Abstract:Recent numerical simulations indicate that streamwise-preferential anisotropic porous materials have the potential to reduce skin friction in turbulent flows through a similar mechanism to riblets. This paper reports particle image velocimetry (PIV) measurements made in turbulent boundary layers at $Re_\tau \approx 360$ over 3D-printed porous substrates exhibiting such streamwise-preferential permeability. The porous material has normalized streamwise permeability $\sqrt{K_{xx}^+}\approx 3.0$ and wall-normal and spanwise permeabilities $\sqrt{K_{yy}^+} = \sqrt{K_{zz}^+} \approx 1.1$. This material is flush-mounted into a cutout in the downstream half of a flat-plate boundary layer setup in a water channel facility. Measurements made at several locations along the porous substrate provide insight into boundary layer development. For fully-developed conditions, the mean profiles show the presence of a logarithmic region over the porous material with similar constants to those found over a smooth wall. A technique that estimates the mean profile at single-pixel resolution from the particle images suggests the presence of an interfacial slip velocity of $U_s^+ \approx \sqrt{K_{xx}^+}$ over the porous substrate. Friction velocity estimates obtained from outer layer fits to the mean profile suggest a marginal increase in drag over the porous substrate. PIV measurements show a decrease in the intensity of streamwise velocity fluctuations in the near-wall region and an increase in the intensity of wall-normal velocity fluctuations. These observations are consistent with simulation results, which suggest that materials with $\sqrt{K_{yy}^+} > 0.4$ are susceptible to the emergence of spanwise rollers similar to Kelvin-Helmholtz vortices that degrade drag reduction performance. Velocity spectra indicate that such structures emerge in the experiments as well.

An investigation of information flux between turbulent boundary layer and porous medium

Transport of Turbulence Across Permeable Interface in a Turbulent Channel Flow: Interface-Resolved Direct Numerical Simulation

An assessment of turbulence transportation near regular and random permeable interfaces

Direct Numerical Simulation of Compressible Turbulent Channel Flows over Porous Boundaries

On the boundary layer structure near a highly permeable porous interface

Lagrangian Dynamics and Heat Transfer in Porous-Media Convection

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

Turbulent Structures and Heat Transfer Across the Air-liquid Interface in the Wind-driven Turbulent Flow

Flow turbulence topology in regular porous media: From macroscopic to microscopic scale with direct numerical simulation

Turbulent Boundary Layer over Porous Media with Wall-Normal Permeability

Direct Numerical Simulation of Convective Heat Transfer in Porous Media

Boundary Conditions at the Interface Between Fluid Layer and Fibrous Medium

Microscopic velocity field measurements inside a regular porous medium adjacent to a low Reynolds number channel flow

Numerical Simulation of Turbulent Flow and Heat Transfer in a Three-Dimensional Channel Coupled with Flow Through Porous Structures

Turbulent boundary layers over streamwise-preferential porous materials

Investigation of Inertial Effect in Simplified Porous Media Flow

Fluid Flow and Conjugate Heat Transfer in a Channel with Inflow from a Porous Wall

Small scale aspects of flows in proximity of the turbulent/non-turbulent interface

Brinkman Double-Layer Model for Flow at a Free-Porous Interface

INFLUENCE OF VARIABLE PERMEABILITY ON FREE CONVECTION FLOW ALONG A CONVECTIVELY HEATED VERTICAL SURFACE IN A SATURATED POROUS MEDIUM

Numerical Simulation of Heat and Momentum Transport at the Coupled Interface Between a Rectangular Channel and Porous Media