Abstract:The assimilation and the penetration of injected materials play significant roles in the mitigation efficiency of shattered pellet injection (SPI) as a disruption mitigation system (DMS), hence an accurate description of the fragment ablation rate is desirable. Current mainstream 3D MHD codes modelling SPIs mostly assume instantaneous thermalization between the previously hot ambient electrons and the newly released cold electrons. This could result in underestimation of the ablation rate if the hot electron thermalization time is comparable or even longer than the fragment flying time across flux tubes, putting the validity of these 3D SPI simulations into question. To resolve this doubt, we hereby investigate the thermalization dynamics and the overall hot-electron impact. The finite-time collisional thermalization of hot-tail electrons in a rapidly cooling plasma, as well as the so-called 'self-limiting' effect are considered. The former effect tends to deplete the colder population within a hot-tail species, while the latter is found to preferentially deplete the higher energy population. The combined result is found to cause an almost self-similar decay of the hot electron distribution function, while its shape does not deviate much from that of Maxwellian distribution and the mean energy does not change much during the thermalization process. Based on this observation, axisymmetric JOREK D2 SPI simulations were carried out with additional hot-tail contribution to evaluate their overall impact onto the injection assimilation and penetration. It is found that the hot-tail effect indeed causes enhanced assimilation and shallower penetration, although the overall effect depends on the exact injection configuration, with the slow injection showing negligible hot-tail effect while the fast single non-shattered pellet case shows drastic hot-tail ablation enhancement. For ITER-like SPI parameters, there is no significant deviation in the total assimilation, but some deviation in the injection penetration is observed for the fast injection velocity cases.

ITER-IA 3D MHD Simulations of Shattered Pellet Injection(SPI) -- D1.3 Code Validation (DIII-D)

ITER-IA 3D MHD Simulations of Shattered Pellet Injection(SPI)- D1.1 Optimization of the SPI model

Transport simulations of pre-thermal quench shattered pellet injection in ITER: code verification and assessment of key trends

Simserver Simulation of a Model-Based Current Profile Controller in the DIII-D Plasma Control System

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

M3D-K Simulations of Sawteeth and Energetic Particle Transport in Tokamak Plasmas

Toward a First-Principles Integrated Simulation of Tokamak Edge Plasmas

Dispersive shell pellet injection modeling and validation for DIII-D disruption mitigation

Nonlinear Hybrid Simulation of Internal Kink with Beam Ion Effects in DIII-D

Simulation of DIII-D disruption with argon pellet injection and runaway electron beam

Thermal modeling of the multiple shattered pellet injection system for HL-3

Hot-tail Electrons' Impact on Assimilation and Injection Penetration of D2 Shattered Pellet Injections

Modelling of shattered pellet injection experiments on the ASDEX Upgrade tokamak

Non-linear shattered pellet injection modelling in ASDEX Upgrade

3D radiated power analysis of JET SPI discharges using the Emis3D forward modeling tool

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Validation of NSFsim as a Grad-Shafranov Equilibrium Solver at DIII-D

Modifications to the JET Shattered Pellet Injector to Optimize Disruption Mitigation Experiments for Supporting ITER’s DMS Design

Radiation asymmetry and MHD destabilization during the thermal quench after impurity Shattered Pellet Injection

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges