORNOL was applied for the highly accelerated acquisition reconstruction. Previous studies using parallel imaging method for high resolution DTI had a reduction factor up to 3 [6]. Our preliminary results demonstrated that scan time can be further reduced by a factor of four with well-reserved structure details and considerable high SNR. Further studies are needed to optimize the sequence parameter and reconstruction algorithm. ACKNOWLEDGEMENT: This work is supported by National Key Technology R&D Program in the 12th Five year Plan. The authors would like to thank Dr. Dong-hyun Kim for helpful discussions. REFERENCE: [1] Dong-hyun Kim et al. MRM 2003; 50:214-219. [2] Chunlei Liu et al. MRM 2004; 52:1388-1396 [3] Pruessmann KP et al. MRM 1999; 42:952-962. [4] Sheng Fang et al. MRM 2010; 64:1414-1426. [5] Pruessmann KP et al. MRM 2001; 46:638-651; [6] Chunlei Liu et al. MRM 2004; 52:1388-1396. b = 0 DWI Trace map FA map

Self-navigated 3D diffusion MRI using an optimized CAIPI sampling and structured low-rank reconstruction

3D-EPI Blip-Up/Down Acquisition (BUDA) with CAIPI and Joint Hankel Structured Low-Rank Reconstruction for Rapid Distortion-Free High-Resolution T2* Mapping

3D-CAIPI-BUDA and Joint Hankel Low-Rank Reconstruction Enable Rapid and Distortion-free High-Resolution T2* Mapping and QSM

Rapid 3D Dynamic Arterial Spin Labeling with a Sparse Model-Based Image Reconstruction

Sampling strategies and integrated reconstruction for reducing distortion and boundary slice aliasing in high‐resolution 3D diffusion MRI

Simultaneous Multi-Slice Diffusion Imaging using Navigator-free Multishot Spiral Acquisition

3D Diffusion MRI Using Simultaneous Multi-slab with Blipped-CAIPI (Blipped-SMSlab) in a 4D K-space Framework

Multifold Acceleration of Diffusion MRI Via Deep Learning Reconstruction from Slice-Undersampled Data.

Three-dimensional Diffusion MRI Using Simultaneous Multislab with Blipped-Caipi in a 4D K-Space Framework.

Submillimeter diffusion MRI using an in-plane segmented 3D multi-slab acquisition and denoiser-regularized reconstruction

High-resolution whole-brain diffusion MRI at 3T using simultaneous multi-slab (SMSlab) acquisition

DWI using navigated interleaved multishot EPI with realigned GRAPPA reconstruction

High-resolution diffusion-weighted imaging with interleaved variable-density spiral acquisitions

Score-based Diffusion Models With Self-supervised Learning For Accelerated 3D Multi-contrast Cardiac Magnetic Resonance Imaging

Self-Learned Kernel Low Rank Approach TO Accelerated High Resolution 3D Diffusion MRI

Acceleration of Multi-Direction Diffusion MRI Using EPI with Keyhole (EPIK) and Locally Low-Rank Tensor Reconstruction.

Reconstruction for 7T High‐resolution Whole‐brain Diffusion MRI Using Two‐stage N/2 Ghost Correction and L1‐SPIRiT Without Single‐band Reference

Efficient Parallel Reconstruction for High Resolution Multishot Spiral Diffusion Data with Low Rank Constraint

3D Diffusion MRI with Twin Navigator-Based GRASE and Comparison with 2D EPI for Tractography in the Human Brain.

High Resolution DTI using Highly Undersampled Variable Desnity Acquisition and iCORNOL Reconstruction