Effect of spermine and N1-dansyl-spermine on epileptiform activity in mouse cortical slices.

B. Kirby,G. G. Shaw

DOI: https://doi.org/10.1016/J.EJPHAR.2005.09.009

IF: 5.195

2005-11-07

European Journal of Pharmacology

Abstract:

What problem does this paper attempt to address?

Photon-Weight-Reallocated Stimulated Emission Depletion Nanoscopy

Zhimin Zhang,Dazhao Zhu,Yubing Han,Minfei He,Liang Xu,Wenli Tao,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1021/acsphotonics.3c00922

IF: 7

2023-01-01

ACS Photonics

Abstract:A novel optimization concept called "photon weight reallocation" is proposed to evaluate the significance of individual photons in an image, filtering out useless photons while preserving effective ones. This process aims to minimize background noise and enhance the resolution of the image. By leveraging a honeycomb array detector and fluorescence lifetime detection, photon weight reallocation is implemented in stimulated emission depletion (STED) nanoscopy through the fusion of the spatial and temporal photon weights. This approach yields exceptional results in terms of background and noise suppression and resolution enhancement. The experimental results demonstrate significant improvements in both the signal-to-background ratio and peak signal-to-background ratio within dense sample areas of STED after applying the photon-weight-reallocation process, achieving maximum improvements by factors of 8.9 and 37.3, respectively. Besides, the axial and lateral resolutions of STED are improved by factors of 1.55 and 1.36, respectively, following this process.
Simulation of Dynamic Light Scattering Signal Based on AR Model

Yan Min Zhang,Xing Guang Qi,Qing Hua Li

DOI: https://doi.org/10.4028/www.scientific.net/amm.571-572.840

2014-01-01

Applied Mechanics and Materials

Abstract:According to the autocorrelation function (ACF) of the ultrafine particles, the auto-regressive (AR) model used for dynamic light scattering (DLS) signals simulation can be established. By the method, DLS signals for nanoparticles distribution are simulated respectively and every ACF of simulation signal performs a great agreement with its theory value. The simulation signals were respectively inversed and inversion errors are less than 5.25%. The particles size inversions of Photon Correlation Spectroscopy (PCS) are obtained by Morozov discrepancy principle. Experiments show that the method based on AR model is feasible in DLS signal simulation.
X-Ray Fluorescence Correlation Spectroscopy: A Method for Studying Particle Dynamics in Condensed Matter

J Wang,Ak Sood,Pv Satyam,Yp Feng,Xz Wu,Zh Cai,Wb Yun,Sk Sinha

DOI: https://doi.org/10.1103/physrevlett.80.1110

IF: 8.6

1998-01-01

Physical Review Letters

Abstract:Photon correlation spectroscopy probing fluctuations in scattered or fluorescent intensity to study particle dynamics in fluids is by now well established in the visible light regime. With the advent of high-brilliance synchrotron radiation sources, correlation spectroscopy utilizing scattered radiation has recently been extended to the x-ray wavelength regime by using spatially coherent x-rays to study the time fluctuations of the corresponding speckle patterns. In this presentation, we report the development of a new technique, x-ray fluorescence correlation spectroscopy (XFCS) for elucidating the dynamics of particles. This technique does not require coherent beams but relies on intense microfocused x-ray beams. Further, it is element specific. As a demonstration of this method, the dynamics of gold colloidal particles and aggregates undergoing diffusion and sedimentation in water was studied by measuring the time autocorrelation of the gold fluorescence intensity from a small illuminated volume. The values of the translational diffusion constants and sedimentation velocities obtained are in excellent agreement with theoretical estimates and other measurements. Further potential applications of the technique are discussed.
Particle sizing with spectral analysis on the transmission fluctuations

Jianqi Shen,NaiNing Wang,Xiaoshu Cai

2006-01-01

Abstract:Spectral analysis on the transmission fluctuations is a new method for measurements on large particles. Radiated by a narrow beam, the flowing particle system at a uniform velocity causes the transmission signal fluctuate violently. Both the average transmission and the spectrum of transmission fluctuations can be obtained statistically, which include the complete information on particle size distribution and particle concentration (volume fraction). By using the inverse algorithm, the particle size distribution may be extracted from the spectrum of transmission fluctuations and consequently the particle concentration can be achieved from the average transmission. The theoretical expression of the transmission fluctuation spectrum is established, for monolayer of mono-dispersed particles. The theory is then extended to a 3-dimensional system of mono-dispersed particles and further to that of poly-dispersed particles. Experimental test and simulation on dilute particle systems with particle diameters in the range 32～425 μm are performed, which shows that the method is valid to measure the particle size distribution and particle concentration simultaneously.
Photon Ensemble Correlation Spectroscopy Enables Decorrelation-Rate-limited Ultrafast Measurement of Diffusive Particle Dynamics

