Impact of SiO2 nanoparticle morphology on scattering efficiency for random lasers

Yan D. R. Machado,Gleice C. M. Germano,Edison Pecoraro,Antonio Mario L. M. Costa,Isabel C. S. Carvalho

DOI: https://doi.org/10.1016/j.optmat.2023.114775

2023-07-30

Abstract:In this work, we compared the effect of Quartzite nanoparticles (QtzNP - crystalline SiO2) and amorphous silica nanoparticles (ASNP) as scatters in a random laser (RL), correlating the laser efficiency to the morphology and refractive index (RI) of the scatterers. The RL was based on a laser media containing suspensions of QtzNPs or ASNPs in Rhodamine 6G (Rh6G) and ethylene glycol (EG) suspension. It was observed a considerable increase in RL efficiency for QtzNPs, as compared to ASNPs, even for concentrations as low as 0.5mg/mL. Such grow in the RL eficiency is attributed to the higher RI of QtzNPs (n=1.54), which in-creases the reflectance of light on the particles surface and the high field scattering intensity in the sharp edges of the flat slab shapes, associated to the particle's morphology. Finite Element Method (FEM) simu-lations were also performed for different particle size and shapes and an output increase is noticed for QtzNPs when compared with the ASNP confirming the experimental results. The comparison between the morphology of QtzNPs and ASNPs on scattering efficiency reported here contribute to optimize the performance of laser systems with natural and synthetic nanomaterials.

Optics,Applied Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: **To explore how the morphology of silica nanoparticles (SiO₂ NPs) affects the scattering efficiency of random lasers (RL)**. Specifically, the author compared the performance of quartzite nanoparticles (QtzNPs, crystalline SiO₂) and amorphous silica nanoparticles (ASNP) as scatterers in random lasers, and explored the influence of the morphology and refractive index (RI) of these nanoparticles on laser efficiency.

### Main problems
1. **Influence of nanoparticle morphology on scattering efficiency**:
- The author studied the influence of SiO₂ nanoparticles with different morphologies (such as spherical and polyhedral morphologies with sharp edges and flat surfaces) on the performance of random lasers through experiments and simulations.

2. **Influence of refractive index difference**:
- The refractive index of quartzite nanoparticles is relatively high (n = 1.54), while that of amorphous silica nanoparticles is relatively low (n = 1.46). The author studied the influence of this refractive index difference on light scattering and reflection, and further on laser efficiency.

3. **Efficient scattering at low concentrations**:
- The author observed that even at a low concentration (0.5 mg/mL), quartzite nanoparticles can significantly improve the efficiency of random lasers. This is attributed to their high refractive index and unique morphological features, such as sharp edges and flat surfaces.

### Experimental design and methods
- **Material preparation**: Quartzite nanoparticles were obtained by grinding natural quartzite, and amorphous silica nanoparticles were purchased commercially or synthesized.
- **Solution preparation**: Rhodamine 6G (Rh6G) and ethylene glycol (EG) were used as solvents to prepare suspensions containing different concentrations of nanoparticles.
- **Characterization means**: Scanning electron microscopy (SEM) and energy - dispersive X - ray spectroscopy (EDS) were used to characterize the morphology and composition of nanoparticles.
- **Laser property testing**: Samples were excited by a pulsed Nd:YAG laser to measure the emission spectrum and threshold energy.
- **Numerical simulation**: The finite element method (FEM) and COMSOL Multiphysics software were used to simulate the electromagnetic scattering characteristics of nanoparticles with different morphologies.

### Conclusions
Through experimental and simulation results, the author found that:
- **Due to their higher refractive index and unique morphology (sharp edges and flat surfaces), quartzite nanoparticles exhibit higher scattering efficiency in random lasers**.
- **These characteristics enable quartzite nanoparticles to achieve efficient laser output at a lower concentration**, thus providing new ideas for optimizing laser systems based on natural and synthetic nanomaterials.

### Formula representation
- Refractive index formula: \[ n=\sqrt{\epsilon_r} \]
where \( n \) is the refractive index and \( \epsilon_r \) is the relative permittivity.

- The Mie scattering theory is applicable to spherical particles, and its scattering cross - section formula is:
\[ Q_{\text{ext}} = Q_{\text{sca}}+Q_{\text{abs}} \]
where \( Q_{\text{ext}} \) is the total extinction cross - section, \( Q_{\text{sca}} \) is the scattering cross - section, and \( Q_{\text{abs}} \) is the absorption cross - section.

Through the above research, the author revealed the important influence of nanoparticle morphology and refractive index on the performance of random lasers, providing a valuable reference for future research and applications.