Magnetic Field Measurement With Improved Scale Factor Based on a Dual-Loop Optoelectronic Oscillator With Vernier Effect Using a Cascaded GMM-FBG and Monel-400-FBG
Beilei Wu,Xiaotong Zhao,Shiying Xiao,Muguang Wang,Bin Yin,Pufeng Gao,Zixiao Wang,Fengping Yan
DOI: https://doi.org/10.1109/tim.2024.3381259
IF: 5.6
2024-04-27
IEEE Transactions on Instrumentation and Measurement
Abstract:A magnetic field measurement with enhanced sensitivity based on the Vernier effect of a dual-loop optoelectronic oscillator (OEO) using a cascaded giant magnetostrictive material-fiber Bragg grating (GMM-FBG) and Monel-400-fiber Bragg grating (Monel-400-FBG) is proposed and experimentally demonstrated. The OEO loop incorporates two reflected signals from the dual FBGs, serving as separate light sources injected into two paths with distinct fiber lengths. The dispersion introduced in the loop allows the wavelength shift of the GMM-FBG to be translated into a frequency shift of the microwave signal within the OEO cavity. As the GMM-FBG's central wavelength shifts with the magnetic field variation, the change of the monitoring OEO frequency enables precise measurement of magnetic field information. Diverging from conventional single-loop configurations, the proposed OEO generates the Vernier effect due to the length disparity between the two loops. Consequently, by monitoring the frequency variations in the envelope of the OEO's micro-wave signal, the sensitivity scale factor for sensing information is significantly enhanced. Experimental findings reveal a magnetic field sensitivity of approximately 201 Hz/mT for the single loop, increasing to 8 kHz/mT with the application of the Vernier effect, which represents a 40-fold improvement. Furthermore, a Monel-400 alloy hosts the reference FBG, possessing a similar thermal expansion coefficient to GMM. This design mitigates temperature crosstalk in magnetic field measurements. Compared to utilizing an unprocessed reference FBG, the magnetic field error induced by temperature is reduced from 2.46 to 0.06 mT. Additionally, flexible sensitivity scale factors can be achieved by designing the varied path length differences. Experimental results demonstrate magnetic field sensitivities of 12.7 and 21.9 kHz/mT, with increases of 64 and 109 times, respectively.
engineering, electrical & electronic,instruments & instrumentation