Pei Li,Shanshan Yang,Zhihua Ding,Peng Li

DOI: https://doi.org/10.1364/ol.42.004525

2017-01-01

Abstract:In contrast to conventional dynamic light scattering (DLS) measurement via a single sampling volume (SV) observation over a long time span, we propose a novel technique named "photon ensemble correlation spectroscopy" for ultrafast characterization of diffusive particle dynamics through decorrelation analysis of complex-valued DLS scattering signals from an ensemble of independent SVs. We confirm that the ensemble analysis provides a decorrelation-rate-limited ultrafast measurement and demonstrates the feasibility of imaging spatially resolved particle dynamics. Moreover, the use of complex-valued signals gives additional superiority in terms of reliability.
Modulated 3D cross-correlation light scattering: improving turbid sample characterization

Ian Block,Frank Scheffold

DOI: https://doi.org/10.1063/1.3518961

2010-11-03

Abstract:Accurate characterization using static light scattering (SLS) and dynamic light scattering (DLS) methods mandates the measurement and analysis of singly-scattered light. In turbid samples, the suppression of multiple scattering is therefore required to obtain meaningful results. One powerful technique for achieving this, known as 3D cross-correlation, uses two simultaneous light scattering experiments performed at the same scattering vector on the same sample volume in order to extract only the single scattering information common to both. Here we present a significant improvement to this method in which the two scattering experiments are temporally separated by modulating the incident laser beams and gating the detector outputs at frequencies exceeding the timescale of the system dynamics. This robust modulation scheme eliminates cross-talk between the two beam- detector pairs and leads to a four-fold improvement in the cross-correlation intercept. We measure the dynamic and angular-dependent scattering intensity of turbid colloidal suspensions and exploit the improved signal quality of the modulated 3D cross-correlation DLS and SLS techniques.

Soft Condensed Matter,Chemical Physics,Optics
Submicron particle sizing by method of segmental autocorrelation dynamic light scattering

Jianwen Yang,Feng Li,WeiJian Tian,Zukang Lu,Zhengkang Bao

1998-01-01

Abstract:The principle of particle sizing by the method of dynamic light scattering is reviewed. By analyzing the relative error, the method of segmental autocorrelation is presented. The problems of high speed and large amount data acquisition are solved. The accuracy of correlation function is not affected seriously. The measuring results are in good agreement with the nominal values.
Simultaneous Measurement of Monocomponent Droplet Temperature/refractive Index, Size and Evaporation Rate with Phase Rainbow Refractometry

Yingchun Wu,Cyril Crua,Haipeng Li,Sawitree Saengkaew,Lutz Maedler,Xuecheng Wu,Gerard Grehan

DOI: https://doi.org/10.1016/j.jqsrt.2018.04.034

2018-01-01

Abstract:The accurate measurements of droplet temperature, size and evaporation rate are of great importance to characterize the heat and mass transfer during evaporation/condensation processes. The nanoscale size change of a micron-sized droplet exactly describes its transient mass transfer, but is difficult to measure because it is smaller than the resolutions of current size measurement techniques. The Phase Rainbow Refractometry (PRR) technique is developed and applied to measure droplet temperature, size and transient size changes and thereafter evaporation rate simultaneously. The measurement principle of PRR is theoretically derived, and it reveals that the phase shift of the time-resolved ripple structures linearly depends on, and can directly yield, nano-scale size changes of droplets. The PRR technique is first verified through the simulation of rainbows of droplets with changing size, and results show that PRR can precisely measure droplet refractive index, absolute size, as well as size change with absolute and relative errors within several nanometers and 0.6%, respectively, and thus PRR permits accurate measurements of transient droplet evaporation rates. The evaporations of flowing single n-heptane droplet and monodispersed n-heptane droplet stream are investigated by two PRR systems with a high speed linear CCD and a low speed array CCD, respectively. Their transient evaporation rates are experimentally determined and quantitatively agree well with the theoretical values predicted by classical Maxwell and Stefan-Fuchs models. With the demonstration of evaporation rate measurement of monocomponent droplet in this work, PRR is an ideal tool for measurements of transient droplet evaporation/condensation processes, and can be extended to multicomponent droplets in a wide range of industrially-relevant applications. (C) 2018 Elsevier Ltd. All rights reserved.
Extraction and Measurement Sensitivity Improvement of Third‐order Autocorrelation Trace from Mixed Autocorrelations

