Abstract:Metal organic framework (MOF) is a supramolecular coordination material composed of metal ions coordination, nodes, and organic ligands. MOFs were used as active materials for chemical capacitors to realize the high electrochemical performance, providing adequate redox sites and accelerating ion diffusion rate. Using MOF as a template to fabricate a novel platform can deliver large specific surface areas and abundant oxidation-active sites to augment electrical conductivity. The electrode material based on a MOF has a unique morphology that can significantly shorten charge transport paths to alleviate the electron transport and diffusion, thus strengthening the catalytic performance of the electrode materials. Also, the incorporation of vanadium in the intermediate leads to a broad impact on the morphology and the electrochemical energy storage of Cobalt-Trimesic matrix worked as a base for fabricating the composite. The DMF is a solvent to prepare the vanadium cobalt oxide composite derived using the MOF matrix. Trimesic acid is used as an initial organic linker precursor to initiate the formation of MOF of cobalt in DMF solvent. Then the vanadium ion is integrated into the same material matrix. In this study, the impact of organic system precursors and the integration of annealing play a pivotal role in alleviating the enhanced electrochemical storage response. After analyzing through XRD, the corresponding MOF crystal peaks are prominently affirmed. The high intensified peaks in the obtained patterns symbolize the oxide phase of cobalt vanadium and confirm the formation derived from MOF. The FTIR spectroscopy investigation depicted the proper presence of cobalt, vanadium, carbon, and nitrogen. The observed FESEM morphology illustrated the dissimilar structure and involved in the charge storage likewise. The morphology significantly impacts surface-dependent charge storage with having porosity introduced. High-temperature annealing also consists of the crystal orientation of the bi-metallic MOF matrix and creates porosity on the effective surface area. The Co-MOF-V oxide composite is thoroughly investigated individually in three-electrode arrangements for analyzing the electrochemical charge storage in 2MKOH represented in Fig.1 (c-d). Firstly, the oxide is scrutinized as working positive electrodes and measured in the potential window of -0.2 to 0.6 V w.r.t the saturated calomel reference electrode. The accomplished specific capacitance value from the cyclic voltammetry plot is 549 F/g at 2mV/s scan rate. Furthermore, the charge-discharge analysis of the composite delineated an admirable discharge time at 3mA/cm2 current density. It portrayed 349 F/g specific capacitance, leading to higher specific energy and specific power of 31.02Wh/kg and 159.53W/kg at the value of the same current density. The Nyquist plot corroborates that the electrode resistance, electrode-electrolyte interfacing resistance, and the value of diffuse layer resistance are significantly less. This study can bestow a greater pathway of ion transportation from the electrolyte to active electrode material that abetted to conversate superior storage using complete morphology. The transition metal possesses a variational oxidation state that directly contributes to this MOF composite's pseudocapacitive charge storage process. Alternatively, comparable analysis is directed over anode material that is lignocellulose derived activated porous carbon. It is depicted in Fig.1(e-f) in the potential window of -1 to 0v w.r.t the Ag/AgCl electrode in 2M KOH. The gained specific capacitance from the cyclic voltammetry analysis is 426 F/g at a 2mV/s scan rate. Besides, the charge-discharge study of the same carbon depicted admirable discharge time at 0.5A/g current density and portrayed 565 F/g specific capacitance. The specific energy and power of 78.47Wh/kg and 282W/kg at the same current density. Also, the integrated porous system with the high active surface area, which significantly comes from the MOF matrix, provides an added phase to strengthen the amount of storage like EDLC formation. Furthermore, combining both of those active materials, the asymmetric supercapacitor storage is made up [Fig.1 (g-h)]. That system works upon 0 to 1.4V windows. The attained areal capacitance is 0.54 F/cm 2, and volumetric capacitance is 0.68 F/cm 3 in the current density of 4mA/cm 2 . The Ragone plot shows its perfect positioning in the region of asymmetric storage. This ASC system delineated coulombic efficiency 79% of capacitive retention 75% after the 10,000 long cycle stability study. From the electrochemical impedance spectroscopy analysis, the obtained interfacing and electrode resistance diffuse layer resistance is found significantly lesser and upwards. Figure 1

Electrochemically enhanced battery-type Ni substituted CaMo-MOF electrodes: Towards futuristic energy storage system

A Metal-Organic Framework Derived Hierarchical Nickel-Cobalt Sulfide Nanosheet Array on Ni Foam with Enhanced Electrochemical Performance for Supercapacitors

Assembly of Metal-Organic Frameworks on Transition Metal Phosphides As Self-Supported Electrodes for High-Performance Hybrid Supercapacitors.

A novel MOF-derived binary metal oxides and carbon nanocomposite for high-performance symmetric supercapacitor application

In Situ Electrochemical Synthesis Of Rod-Like Ni-Mofs As Battery-Type Electrode For High Performance Hybrid Supercapacitor

Bimetallic MnFe 2 -MOF and Its Derived MnFe 2 O 4 Nanostructures for Supercapacitive Applications

Synergistic enhancement of electrochemical performance of NiFe2O4@Ni-MOF nanoflake hybrids for high-performance energy storage applications

Tailoring the Effect of NiCo‐Metal‐Organic Frameworks by Doping Manganese as a Highly Active Redox Electrode for Electrochemical Energy Storage Technologies: Supercapattery Devices

Highly Dispersive Nickel Vanadium Oxide Nanoparticles Anchored on Nickel Cobalt Phosphate Micron-Sheets As Cathodes for High-Energy Hybrid Supercapacitor Devices

Constructing metal organic framework derived manganese cobalt layered double hydroxide nanosheets on Ni foam as cost-effective binder-free electrodes of high-performance supercapacitors

Improving the electrochemical characteristics by synergy effect of MoO3-Nb2O5 nanocomposite for high energy supercapacitor

Fabrication and assembly of supercapacitors based on Ni-based MOFs and their derivative materials for enhancing their electrochemical performances

Synergistic integration of three‐dimensional architecture composed of two‐dimensional nanostructure ternary metal oxide for high‐performance hybrid supercapacitors

Crafting nanoflower-built MnCo2S4 anchored to Ni foam as a prominent energy conversion and energy storage electrode for high-performance supercapacitor applications

Unlocking the potential of a MOF-derived CaMoO 4 electrode for high performance supercapacitor application

(Digital Presentation) Vanadium Intercalated Cobalt Trimesic MOF Composite for Enhanced Solid-State Asymmetric Supercapacitor Storage

Electrodeposition of porous metal-organic frameworks for efficient charge storage

Construction of Hierarchical NiCo2O4@Ni-MOF Hybrid Arrays on Carbon Cloth As Superior Battery-Type Electrodes for Flexible Solid-State Hybrid Supercapacitors.

Highly Conductive Mo2C Nanofibers Encapsulated in Ultrathin MnO2 Nanosheets As a Self-Supported Electrode for High-Performance Capacitive Energy Storage.

Asymmetric Supercapacitor Performance Enhancement Through Fe-Doped MoS2 Nanosheets Synthesized via Hydrothermal Method

Mixed-Metallic Mof Based Electrode Materials For High Performance Hybrid Supercapacitors