Abstract:This paper presents the design, analysis, and testing of a parallel-kinematic high-bandwidth XY nanopositioning stage driven by piezoelectric stack actuators. The stage is designed with two kinematic chains. In each kinematic chain, the end-effector of the stage is connected to the base by two symmetrically distributed flexure modules, respectively. Each flexure module comprises a fixed-fixed beam and a parallelogram flexure serving as two orthogonal prismatic joints. With the purpose to achieve high resonance frequencies of the stage, a novel center-thickened beam which has large stiffness is proposed to act as the fixed-fixed beam. The center-thickened beam also contributes to reducing cross-coupling and restricting parasitic motion. To decouple the motion in two axes totally, a symmetric configuration is adopted for the parallelogram flexures. Based on the analytical models established in static and dynamic analysis, the dimensions of the stage are optimized in order to maximize the first resonance frequency. Then finite element analysis is utilized to validate the design and a prototype of the stage is fabricated for performance tests. According to the results of static and dynamic tests, the resonance frequencies of the developed stage are over 13.6 kHz and the workspace is 11.2 μm × 11.6 μm with the cross-coupling between two axes less than 0.52%. It is clearly demonstrated that the developed stage has high resonance frequencies, a relatively large travel range, and nearly decoupled performance between two axes. For high-speed tracking performance tests, an inversion-based feedforward controller is implemented for the stage to compensate for the positioning errors caused by mechanical vibration. The experimental results show that good tracking performance at high speed is achieved, which validates the effectiveness of the developed stage.

FleXstage: Lightweight Magnetically Levitated Precision Stage with Over-Actuation towards High-Throughput IC Manufacturing

Transcending the Acceleration-Bandwidth Trade-off: Lightweight Precision Stages with Active Control of Flexible Dynamics

Sequential Structure and Control Co-design of Lightweight Precision Stages with Active control of flexible modes

A piezodriven three dimensional micropositioning stage for nano-manufacturing

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

Design, Control of an Aerostatic X-Y Planar Motion Stage for Precision Positioning

Control Co-design of Actively Controlled Lightweight Structures for High-acceleration Precision Motion Systems

LevCube: A six-degree-of-freedom magnetically levitated nanopositioning stage with centimeter-range XYZ motion

A New Magnetically Levitated Positioning Stage with Nanometer Resolution

Design, Analysis and Testing of A Parallel-Kinematic High-Bandwidth Xy Nanopositioning Stage

Design of A Long Stroke Nanopositioning Stage with Self-damping Actuator and Flexure Guide

A Novel Framework of Lightweight Optimization Design of a Prototype Wafer Stage With Control Verification

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

Design of a compact long-stroke high-precision rigid-flexible coupling motion stage driven by linear motor

Design, optimization, and characterization of an XY nanopositioning stage with multi-level spatial flexure hinges for high-precision large-stroke motion guidance

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

Design and analysis of a 2-degree-of-freedom flexure-based micro-motion stage

Design and Analysis of a New Flexure-Based XY Stage

A Novel Flexure-Based Vertical Nanopositioning Stage with Large Travel Range.

Design and Analysis of a High-Speed XYZ Nanopositioning Stage

Two-Dimensional High Precision Positioning Maglev Stage