Yizhen Wei,Shiming Gao

DOI: https://doi.org/10.1002/mop.28557

IF: 1.311

2014-01-01

Microwave and Optical Technology Letters

Abstract:ABSTRACTA valuable insight is presented on obtaining high‐sensitivity third‐order autocorrelation trace in the wavelength and power regimes where both two‐ and three‐photon absorption of the detector should be considered. Theoretical analysis and experimental results are provided to discuss the limitations to the measurement sensitivity. By developing a new algorithm of harmonics detection, an approach is also proposed to improve the measurement sensitivity beyond our previous demonstration. © 2014 Wiley Periodicals, Inc. Microwave Opt Technol Lett 56:2234–2237, 2014
Accurate nanoparticle size measurement by combining photometry and tracking analysis

Yiyang Zhang,Chen Wang,Jingan Wang,Cheng Zhang,Weiqiang Zheng,Yue Qiu,Yuting Yang

DOI: https://doi.org/10.35848/1347-4065/ad3008

IF: 1.5

2024-03-28

Japanese Journal of Applied Physics

Abstract:Accurate determination of nanoparticle size is paramount in various fields, including molecular imaging, food safety, drug delivery, and nanobiotechnology. Conventional methods face limitations in accurately resolving different size distributions. Here, we introduce an approach to measure size distribution by combining photometry and tracking analysis of single particles. Our approach is based on a plasmonic dark field imaging system to image and track individual nanoparticles. Scattering intensity, spot size, and diffusion coefficient are quantified and fed into the machine learning model to establish the relationship with particle sizes. Compared with conventional methods, our approach shows improved accuracy in size measurement. To verify the universality of our method, we further demonstrate the sizing capability at diverse and complex conditions, enabling us to discriminate particle size differences within 20 nm in polydisperse systems.

physics, applied
Velocity and size measurement of droplets from an ultrasonic spray coater using Photon Correlation Spectroscopy and Turbidimetry

Pieter Verding,Wim Deferme,Werner Steffen

DOI: https://doi.org/10.1364/AO.402579

2020-08-31

Abstract:We have developed a combination of light scattering techniques to study and characterize droplets of a ultrasonic spray printer or coater in flight. For this economically relevant printer there is so far no reliable technique to systematically adjust the experimental parameters. We have combined photon correlation spectroscopy and turbidimetry to determine size and speed of the droplets depending on parameters of the printing process as viscosity, concentration and speed of the driving shroud gas. Our method allows to predetermine these parameters to control the properties of the printed films as e.g. thickness from tens of nanometers to micrometers.

Materials Science
Particle Size Measurement Using Dynamic Light Scattering at Ultra-Low Concentration Accounting for Particle Number Fluctuations

Mengjie Wang,Jin Shen,John C. Thomas,Tongtong Mu,Wei Liu,Yajing Wang,Jinfeng Pan,Qin Wang,Kaishi Liu

DOI: https://doi.org/10.3390/ma14195683

IF: 3.4

2021-09-29

Materials

Abstract:Dynamic light scattering (DLS) is a popular method of particle size measurement, but at ultra-low particle concentrations, the occurrence of number concentration fluctuations limits the use of the technique. Number fluctuations add a non-Gaussian term to the scattered light intensity autocorrelation function (ACF). This leads to an inaccurate particle size distribution (PSD) being recovered if the normal DLS analysis model is used. We propose two methods for inverting the DLS data and recovering the PSDs when number fluctuations are apparent. One is to directly establish the relationship between the non-Gaussian ACF and the PSD by the kernel function reconstruction (KFR) method while including the non-Gaussian term to recover the PSD. The other is to remove the effect of the non-Gaussian term in the ACF by the baseline reset (BR) method. By including the number fluctuation term, the ideal recovered PSD can be obtained from the simulated data, but this will not happen in the experimental measurement data. This is because the measured intensity ACF contains more noise than the simulated ACF at ultra-low concentration. In particular, the baseline noise at the tail of long delay time of ACF overwhelms the number fluctuation term, making it difficult to recover reliable PSD data. Resetting the baseline can effectively remove the digital fluctuation term in ACF, which is also a feasible method to improve PSD recovery under ultra-low concentration. However, increasing noise at ultra-low concentrations can lead to errors in determining an effective baseline. This greatly reduces the accuracy of inversion results. Results from simulated and measured ACF data show that, for both methods, noise on the ACF limits reliable PSD recovery.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
On-the-fly particle metrology in hollow-core photonic crystal fibre

