Abstract:A broad consensus of neutralizing the carbon dioxide emissions facilitates the transition to the renewable energy power system. Meanwhile, the concerns about the volatility of renewable energies are growing as the rotational inertia of power system becomes inadequate. To maintain the frequency stability of power system, some studies for configuring inertia energy storage systems (ESSs) are carried out, mainly focusing on the allocation of virtual inertia from grid-forming ESS. In contrast, the allocation of virtual inertia from grid-following ESS has not been well elaborated and the differences in virtual inertia provided by these two modes are yet to be revealed. Based on H2$\mathcal {H}_2$-norm and Kron reduction, firstly, the state-space model of post-disturbance system is established, together with the transient performance evaluation. Then the inertia characteristics of both grid-forming and grid-following devices are formulated, followed by the unified gradient descent optimization method for allocating virtual inertia. A modified IEEE 39-bus system and its time-domain simulations help in the verification of the contribution of this paper. Through the comparative analysis of corresponding optimal results, the conclusions from two aspects are drawn: in terms of transient frequency support, the grid-forming devices can provide no less than 26%$26\%$ better inertia support; with the higher power capacity and similar energy capacity, the grid-forming devices can relieve the response pressure of other generators by approximately 77.1%$77.1\%$. The inertia modelling of both grid-forming and grid-following devices is established for a more accurate configuration of inertia. A unified gradient descent optimization method for allocating virtual inertia is proposed. The differences between virtual inertia provided by grid-forming and grid-following devices are analysed. image

Grid Inertia and Damping Support Enabled by Proposed Virtual Inductance Control for Grid-Forming Virtual Synchronous Generator

An Adaptive Inertia Control to Improve Stability of Virtual Synchronous Machines under Various Power Grid Strength

Stability Analysis and Improvement of Three-Phase Grid-Connected Power Converters with Virtual Inertia Control

An Improved Virtual Inertia Control for Three-Phase Voltage Source Converters Connected to a Weak Grid

Damping Low-Frequency Oscillations Through VSC-HVdc Stations Operated As Virtual Synchronous Machines

Improved Power Decoupling Control Strategy Based on Virtual Synchronous Generator

Analysis of Inertia Mechanism of Grid-tied Photovoltaic Power Generation System with Virtual Inertia Control

Comparative Analysis and Optimal Allocation of Virtual Inertia from Grid‐forming and Grid‐following Controlled ESSs

Rotor Inertia Adaptive Control and Inertia Matching Strategy Based on Parallel Virtual Synchronous Generators System

Improved Adaptive Inertia Control of VSG for Low Frequency Oscillation Suppression

Adaptive Inertia VSG Control Method Involving Power and Power Change Rate

Research on design and simulation experiment of virtual inertia controller for doubly fed induction generator

Modeling and Analysis of Inner Controls Effects on Damping and Synchronizing Torque Components in VSG-Controlled Converter

Adaptive Inertia Control of Virtual Synchronous Generator Based on Power Feedback

Analysis and Mitigation of Sub-Synchronous Resonance for Doubly Fed Induction Generator under VSG Control

Improved VSG strategy of grid-forming inverters for supporting inertia and damping

Enhanced Synchronization Stability of Grid-Forming Inverters With Passivity-Based Virtual Oscillator Control

Dynamic Virtual Inertia and Damping Control for Zero-Inertia Grids

Dynamic Stability Study of Grid-Connected Inverter Based on Virtual Synchronizer under Weak Grid

A New Perspective for Relating Virtual Inertia With Wideband Oscillation of Voltage in Low-Inertia DC Microgrid

A Robust Damping Control for Virtual Synchronous Generators Based on Energy Reshaping