Abstract:Monte Carlo (MC) simulation is commonly considered as the most accurate method for radiation dose calculations. Commissioning of a beam model in the MC code against a clinical linear accelerator beam is of crucial importance for its clinical implementation. In this paper, we propose an automatic commissioning method for our GPU-based MC dose engine, gDPM. gDPM utilizes a beam model based on a concept of phase-space-let (PSL). A PSL contains a group of particles that are of the same type and close in space and energy. A set of generic PSLs was generated by splitting a reference phase-space file. Each PSL was associated with a weighting factor, and in dose calculations the particle carried a weight corresponding to the PSL where it was from. Dose for each PSL in water was pre-computed, and hence the dose in water for a whole beam under a given set of PSL weighting factors was the weighted sum of the PSL doses. At the commissioning stage, an optimization problem was solved to adjust the PSL weights in order to minimize the difference between the calculated dose and measured one. Symmetry and smoothness regularizations were utilized to uniquely determine the solution. An augmented Lagrangian method was employed to solve the optimization problem. To validate our method, a phase-space file of a Varian TrueBeam 6 MV beam was used to generate the PSLs for 6 MV beams. In a simulation study, we commissioned a Siemens 6 MV beam on which a set of field-dependent phase-space files was available. The dose data of this desired beam for different open fields and a small off-axis open field were obtained by calculating doses using these phase-space files. The 3D γ-index test passing rate within the regions with dose above 10% of dmax dose for those open fields tested was improved averagely from 70.56 to 99.36% for 2%/2 mm criteria and from 32.22 to 89.65% for 1%/1 mm criteria. We also tested our commissioning method on a six-field head-and-neck cancer IMRT plan. The passing rate of the γ-index test within the 10% isodose line of the prescription dose was improved from 92.73 to 99.70% and from 82.16 to 96.73% for 2%/2 mm and 1%/1 mm criteria, respectively. Real clinical data measured from Varian, Siemens, and Elekta linear accelerators were also used to validate our commissioning method and a similar level of accuracy was achieved.

MIDSX: A Monte Carlo Interaction and Dosimetry Simulation of X-rays

Current status and new horizons in Monte Carlo simulation of X-ray CT scanners

Dosimetric validation of SmART-RAD Monte Carlo modelling for x-ray cabinet radiobiology irradiators

Development of a Monte Carlo Beam Model for Raster Scanning Proton Beams and Dosimetric Comparison

Monte Carlo simulation of whole body dose distribution in patients with total body X (γ) ray irradiation

Implementation of a new EGSnrc particle source class for computed tomography: validation and uncertainty quantification

Dose Calculation of X-Ray in Medium

SU‐E‐T‐58: A Novel Monte Carlo Photon Transport Simulation Scheme and Its Application in Cone Beam CT Projection Simulation

Assessment of Uncertainties Associated with Monte Carlo-based Personalized Dosimetry in Clinical CT Examinations

A project to design a software package for reporting multidetector CT (MDCT) doses

MCNP simulations of medical diagnostic X-ray spectra

Comprehensive procedure for personalized dosimetry in computed tomography

A general-purpose Monte Carlo particle transport code based on inverse transform sampling for radiotherapy dose calculation

WE-EF-207-05: Monte Carlo Dosimetry for a Dedicated Cone-Beam CT Head Scanner

Simulation, Visualization and Dosimetric Validation of Scatter Radiation Distribution under Fluoroscopy Settings

Monte Carlo Simulation Study of Dosimetric Parameters of Varian HDR 192 Ir Source

Automatic Commissioning of a GPU-based Monte Carlo Radiation Dose Calculation Code for Photon Radiotherapy

Metropolis Monte Carlo Simulation Scheme for Fast Scattered X-ray Photon Calculation in CT

Effects of Tissue Material Properties on X-Ray Image, Scatter and Patient Dose Determined using Monte Carlo Simulations

TOPAS-MC Extension for Nuclear Medicine Applications

Comprehensive Evaluations of Cone-beam CT dose in Image-guided Radiation Therapy via GPU-based Monte Carlo simulations