Abhinav Sharma,Shangran Xie,Richard Zeltner,Philip St.J. Russell

DOI: https://doi.org/10.1364/OE.27.034496

2019-07-21

Abstract:Efficient monitoring of airborne particulate matter (PM), especially particles with aerodynamic diameter less than 2.5 um (PM2.5), is crucial for improving public health. Reliable information on the concentration, size distribution and chemical characteristics of PMs is key to evaluating air pollution and identifying its sources. Standard methods for PM2.5 characterization require sample collection from the atmosphere and post-analysis using sophisticated equipment in a laboratory environment, and are normally very time-consuming. Although optical methods based on analysis of scattering of free-space laser beams or evanescent fields are in principle suitable for real-time particle counting and sizing, lack of knowledge of the refractive index in these methods not only leads to inevitable sizing ambiguity but also prevents identification of the particle material. In the case of evanescent wave detection, the system lifetime is strongly limited by adhesion of particles to the surfaces. Here we report a novel technique for airborne particle metrology based on hollow-core photonic crystal fibre. It offers in situ particle counting, sizing and refractive index measurement with effectively unlimited device lifetime, and relies on optical forces that automatically capture airborne particles in front of the hollow core and propel them into the fibre. The resulting transmission drop, together with the time-of-flight of the particles passing through the fibre, provide unambiguous mapping of particle size and refractive index with high accuracy. The technique represents a considerable advance over currently available real-time particle metrology systems, and can be directly applied to monitoring air pollution in the open atmosphere as well as precise particle characterization in a local environment such as a closed room or a reaction vessel.

Applied Physics,Optics
Optical signal-based improvement of individual nanoparticle tracking analysis

Minh-Chau Nguyen,Pierre Bon

2023-08-18

Abstract:Nanoparticle Tracking Analysis (NTA) provides a simple method to determine individual nanoparticle size. However, because size quantification is based on the slowly converging statistical law of random event, its intrinsic error is large, especially in case of limited event number, e.g. for weak scattering nanoparticles. Here, we introduce an NTA improvement by analyzing each individual NP trajectory while taking into account the other trajectories with a weighting coefficient. This weighting coefficient is directly derived from the optical signature of each particle measured by quantitative phase microscopy. The simulations and experimental results demonstrate the improvement of NTA accuracy, not only for mono-disperse but also for poly-disperse particle solutions.

Signal Processing
Improved Dynamic Light Scattering using an adaptive and statistically driven time resolved treatment of correlation data

Alexander V. Malm,Jason C. W. Corbett

DOI: https://doi.org/10.1038/s41598-019-50077-4

IF: 4.6

2019-09-18

Scientific Reports

Abstract:Abstract Dynamic Light Scattering (DLS) is a ubiquitous and non-invasive measurement for the characterization of nano- and micro-scale particles in dispersion. The sixth power relationship between scattered intensity and particle radius is simultaneously a primary advantage whilst rendering the technique sensitive to unwanted size fractions from unclean lab-ware, dust and aggregated & dynamically aggregating sample, for example. This can make sample preparation iterative, challenging and time consuming and often requires the use of data filtering methods that leave an inaccurate estimate of the steady state size fraction and may provide no knowledge to the user of the presence of the transient fractions. A revolutionary new approach to DLS measurement and data analysis is presented whereby the statistical variance of a series of individually analysed, extremely short sub-measurements is used to classify data as steady-state or transient. Crucially, all sub-measurements are reported, and no data are rejected, providing a precise and accurate measurement of both the steady state and transient size fractions. We demonstrate that this approach deals intrinsically and seamlessly with the transition from a stable dispersion to the partially- and fully-aggregated cases and results in an attendant improvement in DLS precision due to the shorter sub measurement length and the classification process used.

multidisciplinary sciences
Inverse Scattering Spectroscopic Method for the Fast Measurement of the Number and Mass Concentrations of Metal Nanoparticle Colloid

