Abstract:Commercial supercapacitors using available carbon products have long been criticized for the under-utilization of their prominent specific surface area (SSA). In terms of carbonaceous electrode optimization, excessive improvement in SSA observed in the gaseous atmosphere might have little effect on the final performance because cracked/inaccessible pore alleys considerably block the direct electrolyte ion transport in a practical electrochemical environment. Herein, mesopore-adjustable hierarchically porous carbon nanosheets are fabricated based on a micelle-size-mediated spatial confinement strategy. In this strategy, hydrophobic trimethylbenzene in different volumes of the solvent can mediate the interfacial assembly with a carbon precursor and porogen segment through pi-pi bonding and van der Waals interaction to yield micelles with good dispersity and the diameter varying from 119 to 30 nm. With an increasing solvent volume, the corresponding diffusion coefficient (3.1-14.3 m(2) s(-1)) of as obtained smaller micelles increases, which makes adjacent micelles gather rapidly and then grow along the radial direction of oligomer aggregates to eventually form mesopores on hierarchically porous carbon nanosheets (MNC150-4.5). Thanks to the pore expansion effect of trimethylbenzene, the mesoporous volume can be adjusted from 28.8 to 40.0%. Mesopores on hierarchically porous carbon nanosheets endow MNC150-4.5 with an enhanced electrochemically active surface area of 819.5 m(2) g(-1), which gives rise to quick electrolyte accessibility and a correspondingly immediate capacitive response of 338 F g-1 at 0.5 A g(-1 )in a three electrode system. Electrolyte transport through pathways within MNC150-4.5 ultimately enables the symmetric cell to deliver a high energy output of 50.4 Wh kg-1 at 625 W kg-1 in a 14 m LiOTF electrolyte and 95% capacitance retention after 100,000 cycles, which show its superior electrochemical performance over representative carbon-based supercapacitors with aqueous electrolytes in recent literature.

Molten‐Salt Synthesis of Anthracite‐Based Porous Carbon for Microscale Supercapacitors and Strain Sensors

One-Pot Ultrafast Molten-Salt Synthesis of Anthracite-Based Porous Carbon for High-Performance Capacitive Energy Storage

Porous Doped Carbons from Anthracite for High-Performance Supercapacitors

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Cooking Carbon with Protic Salt: Nitrogen and Sulfur Self-Doped Porous Carbon Nanosheets for Supercapacitors

Coal-Based Nanoporous Carbon Electrode for High-Performance Supercapacitor: Surface and Diffusion Charge Kinetics in Aqueous and Non-Aqueous Electrolytes

Spatial Confinement Strategy for Micelle-Size-Mediated Modulation of Mesopores in Hierarchical Porous Carbon Nanosheets with an Efficient Capacitive Response

Facile Construction Of Highly Redox Active Carbons With Regular Micropores And Rod-Like Morphology Towards High-Energy Supercapacitors

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Molten Salt Electrosynthesis of Cr 2 AlC-DerivedPorous Carbon for Supercapacitors

Molten Salt Synthesis of Two-Dimensional Sheet-Like Nitrogen-Cobalt Co-Doped Porous Carbon Nanosheets for High-Performance Supercapacitors

Design and structure optimization of coal-based hierarchical porous carbon by molten salt method for high-performance supercapacitors

Constructing the Interconnected and Hierarchical Nanoarchitectonics in Coal-Derived Carbon for High-Performance Supercapacitor

One-pot molten salt-assisted synthesis of nitrogen-doped mesoporous carbon for high energy density supercapacitors

Nickel Acetate-Assisted Graphitization of Porous Activated Carbon at Low Temperature for Supercapacitors With High Performances

Bimolecular Salt Strategy Enhances Heteroatom Doping and Porosity Optimization of Porous Carbon for Supercapacitors

Porous carbons originated from gelatin through molten salt templating in conjunction with chemical activation for ultracapacitors

N/O Co-doped Porous Carbon with Controllable Porosity Synthesized via an All-in-One Step Method for a High-Rate-Performance Supercapacitor

Molten salt assisted self-activated carbon with controllable architecture for aqueous supercapacitor

Molten salt synthesis of porous carbon and its application in supercapacitors: A review

Molten Salt-Confined Construction of Nitrogen-Doped Hierarchical Porous Carbon for High-Performance Supercapacitors