Abstract:Computer vision in the structural health monitoring (SHM) field has become popular, especially for processing unmanned aerial vehicle (UAV) data, but still has limitations both in experimental testing and in practical applications. Prior works have focused on UAV challenges and opportunities for the vibration-based SHM of buildings or bridges, but practical and methodological gaps exist specifically for linear infrastructure systems such as pipelines. Since they are critical for the transportation of products and the transmission of energy, a feasibility study of UAV-based SHM for linear infrastructures is essential to ensuring their service continuity through an advanced SHM system. Thus, this study proposes a single UAV for the seismic monitoring and safety assessment of linear infrastructures along with their computer vision-aided procedures. The proposed procedures were implemented in a full-scale shake-table test of a natural gas pipeline assembly. The objectives were to explore the UAV potential for the seismic vibration monitoring of linear infrastructures with the aid of several computer vision algorithms and to investigate the impact of parameter selection for each algorithm on the matching accuracy. The procedure starts by adopting the Maximally Stable Extremal Region (MSER) method to extract covariant regions that remain similar through a certain threshold of image series. The feature of interest is then detected, extracted, and matched using the Speeded-Up Robust Features (SURF) and K-nearest Neighbor (KNN) algorithms. The Maximum Sample Consensus (MSAC) algorithm is applied for model fitting by maximizing the likelihood of the solution. The output of each algorithm is examined for correctness in matching pairs and accuracy, which is a highlight of this procedure, as no studies have ever investigated these properties. The raw data are corrected and scaled to generate displacement data. Finally, a structural safety assessment was performed using several system identification models. These procedures were first validated using an aluminum bar placed on an actuator and tested in three harmonic tests, and then an implementation case study on the pipeline shake-table tests was analyzed. The validation tests show good agreement between the UAV data and reference data. The shake-table test results also generate reasonable seismic performance and assess the pipeline seismic safety, demonstrating the feasibility of the proposed procedure and the prospect of UAV-based SHM for linear infrastructure monitoring.

An Online Pipeline Structural Health Monitoring Method Based on the Spatial Deformation Fitting

Monitoring of pipelines subjected to interactive bending and dent using distributed fiber optic sensors

A New Health Monitoring Technique On Submarine Pipeline

Structural Health Monitoring of Composite Pipelines Utilizing Fiber Optic Sensors and an AI-Based Algorithm-A Comprehensive Numerical Study

Pipeline structural health monitoring using distributed fiber optic sensing textile

A Practical Algorithms On Health Monitoring Of Submarine Pipeline And Its Application

Unmanned Aerial Vehicle-Based Structural Health Monitoring and Computer Vision-Aided Procedure for Seismic Safety Measures of Linear Infrastructures

Damage Location Method of Pipeline Structure by Ultrasonic Guided Wave Based on Probability Fusion

A New Stress Monitoring Method for Mechanical State of Buried Steel Pipelines under Geological Hazards

Development and Sea Trial of Real-Time Offshore Pipeline Installation Monitoring System

A spatiotemporal correlation and attention-based model for pipeline deformation prediction in foundation pit engineering

Compressed Sensing Method for Health Monitoring of Pipelines Based on Guided Wave Inspection

Cost-effective, vision-based multi-target tracking approach for structural health monitoring

A vessel motion based pipeline safety installation assist system

Online Hybrid Learning Methods for Real-Time Structural Health Monitoring Using Remote Sensing and Small Displacement Data

Optimization for Pipeline Corrosion Sensor Placement in Oil-Water Two-Phase Flow Using CFD Simulations and Genetic Algorithm

Structural Monitoring And Performance Assessment Of Shield Tunnels During The Operation Period, Based On Distributed Optical-Fiber Sensors

An Analytical Method for Mechanical Analysis of Offshore Pipelines during Lifting Operation

Underground Pipeline Mapping from Multipositional Data: Data Acquisition Platform and Pipeline Mapping Model.

Quasi-Distributed Fiber Sensor-Based Approach for Pipeline Health Monitoring: Generating and Analyzing Physics-Based Simulation Datasets for Classification

Spatio-Temporal Evolution of Loading and Deformation of Surface Gas Pipelines for High-Intensity Coalbed Mining and Its Integrity Prediction Methodology