Guoce Yang,Benfeng Bai,Wenqi Liu,Xiaochun Wu

DOI: https://doi.org/10.1117/12.2227493

2016-01-01

Abstract:Metal nanoparticles (NPs) have wide applications in various fields due to their unique properties. The accurate and fast characterization of metal NP concentration is highly demanded in the synthesis, metrology, and applications of NPs. The commonly used inductively coupled plasma mass spectrometry (ICP-MS) is a standard method for measuring the mass concentration (MC) of NPs, even though it is time-consuming, expensive, and destructive. While for the number concentration (NC) characterization of NPs, the method is less explored. Here, we present an improved optical extinction-scattering spectroscopic method for the fast, non-destructive characterization of the MC and NC of poly-disperse metal NP colloid simultaneously. By measuring the extinction spectrum and the 90° scattering spectrum of the nanorod (NR) colloid, we can solve an inverse scattering problem to retrieve the two dimensional joint probability density function (2D-JPDF) with respect to the width and the aspect ratio of NR sample accurately, based on which the NC and MC of the colloidal NPs can be calculated. This method is powerful to characterize both the geometric parameters and the concentrations, including the MC and NC, of poly-disperse metal NPs simultaneously. It is very useful for the non-destructive, non-contact, and in-situ comprehensive measurement of colloidal NPs. This method also has the potential to characterize NPs of other shapes or made of other materials.
Nanoparticle size determination using optical microscopes

Ravikiran Attota,Premsagar Purushotham Kavuri,Hyeonggon Kang,Richard Kasica,Lei Chen

DOI: https://doi.org/10.1063/1.4900484

IF: 4

2014-10-20

Applied Physics Letters

Abstract:We present a simple method for size determination of nanoparticles using conventional optical microscopes. The method, called through-focus scanning optical microscopy, makes use of the four-dimensional optical information collected at different focus positions. Low partial coherence illumination combined with analysis of through-focus optical content enables nanoparticle size determination with nanometer scale sensitivity. We experimentally demonstrate this using fabricated Si nanodots and spherical gold nanoparticles. The method is economical, as no hardware modifications to conventional optical microscopes are needed. In addition, the method also has high throughput and potential for soft nanoparticle size determination without distortion.

physics, applied
Nano and Submicron Particle Sizing in Concentrated Suspension by Dynamic Ultrasound Scattering Method

Kana Kitao,Misaki Tani,Manami Yamane,Shinichiro Inui,Mao Yamada,Tomohisa Norisuye

DOI: https://doi.org/10.1016/j.colsurfa.2024.133807

IF: 5.518

2024-03-26

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:The ultrasonic spectroscopy method has long been known as a particle size analysis method applicable to concentrated particle suspensions that do not transmit light. On the other hand, it requires prior estimation of density and thermal parameters in addition to the parameters of the surrounding liquid. In this paper, we describe a method for precisely measuring diameter of nano and submicron particles in highly concentrated (~30 wt%), optically turbid suspensions using dynamic ultrasound scattering (DSS). This method is an acoustic analogue of the dynamic light scattering (DLS) method, which determines the so-called Stokes-Einstein particle size by measuring the diffusion coefficient. Here, the only parameters required in the DSS analysis are the simultaneously measurable sound velocity of the suspension and the viscosity of the solvent (water), which is significantly less a priori information required. In addition, the required sample volume is only 50 μL, which can easily accommodate precious samples. However, as the concentration increases, two effects cannot be ignored: interference from the particle structure (static structure factor) and long-ranged interaction (hydrodynamic interaction). This study focuses on the long-wavelength approximation of ultrasound, which has a longer wavelength than light, and the advantages of simplifying these complex interactions and providing a means to determine particle size by a different route than conventional ultrasonic methods. Finally, the advantages and disadvantages of this method are also discussed.

chemistry, physical
Calculation of the Budget of Uncertainty on Measurements Size Nanoparticles Using Dynamic Light Scattering

