Abstract:The Beam Dump Facility (BDF) is a planned fixed-target installation in CERN's North Area, set to start operating in 2031. A proton beam of 400 GeV/c will be delivered in 1 s pulses of 4e13 protons every 7.2 s, amounting to 4e19 protons on target (PoT) per year, with an average thermal power deposition of 305 kW. The experiment requires high-Z and high-density materials and involves challenging thermomechanical conditions; hence, a water-cooled refractory metal core is proposed. To prevent corrosion and erosion, the target materials - tungsten and a molybdenum-based alloy, TZM-, are clad with a tantalum alloy using hot isostatic pressing. To verify the reliability of the target design and manufacturing process, a reduced-scale prototype target was manufactured and irradiated with 2.4e16 PoT in 2018. This paper presents the findings of the post-irradiation examination (PIE) conducted 2.5 years later. The PIE consisted of non-destructive and destructive activities, including film imaging, microscopy, metrology, ultrasonic testing, microstructural analysis, and mechanical and thermal characterization. No irradiation effects resulting from thermal stresses, such as geometrical changes or cracks in the cladding, were observed, and it was determined that the bonding between the core and cladding materials was robust. Moreover, no changes were detected in the microstructures or mechanical properties of the bulk materials. In conclusion, the robustness of the target baseline design and manufacturing process was confirmed, validating its suitability for operating under the desired conditions. Nonetheless, the observed brittleness of sintered tungsten indicates a potential area for improvement to enhance the lifetime of the BDF target. Overall, the examinations provided valuable insights into the performance of the prototype and indicated potential refinements for the future BDF target complex.

Target tests for the ILC positron source Talk presented at the International Workshop on Future Linear Colliders (LCWS2023)

Radiation damage of the ILC positron source target

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

R&D for Positron Sources at High-Energy Lepton Colliders

Development of Rotating Target with Ferrofluid Seal for ILC Electron-Driven Positron Source

Post-irradiation examination of a prototype tantalum-clad target for the Beam Dump Facility at CERN

A Liquid Xenon Positron Target Concept

Material development towards a solid 100 kW electron-gamma converter for TRIUMF-ARIEL

Target Development Using the Method of High-Intensity Vibrational Powder Plating (HIVIPP) at the Center for Accelerator Target Science (CATS) at Argonne National Laboratory (ANL)

Undulator-Based Positron Source at 250 GeV CM Energy with Different Optical Matching Devices: Pulsed Flux Concentrator and Quarter Wave Transformer

A Comparison of RIST and ISOLDE Tantalum Targets and Geometries Used On-Line at ISOLDE

High-power electron beam tests of a liquid-lithium target and characterization study of (7)Li(p,n) near-threshold neutrons for accelerator-based boron neutron capture therapy

Novel materials for next-generation accelerator target facilities

Thermal and Structural Characterization of a Titanium Carbide/Carbon Composite for Nuclear Applications

Upgrade of the ILC Cryomodule

Monte Carlo based studies of a polarized positron source for International Linear Collider (ILC)

Updated Results of a Solid-State Sensor Irradiation Study for ILC Extreme Forward Calorimetry

High intensity proton beam impact at 440 GeV/c on Mo and Cu coated CfC/graphite and SiC/SiC absorbers for beam intercepting devices

Latest R\&D news and beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

Design of the EURISOL multi-MW target assembly: radiation and safety issues

Target fabrication for laser-ion acceleration research at the Technological Laboratory of the LMU Munich