Abstract:Traditional ytterbium-doped high-power fiber lasers generally use a unidirectional output structure. To reduce the cost and improve the efficiency of the fiber laser, we propose a bidirectional output fiber laser (BOFL). The BOFL has many advantages over that of the traditional unidirectional output fiber laser (UOFL) and has a wide application in the industrial field. In theory, the model of the BOFL is established, and a comparison of the nonlinear effect in the traditional UOFL and the BOFL is studied. Experimentally, high-power continuous wave (CW) and quasi-continuous wave (QCW) BOFLs are demonstrated. In the continuous laser, we first combine the BOFL with the oscillating amplifying integrated structure, and a near-single-mode bidirectional 2 × 4 kW output with a total power of above 8 kW is demonstrated. Then, with the simple BOFL, a CW bidirectional 2 × 5 kW output with a total power of above 10 kW is demonstrated. By means of pump source modulation, a QCW BOFL is developed, and the output of a near-single mode QCW laser with a peak output of 2 × 4.5 kW with a total peak power of more than 9 kW is realized. Both CW and QCW output BOFL are the highest powers reported at present.

What problem does this paper attempt to address?

The paper mainly addresses the following issues: 1. **Proposing a novel bidirectional output ytterbium-doped high-power fiber laser (BOFL)**: Traditional ytterbium-doped high-power fiber lasers usually adopt a unidirectional output structure. To reduce costs and improve efficiency, the authors propose a bidirectional output fiber laser (BOFL). Compared to traditional unidirectional output fiber lasers (UOFL), BOFL has numerous advantages and is widely used in industrial fields. 2. **Theoretical modeling and nonlinear effects analysis**: The paper establishes a theoretical model of BOFL and studies the nonlinear effects in traditional UOFL and BOFL through this model. Experimental verification shows that BOFL is superior to UOFL in suppressing stimulated Raman scattering (SRS) and transverse mode instability (TMI). 3. **Experimental verification**: The experiments demonstrate the performance of continuous wave (CW) and quasi-continuous wave (QCW) BOFL. In continuous laser operation, a near-single-mode bidirectional output of 2×4 kW was achieved with a total power exceeding 8 kW by combining an oscillation amplification integrated structure. Additionally, a simple BOFL structure achieved a CW bidirectional output of 2×5 kW, with a total power exceeding 10 kW. QCW BOFL was developed through pump source modulation, achieving a near-single-mode QCW laser peak output of 2×4.5 kW, with a total peak power exceeding 9 kW. 4. **Increasing output power**: BOFL exhibits excellent performance in suppressing nonlinear effects, which helps to further increase the output power of the laser system. Especially in the absence of TMI limitations, BOFL has more advantages over UOFL. In summary, this paper aims to improve the output power and efficiency of lasers by introducing bidirectional output fiber lasers and theoretically and experimentally verifies their superiority.

Novel Bidirectional Output Ytterbium-Doped High Power Fiber Lasers: From Continuous to Quasi-Continuous

2 × 4.5 kW bidirectional output near-single-mode quasi-continuous wave monolithic fiber laser

Optimization and demonstration of a bidirectional output linear-cavity fiber laser with a record high power of 2 × 4 kW

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

1.75‐Kilowatt continuous‐wave output fiber laser using homemade ytterbium‐doped large‐core fiber

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency

A 1150-W 1018-Nm Fiber Laser Bidirectional Pumped by Wavelength-Stabilized Laser Diodes

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

A 6.4-kW peak power near-single-mode quasi-continuous wave fiber laser oscillator employing spindle-shaped ytterbium-doped fiber

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Experimental study of 30 W CW fiber laser by two-end pumping

Optimization and demonstration of 6 kW oscillating-amplifying integrated fiber laser employing spindle-shaped fiber to suppress SRS and TMI

A 3.5-kW near-single-mode oscillating–amplifying integrated fiber laser

1.1-Kw Ytterbium Monolithic Fiber Laser with Assembled End-Pump Scheme to Couple High Brightness Single Emitters

Directly diode and bi-directional pumping 6 kW continuous-wave all-fibre laser

Dual-wavelength high-power Yb-doped double-clad fiber laser based on a few-mode fiber Bragg grating

Numerical Analysis and Experimental Results of Output Characteristics for Strongly Pumped Yb3+-doped Double-Clad Fiber Laser

Power scalability of a continuous-wave high-power Er-Yb co-doped fiber amplifier pumped by Yb-doped fiber lasers

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber