Abstract:Nitrogen is the most important cryogen in superconductivity. This study investigates the heat transfer characteristics of flow boiling in a horizontal macro-tube with an inner diameter of 10 mm, particularly focusing on flow boiling at negative gauge pressure. The experiments cover the following ranges: inlet pressure from −31.0 to 2.5 kPa, mass flux from 27.0 to 71.3 kg/(m 2 ·s), and heat flux from 0 to 28.68 kW/m 2 . The effects of operating parameters on the heat transfer coefficient (HTC) are examined, and the HTC data are compared with the predicted value from four correlations. At the bottom wall, the HTC distribution exhibits a "two-peak" shape. The primary peak is dominated by nucleate boiling in bubbly, plug, and slug flow with low vapor quality, while the secondary peak is dominated by convective evaporation with higher vapor quality. These two regions are roughly divided by the vapor quality of 0.3 to 0.4. In stratified flow, the HTC at the top wall is generally lower than that at the bottom. The HTC increases as the pressure decreases, particularly in the convective evaporation region. This is attributed to the high liquid–vapor density ratio, extensive thermal conductivity, and substantial surface tension at lower pressure. The effect of heat flux or mass flux on the HTC at the bottom wall differs between the nucleate boiling and convective evaporation regions. Increasing the heat flux improves the HTC where nucleate boiling dominates, while increasing the mass flux significantly improves convective evaporation, especially at higher heat flux. All selected correlations overestimate the HTC at the top wall. The Shah correlation demonstrates the best prediction accuracy for the HTC at the bottom wall, both at near atmospheric pressure (Mean Relative Error, MRE = 21 %) and at negative pressure (MRE = 19 %).

Heat and mass transfer during a sudden loss of vacuum in a liquid helium cooled tube -- Part IV: Freeze range

Advances in understanding vacuum break dynamics in liquid helium-cooled tubes for accelerator beamline applications

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

An Experiment-Based Comparative Investigation of Correlations for Microtube Gas Flow

Numerical Study on the Flow and Heat Transfer Characteristics in CFETR Cryostat During a Loss of Vacuum

Visual Study of Flow Pattern Evolution of Flow Boiling in A Microtube

Experimental Study On Pulse Tube Refrigeration With Helium And Nitrogen Mixtures

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

Experiment for transient effects of sudden catastrophic loss of vacuum on a scaled superconducting radio frequency cryomodule

A cryogenic-helium pipe flow facility with unique double-line molecular tagging velocimetry capability

Experimental Study Of The Energy Separation In A Vortex Tube

Study on micro-liquid droplets behavior at the expander of the pulse tube cryocooler under 5 K based on molecular dynamics

Cryogenic Two-Phase Flow and Heat Transfer Under Terrestrial and Microgravity

Flow boiling of liquid nitrogen in a horizontal macro-tube at low pressure: Part II – Heat transfer characteristics

Flow boiling of liquid nitrogen in a horizontal macro-tube at low pressure: Part I - flow pattern, two-phase flow instability, and pressure drop

Ultrafast Axial Freezing in a Liquid-Filled Capillary Tube

Cryogenic chilldown process under low flow rates

Scattering and absorption of ultracold atoms by nanotubes

An experimental study on terrestrial cryogenic tube chilldown II. Effect of flow direction with respect to gravity and new correlation set

Quench-Spot Detection for Superconducting Accelerator Cavities Via Flow Visualization in Superfluid Helium-4

Investigation of transient chill down phenomena in tubes using liquid nitrogen