Abstract:Mill scale is the metallurgical waste produced by the rolling mill in the steel hot rolling process. This hazardous waste is mainly composed of oxide iron, such as hematite, magnetite and wustite. It may have a different and alternative final destination by becoming a catalyst for wastewater treatment. In this work, the catalytic potential of mill scale (MS) from a steel plant was evaluated for hexavalent chromium reduction from synthetic and real matrices under slurry conditions (MS particles dispersed in the solution) or immobilized in Raschig rings. Experiments were conducted in an annular photoreactor irradiated by UVA light. Raschig rings were coated with MS by electrostatic link with polyethylene-grafted-maleic anhydride copolymer (PEGMA) film, and further packed in the annular zone of the UV photoreactor. SEM, XRD and FTIR analysis showed a homogeneous film of MS firmly attached on Raschig rings surface. In this way, the iron-rich industrial steel waste acted as both source of iron and photocatalyst, allowing the reduction of Cr(VI) to Cr(III) in the bulk solution and MS surface, respectively, in the presence of tartaric acid as hole and hydroxyl scavenger and Fe-complexing agent. The Raschig rings (248 g) coated with MS (23 g) achieved total Cr(VI) reduction (below detection limit) after 45 min of reaction (k = 2.0 × 10-2 mg L-1 min- 1) under UVA radiation, considering the following initial conditions: [Cr(VI)]0 = 10 mg L-1, [tartaric acid]0/[Cr(VI)]0 molar ratio = 6:1, pH = 3.0, T = 25 °C. The same system was tested for the treatment of a real effluent from a galvanic industry containing 6 mg L-1 of Cr(VI). Using the same tartaric acid/Cr(VI) molar ratio (6:1) and pH 3.0, the Cr(VI) present in the effluent was totally reduced (below detection limit) in 360 min (k = 1.93 × 10-2 mg L- 1 min- 1), showing similar kinetic behavior as the process with the synthetic matrix. In all experiments, the concentrations of dissolved iron (Fe(II) and Fe(total)) were below the disposal limit established by Brazilian legislation, and total chromium removal was achieved by Cr(III) precipitation after the photocatalytic reaction.

Energy Recovery from Hexavalent Chromium Reduction for In Situ Electrocatalytic Hydrogen Peroxide Production

Remediation of Chromium-Slag Leakage with Electricity Cogeneration Via a Urea-Cr(vi) Cell

Removal of Hexavalent Chromium from Wastewater by Cu/Fe Bimetallic Nanoparticles

Reclamation of hexavalent chromium using catalytic activity of highly recyclable biogenic Pd(0) nanoparticles

Treatment mechanism of hexavalent chromium wastewater in constructed wetland-microbial fuel cell coupling system

Removal of Cr(VI) from aqueous systems using Fe P slag as a reducing agent

Electrocatalytic reduction of Cr(VI) over heterophase MoS2 film electrode

Combination of Electroreduction with Biosorption for Enhancement for Removal of Hexavalent Chromium

Electric Field‐Assisted Uptake of Hexavalent Chromium Ions with In Situ Regeneration of Carbon Monolith Adsorbents

Reduction Remediation of Hexavalent Chromium by Bacterial Flora in Cr(Vi) Aqueous Solution

Industrial steel waste recovery pathway: Production of innovative supported catalyst and its application on hexavalent chromium reduction studies

Efficient One-Step Removal and Immobilization of Recalcitrant Cr(III) and Cr(VI) Fractions in Real Electroplating Wastewater Using Electrolysis with O2 Aeration

Effects of Hydraulic Retention Time on Removal of Cr (VI) and p-Chlorophenol and Electricity Generation in L. hexandra-Planted Constructed Wetland–Microbial Fuel Cell

Recovering chromium from electroplating sludge using an integrated technology of bipolar membrane electrodialysis and H2O2 oxidation

Use of an Environmental Pollutant From Hexavalent Chromium Removal as a Green Catalyst in The Fenton Process

Selective and Efficient Photoextraction of Aqueous Cr(VI) As a Solid-State Polyhydroxy Cr(V) Complex for Environmental Remediation and Resource Recovery.

Energy Harvest from Contaminants Via Coupled Redox Fuel Cells

Removal and recycling of hexavalent chromium from alkaline wastewater via a new ferrite process to produce the valuable chromium ferrite

Highly Efficient Photoelectrocatalytic Reduction of Hexavalent Chromium Based on the Cascade Energy Transfer Towards Using No Semiconducting Photocatalysts

Hexavalent chromium elimination from wastewater by integrated micro-electrolysis composites synthesized from red mud and rice straw via a facile one-pot method

Electrochemical synthesis of PANI-ERGO composite electrode and its application in the reduction of hexavalent chromium