Abstract:Conductors made of high-temperature (HTS) wires helically wound in one or more layers on round tubes (CORT) are compact, flexible, and can carry a large amount of current. Although these conductors were initially developed for DC applications, e.g. in magnets, it is worth considering their use for AC, e.g. in underground cables for medium voltage grids and with currents in the kA-range. In these cases, the major challenge is reducing AC losses. In contrast to a straight superconducting wire, in a helical arrangement, due to superconducting shielding, the current does not follow the direction of the wires, but takes a non-trivial zig-zag path within the individual HTS wires (Garber pattern). This includes current components across the thickness of the superconducting layers, so that the often used thin-shell approximation does not hold. In this contribution, we studied a one-layer three-wire CORT by means of fully three-dimensional simulations, based on the H-formulation of Maxwell's equations implemented in the commercial software package COMSOL Multiphysics. As a result of our simulations, the peculiar current profiles were confirmed. In addition, the influence of current, pitch angle, and frequency on the AC losses was studied. We found an optimum for the pitch angle and that the current profiles strongly depend on frequency.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the AC loss problem in spirally - arranged high - temperature superconducting cables (such as CORT - type cables) due to the special current distribution pattern (i.e., Garber current pattern). Specifically, the paper focuses on the following aspects: 1. **Confirmation of the Garber current pattern**: The paper verifies through full three - dimensional simulation that there exists a special current distribution pattern in the spiral high - temperature superconducting cable, namely the Garber current pattern. This pattern is manifested as the current flowing in a zig - zag path inside the wire, including a radial current component perpendicular to the wire surface. 2. **Influencing factors of AC loss**: The influence of different parameters (such as current, pitch angle and frequency) on AC loss has been studied. In particular, it has been found that there is an optimal value for the pitch angle, which minimizes the AC loss, and the current distribution strongly depends on the frequency. 3. **Improvement of the numerical simulation method**: A method of using a full three - dimensional numerical model to analyze the Garber current pattern and its influence on AC loss has been proposed, which is an improvement over the existing simplified models, because the existing simplified models cannot accurately capture such three - dimensional effects. 4. **Comparison between theory and experiment**: The paper also explores the differences between the theoretical model and the experimental results, especially under low - frequency conditions. Due to the influence of the relaxation effect, there may be a certain deviation between the theoretical model and the experimental results. In summary, this paper aims to deeply understand the Garber current pattern in spiral high - temperature superconducting cables and its influence on AC loss through detailed numerical simulation and theoretical analysis, and to provide a scientific basis for optimizing the design and application of such cables.

The Garber Current Pattern: An Additional Contribution to AC Losses in Helical HTS Cables?

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

Analysis of AC Transport Loss in Conductor on Round Core Cables

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

AC losses in HTS sector shaped high-current conductors for fusion coils

Simulation of Current Profile and AC Loss of HTS Winding Wound by Parallel-Connected Tapes

Study on the Current Distribution and Structural Optimization of a High-Temperature Superconducting AC Power Cable

Estimation of Self-Field Critical Current and Transport-Magnetization AC Losses of Roebel Cables

Flux-transfer losses in helically wound superconducting power cables

Numerical modelling of MgB2 conductors for high power AC transmission

Computation of Losses in HTS Under the Action of Varying Magnetic Fields and Currents

Electromagnetic Assessment and AC Losses of Triaxial Cables with Multiple 2G-HTS Layers Per Phase

J model for studying AC magnetization loss in 3D cable structures

AC Loss Estimation of HTS Armature Windings for Electric Machines

A Simplified Model of the Field Dependence for HTS Conductor on Round Core (CORC) Cables

Conceptual Design and Optimisation of HTS Roebel Tapes

Ac Loss Characteristics of Hts Wires Carrying Currents with Different Waveforms

Roebel cables from REBCO coated conductors: a one-century-old concept for the superconductivity of the future

Simulation of Rutherford Cable AC Loss and Magnetization with the Coupled Axial and Transverse Currents Method

Numerical Modeling of AC Loss in HTS Coated Conductors and Roebel Cable Using T-A Formulation and Comparison With H Formulation