Abstract:PURPOSE: To perform experimental as well as independent Monte Carlo (MC) evaluation of the MC algorithm implemented in RADIANCE version 4.0.8, a dedicated treatment planning system (TPS) for 3D electron dose calculations in intraoperative radiation therapy (IOERT).METHODS AND MATERIALS: The MOBETRON 2000 (IntraOp Medical Corporation, Sunnyvale, CA) IOERT accelerator was employed. PDD and profiles for five cylindrical plastic applicators with 50-90 mm diameter and 0°, 30° beveling were measured in a water phantom, at nominal energies of 6, 9 and 12 MeV. Additional PDD measurements were performed for all the energies without applicator. MC modeling of the MOBETRON was performed with the user code BEAMnrc and egs_chamber of the MC simulation toolkit EGSnrc. The generated phase space files of the two 0°-bevel applicators (50 mm, 80 mm) and three energies in both RADIANCE and BEAMnrc, were used to determine PDD and profiles in various set-ups of virtual water phantoms with air and bone inhomogeneities. 3D dose distributions were also calculated in image data sets of an anthropomorphic tissue-equivalent pelvis phantom. Image acquisitions were realized with a CT scanner (Philips Big Bore CT, Netherlands). Gamma analysis was applied to quantify the deviations of the RADIANCE calculations to the measurements and EGSnrc calculations. Gamma criteria normalized to the global maximum were investigated between 2%, 2 mm and 3%, 3 mm.RESULTS: RADIANCE MC calculations satisfied the gamma criteria of 3%, 3 mm with a tolerance limit of 85% passing rate compared to in- water phantom measurements, except for the dose profiles of the 30° beveled applicators. Mismatches lay in surface doses, in umbra regions and in the beveled end of the 30° applicators. A very good agreement to the EGSnrc calculations in heterogeneous media was observed. Deviations were more pronounced for the larger applicator diameter and higher electron energy. In 3D dose comparisons in the anthropomorphic phantom, gamma passing rates were higher than 96 % for both simulated applicators.CONCLUSIONS: RADIANCE MC algorithm agrees within 3%, 3 mm criteria with in-water phantom measurements and EGSnrc MC dose distributions in heterogeneous media for 0°-bevel applicators. The user should be aware of missing scattering components and the 30° beveled applicators should be used with attention.

On the use of SRIM for calculating arc-dpa exposure

Predicting displacement damage for ion irradiation: Origin of the overestimation of vacancy production in SRIM full-cascade calculations

Re-Evaluating Ion And Neutron Irradiation Data With Calculated Applicable Arc-Dpa

Improving atomic displacement and replacement calculations with physically realistic damage models

Evaluation of primary radiation damage cross sections with uncertainties for charged particles

Systematic study of displacement threshold and the near-threshold primary radiation damage model

Monte Carlo dosimetry for a EURADOS WG 10 and RENEB field test of retrospective dosimetry techniques in realistic exposure scenarios

Calculation and verification of neutron irradiation damage with differential cross sections

Automation and optimization of stopping and range of ions in matter simulation runtime

SRIM simulation of irradiation damage by protons in InAs/GaSb type-II superlattices

Evaluation of RADIANCE Monte Carlo algorithm for treatment planning in electron based Intraoperative Radiotherapy (IOERT)

Absorbed dose evaluation of Auger electron-emitting radionuclides: impact of input decay spectra on dose point kernels and S-values

Proposal of a Multiscale High Accuracy Engineering Approach for Single-Event Effects Analysis in Modern Technologies

The Use of Variance Reduction Techniques for Photon Dose Estimation in the Design of Radiotherapy Facilities at 10 and 15 MeV via Monte Carlo Simulations

Examining real-time TDDFT non-equilibrium simulations for the calculation of electronic stopping power

Dose calculations for asymmetric fields defined by independent collimators using symmetric field data

Energy Spectrum of Primary Knock-on Atoms and Atomic Displacement Calculations in Metallic Alloys Under Neutron Irradiation

Application of the First Collision Source Method to CSNS Target Station Shielding Calculation

A methodology to abridge microdosimetric distributions without a significant loss of the spectral information needed for the RBE computation in carbon ion therapy

Computationally-efficient stochastic cluster dynamics method for modeling damage accumulation in irradiated materials

The effect of recombination radiation on the temperature and ionization state of partially ionized gas