Assessment of RANS-based turbulence models for isothermal confined swirling flow in a realistic can-type gas turbine combustor application
Aishvarya Kumar,Ram Prakash Bharti
DOI: https://doi.org/10.1016/j.jocs.2024.102362
IF: 3.817
2024-06-14
Journal of Computational Science
Abstract:The present study assesses RANS-based turbulence models to simulate the isothermal confined swirling flow in a combustor representing a constituent can combustor of the can-annular configuration used in jet engines. The two-equation models (standard k−ε , realizable k−ε , standard k−ω , SST k−ω ), and seven-equation model (linear pressure strain - Reynolds stress model, LPS-RSM), are assessed by comparing their predictions of mean axial velocity, mean transverse velocity, turbulent kinetic energy, and shear stress with the experimental data at two different positions (i.e., the primary and dilution hole planes) in the combustor. While the two-equation models generally have failed to predict the confined swirling flow at both positions accurately, the SST k−ω model yielded the most accurate, followed by standard k−ω and realizable k−ε models. The discrepancies between the computational and experimental results could be attributed to the isotropic turbulence assumptions, which, however, are invalid for confined swirling flows. Further, the two-equation model formulations cannot capture the intricacies of vortex flow and its interaction with the surroundings in confined swirling flows. The LPS-RSM, which considers turbulence anisotropy, showed some promise, although overpredicted results follow the trend with experimental values at the primary holes plane. However, at the dilution holes plane, the model overpredicted the velocity field, and underestimated the turbulence field, including turbulent kinetic energy and shear stress. These observed discrepancies can be ascribed to the pressure-strain correlation in the LPS-RSM, which assumes the pressure is a linear function of the strain-rate tensor. However, this linear assumption is quite simplistic for complex flows. Further, the influence of discretization (SOU and third-order MUSCL) schemes of convective terms is also assessed, and the differences in predictions resulted from MUSCL scheme having lower diffusion and superior ability to capture sharper gradients, however, did not translate into improving the solution accuracy. Hence, this study suggests that more advanced high-fidelity turbulence models (e.g., hybrid RANS-LES, LES, DNS) are needed to accurately predict the confined swirling flow in combustors.
computer science, theory & methods, interdisciplinary applications