Abstract:This paper aims to design a stabilized Adaptive Model Predictive Control (MPC) for nonlinear continuous systems with unknown dynamics at the start time. The proposed method is based on the Lyapunov MPC (LMPC) where the derivative of the Lyapunov function of the closed-loop system is limited to be less than that under an auxiliary Lyapunov controller. Different from the existing LMPC methods, this paper provides an online constraint updating strategy, which gradually reduces the conservation of the constraint. Specifically, the piece-wise linear (PWL) model updated by the Set-Membership (SM) identification method is adopted in the constraint and the auxiliary controller design, which can result in a non-increasing boundary of the model error. Then, a sufficient condition that guarantees the stabilization of the closed-loop system is deduced, which takes the effect of sample-and-hold implementation and the error boundary of the PWL model into account. By this condition, an optimization problem to update the Lyapunov controller for relaxing the constraints of MPC is proposed. We prove that, by the proposed method, the states will eventually converge to a small region around the equilibrium, both this small region and the conservatism of MPC decrease with the increasing of the accuracy of the PWL model. The application of the proposed method to a chemical process demonstrates the effectiveness of the proposed method. Note to Practitioners—The control problem of nonlinear continuous systems with unknown dynamics has attracted the attention of researchers. This article develops an Adaptive MPC for this kind of system, which updates the boundary of uncertainties according to the measurement, and updates the constraints of MPC according to the updated uncertainty boundary. It provides a guaranteed stabilization and continuously relaxed constraint design for MPC where machine learning-based models are employed to predict the future trajectory. In the process of implementation, the method solves two optimization problems: one is to get the parameters of constraints which is based on the PWL model, and the other is used to optimize the future trajectory with the updated constraints. To proceed, the initial boundary of the uncertainty should be given at the initial instant, the initialization of PWL models and constraints can be configured based on it. The proposed method can be used for tracking control of chemical processes, power systems, robots, etc., where the accurate dynamics are not provided in advance and an improved performance is required.

Require Process Control? LSTMc is all you need!

Dynamic Matrix Control of a Quadruple-Tank Process

Latent-Variable Nonlinear Model Predictive Control Strategy For A Ph Neutralization Process

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Linear Mismatched Model Based Offset-Free Mpc For Nonlinear Constrained Systems With Both Stochastic And Deterministic Disturbances And Its Application To Cstr

Learning MPC for Process Dynamic Working Condition Change Tasks under Model Mismatch

Stability Guaranteed Model Predictive Control with Adaptive Lyapunov Constraint

Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model

SVD-Based Robust Distributed MPC for Tracking Systems Coupled in Dynamics with Global Constraints

Data-Driven Tracking MPC for Changing Setpoints

Synthesis of ILC–MPC Controller with Data-Driven Approach for Constrained Batch Processes

Steady-state Target Calculation Integrating Economic Optimization for Constrained Model Predictive Control

Reduced Order Model Predictive Control For Setpoint Tracking

Explicit machine learning-based model predictive control of nonlinear processes via multi-parametric programming

Distributed MPC for Tracking Based on Reference Trajectories

Two-Layer Model Predictive Control For Chemical Process Model With Integrating Controlled Variables

Model Predictive Control for setpoint tracking

MPC for tracking piecewise constant references for constrained linear systems

Control of an integrated first and second-generation continuous alcoholic fermentation process with cell recycling using model predictive control

MPC: Current practice and challenges

Tracking of Uncertain Robotic Manipulators Using Event-Triggered Model Predictive Control With Learning Terminal Cost