Adriana Geraldes,Wilmmer Rosero,Maria Elisa Rostelato,Jorge Sarkis

DOI: https://doi.org/10.21577/0103-5053.20240039

2024-01-01

Journal of the Brazilian Chemical Society

Abstract:Accurate nanoparticle characterization is essential since it can significantly affect its physicochemical and biological properties. Among physicochemical properties used to characterize nanomaterials, size and size distribution are essential and should be assessed before surveying poisonousness or biocompatibility. Several methods are suitable to evaluate these characteristics including the dynamic light scattering. The aims of the present paper were to propose a methodology to measure nanoparticle size and present the estimation of the particle size uncertainty using the dynamic light scattering technique. The reliability of measurements was ensured by a series of handling precautions and quality criteria for good measurements to be applied for methodology validation using reference material polyvinylpyrrolidone coated silver nanoparticles. The identification and quantification of input quantities to the measurement uncertainties were estimated. The uncertainty concerning the equipment was 1.2% while the repeatability obtained was 1.4%, within the range of values stipulated in the reference standard (less than 5%). The relative standard uncertainties of trueness and repeatability were below the thresholds defined by the International Organization for Standardization. The result of the expanded uncertainty was 3.9% with 95% coverage probability for the reference material.

chemistry, multidisciplinary
Sizing Submicron Particles from Optical Scattering Data Collected with Oblique Incidence Illumination.

Ran Liao,Paul L. D. Roberts,Jules S. Jaffe

DOI: https://doi.org/10.1364/ao.55.009440

IF: 1.9

2016-01-01

Applied Optics

Abstract:As submicron particles play an important role in a variety of ecosystems that include aqueous, terrestrial, and atmospheric, a measurement system to quantify them is highly desirable. In pursuit of formulating and fabricating a system to size them using visible light, a system that collects multi-directional scattered light from individual particles is proposed. A prototype of the system was simulated, built, and tested via calibration with a set of polystyrene spheres in water with known sizes. Results indicate that the system can accurately resolve the size of these particles in the 0.1 to 0.8 μm range. The system incorporates a design that uses oblique illumination to collect scattered light over a large range of both forward and backward scatter angles. This is then followed by the calculation of a ratio of forward to backscattered light, integrated over a suitably defined range. The monotonic dependence of this ratio upon particle size leads to an accurate estimate of particle size. The method was explored first, using simulations, and followed with a working version. The sensitivity of the method to a range of relative refractive index was tested using simulations. The results indicate that the technique is relatively insensitive to this parameter and thus of potential use in the analysis of particles from a variety of ecosystems. The paper concludes with a discussion of a variety of pragmatic issues, including the required dynamic range as well as further research needed with environmentally relevant specimens to create a pragmatic instrument.

Effect of spermine and N1-dansyl-spermine on epileptiform activity in mouse cortical slices.

Photon-Weight-Reallocated Stimulated Emission Depletion Nanoscopy

Simulation of Dynamic Light Scattering Signal Based on AR Model

X-Ray Fluorescence Correlation Spectroscopy: A Method for Studying Particle Dynamics in Condensed Matter

Particle sizing with spectral analysis on the transmission fluctuations

Photon Ensemble Correlation Spectroscopy Enables Decorrelation-Rate-limited Ultrafast Measurement of Diffusive Particle Dynamics

Modulated 3D cross-correlation light scattering: improving turbid sample characterization

Submicron particle sizing by method of segmental autocorrelation dynamic light scattering

Simultaneous Measurement of Monocomponent Droplet Temperature/refractive Index, Size and Evaporation Rate with Phase Rainbow Refractometry

Extraction and Measurement Sensitivity Improvement of Third‐order Autocorrelation Trace from Mixed Autocorrelations

Accurate nanoparticle size measurement by combining photometry and tracking analysis

Velocity and size measurement of droplets from an ultrasonic spray coater using Photon Correlation Spectroscopy and Turbidimetry

Particle Size Measurement Using Dynamic Light Scattering at Ultra-Low Concentration Accounting for Particle Number Fluctuations

On-the-fly particle metrology in hollow-core photonic crystal fibre

Optical signal-based improvement of individual nanoparticle tracking analysis

Improved Dynamic Light Scattering using an adaptive and statistically driven time resolved treatment of correlation data

Inverse Scattering Spectroscopic Method for the Fast Measurement of the Number and Mass Concentrations of Metal Nanoparticle Colloid

Nanoparticle size determination using optical microscopes

Nano and Submicron Particle Sizing in Concentrated Suspension by Dynamic Ultrasound Scattering Method

Calculation of the Budget of Uncertainty on Measurements Size Nanoparticles Using Dynamic Light Scattering

Sizing Submicron Particles from Optical Scattering Data Collected with Oblique Incidence Illumination.