Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Core loss determination in electric machines using short‐time transient thermal measurements

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Loss Investigation for Multiphase Induction Machine under Open-Circuit Fault Using Field–Circuit Coupling Finite Element Method

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Measurement and Modelling of the Rotational Core Losses in an Induction Machine at Different Load Conditions

An Accurate Iron Core Loss Model in Equivalent Circuit of Induction Machines

Novel Empirical Model for Calculation of Core Losses in Permanent Magnet Machines

Winding Function-Based Analytical Modeling of Core Loss in an Induction Machine Considering Slotting Effects and the Frequency-Dependent B-H Curve Characteristics

Fast Iron Loss and Thermal Prediction Method for Power Density and Efficiency Improvement in Switched Reluctance Machines

High Frequency Magnetic Core Loss Study

Heat transfer study on a stator-permanent magnet electric motor: A hybrid estimation model for real-time temperature monitoring and predictive maintenance

An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply

Evaluation of stator core loss of high speed motor by using thermography camera

Core Loss Analysis of Transverse Flux Tubular Motor in Variable-Speed Reciprocating Periodic Motion Mode

Experimental study of a teeth flux sensor for detection, location and severity evaluation of induction machine stator faults

Core Loss Equivalent Resistance Modeling of Small- and Medium-Sized Converter-Fed Induction Motors Considering Supply and Spatial Harmonics

A Hybrid Data-Driven Approach in Magnetic Core Loss Modeling for Power Electronics Applications

A Utility and Accurate Electrical Loss Model and Application for Induction Motors Utilizing 2-D Finite Element Analysis

Study on core loss of high speed PM machine

Simulation of iron losses in induction machines using an iron loss model for rotating magnetization loci in no electrical steel