Abstract:In particle therapy for cancer treatment, the radiation dose to tissues around the tumour can be reduced by employing a rotating gantry—a mechanical structure allowing the delivery of the particle beam to the patient from various angles. Gantries for ion therapy can benefit from the integration of superconducting magnets to minimize the size and weight of the machine. One significant challenge associated with the supporting system of superconducting elements is related to the management of their accuracy during both alignment and operational phases. Concurrently, heat flow from room temperature to cryogenic temperatures through the supporting system must be restricted as the ratio of power needed to operate the cooling system is around 1000 times the power extracted at cryogenic temperature. The design of the supports must consider the variability of the load during operation, i.e. guarantee accuracy of the cold-mass pose (position and rotation) under its own weight during a gantry rotation. A literature review had been done highlighting the possible application of a novel exact-constrained solution for the support of superconducting magnets. Within the framework of the European project HITRIplus (heavy Ion Therapy Research Integration), this study proposes the design and optimization of a support system based on a degrees of freedom parallel mechanism (exactly constrained kinematics). A mathematical model is proposed, referred as "error model", to estimate the accuracy of the pose of the cold-mass due to major unrecoverable errors. The error model estimates the contribution of main error sources: the elasticity of the supports, the elasticity of the vacuum vessel enclosure and the influence of backlash in the joints. An optimization genetic algorithm has been developed and employed to find the optimal configuration of supports that simultaneously increases the accuracy and minimizes heat-loads to the cold-mass. The error model has been validated by finite element analysis, showing its validity for the optimization process. The optimised solution has been compared to solutions that were proposed initially based on common sense, intuition and had been manually refined: the optimized solution shows considerable improvements in the overall accuracy of the system and a substantial reduction of the heat-loads. The optimized solution also implements a pre-load system to eliminate backlash in the joints: this considerably improves the accuracy of the system. The error model presented allows computationally cheaper optimizations and variations of the designed architecture (i.e. variation in cross sections, change in material, change in geometry, implementation of pre-load etc...) with respect to a classic approach based only on finite element analysis. Furthermore, thanks to the kinematics characteristic of the proposed architecture, the 6-legs design clears the way for a more reliable implementation of an automated positioning system with respect to classical over-constrained architectures.

Perceptions of plain and branded cigarette packaging among Norwegian youth and adults: a focus group study.

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Design of a 6-supports exactly constrained supporting system for superconducting magnets and its application to rotating gantries for cancer therapy

Design study of a superconducting gantry for carbon beam therapy

Magnetic Design of a Compact GaToroid for Very High Energy Electron and Pre-Clinical Hadron Beams

A Carbon-Ion Superconducting Gantry and a Synchrotron Based on Canted Cosine Theta Magnets

Medical therapy and imaging fixed-field alternating-gradient accelerator with realistic magnets

A Combined Testing and Modelling Methodology for the Mechanics of High-Field Superconducting Magnets

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

Optimizing the use of pressurized bladders for the assembly of HL-LHC MQXFB magnets

Conceptual Design Studies on the Magnet System for the Volumetric Neutron Source

Magnet Design for the High-Intensity Muon Beams Project (HIMB) at PSI's Accelerator Complex HIPA

Design and Magnetic Field Measurement of the Superconducting Magnets for the Next-Generation Rotating Gantry

Elliptical Halbach magnet and gradient modules for low-field portable MRI

Axial Magnetic Field Distribution Simulation and Optimization in Rotating Magnetron Sputtering System

Therapie bei malignen Lidtumoren

SU-E-T-20: Removal of Electron Contamination in Longitudinal Field MRI-Linac Systems: A Monte Carlo Study

Monte Carlo modeling of the origin of contaminant electrons on a 0.5T bi‐planar Linac‐MR

Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF

Magnetization in superconducting corrector magnets and impact on luminosity-calibration scans in the Large Hadron Collider

Induced radioactivity in rare-earth permanent magnets at 2.5GeV electron accelerator