Abstract:The ESTHER shock tube is a new state-of-the-art facility at Instituto Superior Técnico designed to support future ESA planetary exploration missions. Its driver is a high-pressure combustion chamber using a mixture of He:H2:O2 ignited by a high-power Nd:YAG laser. Both hydrogen as an energy vector and laser ignition are promising techniques with applications in high-pressure combustion. The influence of gas mixture and laser parameters, namely the air:fuel ratio, filling pressure, inert gas dilution and ignition mode, on the combustion and thus shock tube performance were extensively studied. A second, low-velocity driver mixture with nitrogen in place of helium as a dilutant was also studied and experimental shots are done.
Our results show that the filling pressure and helium dilution are the most dominant parameters in both peak pressure, acoustic oscillation and combustion velocity. The gas mixture peak pressure and acoustic wave amplitude increase with the increased filling pressure. Yet, the increased filling pressure lowers the combustion velocity. The helium in the mixture had a dilution effect, with it lowering the overall effectiveness of combustion. Having higher dilution factors lowers the combustion compression ratio, acoustic waves amplitude and flame velocity. The air:fuel equivalence ratio influence was expected with faster flame and peak pressures at the stoichiometric region. Nitrogen diluted shots have drastically lower compression ratios and flame velocity when compared to the helium ones, besides it, the acoustic perturbation was stronger. ``tulip" flames and deflagration to detonation transitions phenomena were identified in some of the experiments.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to improve the performance of the shock tube in the European High - Enthalpy Research Shock Tube (ESTHER) by optimizing the gas mixture in the combustion driver and laser parameters. Specifically, the research focuses on the following aspects:
1. **Influence of gas mixture**:
- The influence of the air - fuel ratio (the ratio of air to fuel) on combustion and shock - tube performance.
- The influence of inert gas (helium or nitrogen) dilution on combustion efficiency, compression ratio, sound - wave amplitude, and flame speed.
2. **Influence of laser parameters**:
- The influence of laser focusing methods (using a 100 - millimeter double - convex lens or without using a lens) on ignition effect, sound - wave amplitude, and peak pressure.
- The effect of laser ignition at different filling pressures.
3. **Analysis of combustion modes**:
- Research on whether the transition from deflagration to detonation will occur during the combustion process.
- Analysis of the "tulip" flame phenomenon and its influence on the combustion process.
4. **Verification of experimental results**:
- Verify the theoretical model through experimental data to ensure the predictability, repeatability, and reliability of the shock tube.
### Main research contents
1. **Influence of gas mixture**:
- **Air - fuel ratio**: The research found that when the air - fuel ratio is close to the stoichiometric ratio (λ ≈ 1), the peak pressure and flame speed reach the maximum. Although the fuel - rich mixture (λ < 1) has a faster combustion speed, its peak pressure is lower.
- **Inert gas dilution**: Both helium and nitrogen, as diluents, will reduce the combustion efficiency. Helium has a stronger dilution effect, resulting in a decrease in the compression ratio, sound - wave amplitude, and flame speed. The mixture diluted with nitrogen burns more slowly and has a larger sound - wave amplitude.
2. **Influence of laser parameters**:
- **Laser focusing**: Using a 100 - millimeter double - convex lens to focus the laser can reduce the sound - wave amplitude and peak pressure, and at the same time reduce the average flame speed. The unfocused laser may produce multiple ignition points on the beam path, thus accelerating the gas combustion rate.
- **Filling pressure**: As the filling pressure increases, the sound - wave amplitude increases, and the mixture is more likely to detonate. When the filling pressure is between 60 and 70 bar, the sound - wave amplitude increases sharply.
3. **Analysis of combustion modes**:
- **Transition from deflagration to detonation**: The research found that under certain conditions, the mixture will change from deflagration to detonation. This transition is usually accompanied by the formation of a "tulip" flame, the inversion of the flame front, and the start of the reaction chain in the preheating zone.
- **"Tulip" flame**: The formation of this flame shape is related to hydrodynamic instability and vortices. The central area of the flame front decelerates, while the outer edge near the tube wall accelerates, resulting in a change in the flame shape.
### Experimental methods
- **Experimental device**: The ESTHER shock tube consists of a high - pressure combustion chamber and a low - pressure driving part, separated by a rupturable diaphragm in the middle. The combustion chamber is ignited by a high - power Nd:YAG laser, and the laser is focused into the combustion chamber through an optical system.
- **Measurement method**: Use a piezoelectric pressure sensor to record the pressure signal during the combustion process, and analyze the spectral characteristics of the pressure signal through the fast Fourier transform (FFT).
### Conclusions
- **Main conclusions**: Both helium and nitrogen, as diluents, will reduce the combustion efficiency, but helium has a more significant effect. Laser focusing can reduce the sound - wave amplitude and peak pressure, but the unfocused laser may lead to faster combustion. The increase in filling pressure will enhance the sound - wave amplitude and make the mixture more likely to detonate.
- **Future work**: Further study the combustion mechanisms under different conditions, especially the mechanism of unfocused laser ignition, and the formation process of the "tulip" flame. Introduce high - speed imaging diagnostic techniques to better understand these phenomena.