Abstract:As renewable generation becomes more prevalent, traditional power systems dominated by synchronous generators are transitioning to systems dominated by converter-interfaced generation. These devices, with their weaker damping capabilities and lower inertia, compromise the system's ability to withstand disturbances, pose a threat to system stability, and lead to oscillations and poor frequency response performance. While some new converter-interfaced generations are capable of providing superior damping and fast frequency control, there is a lack of effective measures to incentivize manufacturers to adopt them. To address this gap, this paper defines the joint oscillation damping and inertia provision services at the system level, seeking to encourage converter-interfaced generation to provide enhanced damping and fast frequency response capabilities. Our approach is anchored in a novel convex parametric formulation that combines oscillation mode and frequency stability constraints. These constraints ensure a sufficient damping ratio for all oscillation modes and maintain transient frequency trajectories within acceptable limits. They are designed to integrate smoothly into various operational and planning optimization frameworks. Using this formulation, we introduce a joint service for oscillation damping and inertia provision based on a cost-minimization problem. This facilitates the optimal allocation of damping and virtual inertia to converters, achieving both small-signal stability and frequency stability. Furthermore, we investigate the economic effects of introducing this service into a new ancillary service market, assessing its impact on system operations and cost-efficiency. Numerical tests highlight the service's efficacy in ensuring both small-signal stability and frequency stability, and offer insights into potential economic benefits.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is that in the power system, as the proportion of renewable energy generation (connected to the grid through power - electronic converters) increases, the inertia and damping capabilities of the system are weakened, resulting in a decline in the system's ability to resist disturbances, thus threatening the system's stability and causing oscillations and poor frequency - response performance. Specifically, the paper aims to encourage converter - interfaced power - generation equipment to provide enhanced damping and fast - frequency - response capabilities by defining a joint oscillation - damping and inertia - supply service to make up for this deficiency. This service is based on a new convex - parameterized model that combines the constraints of oscillation modes and frequency stability, ensuring that all oscillation modes have sufficient damping ratios and keeping the transient - frequency trajectories within an acceptable range. These constraints are designed to be smoothly integrated into various operation and planning optimization frameworks. The joint service is introduced through a cost - minimization problem to achieve the optimal allocation of damping and virtual inertia while ensuring small - signal stability and frequency stability. In addition, the paper also explores the impact of introducing this service into the new ancillary - service market on system operation and cost - efficiency. The main contributions of the paper include: - Formulating convex constraints to enforce satisfactory oscillation - damping and fast - frequency - response performance. - Developing a joint oscillation - damping and inertia - supply service based on a convex - cost - minimization framework to allocate damping and virtual inertia in the network. - Investigating the effect of integrating the joint oscillation - damping and inertia - supply service into the ancillary - service market. Numerical results demonstrate the effectiveness of the proposed service in ensuring system stability and improving cost - effectiveness.

Joint Oscillation Damping and Inertia Provision Service for Converter-Interfaced Generation

Damping Inter-Area Oscillations Using Virtual Generator Based Power System Stabilizer

Damping Low-Frequency Oscillations Through VSC-HVdc Stations Operated As Virtual Synchronous Machines

Rotor Inertia Adaptive Control and Inertia Matching Strategy Based on Parallel Virtual Synchronous Generators System

Adaptive Inertia VSG Control Method Involving Power and Power Change Rate

Optimal Allocation of Energy Storages: A Perspective of System Inertia Support

Oscillation Suppression Strategy of Three-Phase Four-Wire Grid-Connected Inverter in Weak Power Grid

Coordination of Virtual Inertia Control and Frequency Damping in PV Systems for Optimal Frequency Support

Low Frequency Damping Control for Power Electronics-Based AC Grid Using Inverters with Built-In PSS

Grid Inertia and Damping Support Enabled by Proposed Virtual Inductance Control for Grid-Forming Virtual Synchronous Generator

Coordinated Optimization of Parameters of PSS and UPFC-PODCs to Improve Small-Signal Stability of a Power System with Renewable Energy Generation

Optimal Design of Virtual Inertia and Damping Coefficients for Virtual Synchronous Machines

Pricing balancing ancillary services for low-inertia power systems under uncertainty and nonconvexity

Convex-hull Pricing of Ancillary Services for Power System Frequency Regulation with Renewables and Carbon-Capture-Utilization-and-Storage Systems

Emulated Inertia and Damping of Converter-Interfaced Power Source

Frequency Compensation of VSC-HVDC combined with Inertia Simulation: a Passivity-Based Control Approach

Optimal Dynamic Ancillary Services Provision Based on Local Power Grid Perception

Advanced Damping Control Using Wide-Area Measurement Incorporating Communication Delay and Renewable Energy Sources

Improved VSG strategy of grid-forming inverters for supporting inertia and damping

Interaction Between Grid-Forming Converters with AC Grids and Damping Improvement Based on Loop Shaping

Deployment of a full‐size converter utilised hydropower plant to enhance inter‐area oscillation damping