Abstract:Technologies including (3D-) (bio-) printing, diesel engines, laser-induced forward transfer, and spray cleaning require optimization and therefore understanding of micrometer-sized droplets impacting at velocities beyond 10 m s(-1). However, as yet, this regime has hardly been addressed. Here we present the first time-resolved experimental investigation of microdroplet impact at velocities up to V-0 = 50 m s(-1), on hydrophilic and -phobic surfaces at frame rates exceeding 10(7) frames per second. A novel method to determine the 3D- droplet profile at sub-micron resolution at the same frame rates is presented, using the fringe pattern observed from a bottom view. A numerical model, which is validated by the side- and bottom-view measurements, is employed to study the viscous boundary layer inside the droplet and the development of the rim. The spreading dynamics, the maximal spreading diameter, the boundary layer thickness, the rim formation, and the air bubble entrainment are compared to theory and previous experiments. In general, the impact dynamics are equal to millimeter-sized droplet impact for equal Reynolds-, Weber- and Stokes numbers (Re, We, and St, respectively). Using our numerical model, effective scaling laws for the progression of the boundary layer thickness and the rim diameter are provided. The dimensionless boundary layer thickness develops in time (t) according to delta(BL) similar to D-0/root Re (t/tau)(0.45), and the diameter of the rim develops as D-Rim similar to D-0/root We (t/tau)(0.68), with drop diameter D-0 and inertial time scale tau = D-0/V-0. These scalings differ from previously assumed, but never validated, values. Finally, no splash is observed, at variance with many predictions but in agreement with models including the influence of the surrounding gas. This confirms that the ambient gas properties are key ingredients for splash threshold predictions.

On droplet falling velocity

Experimental Study of a Drop Bouncing on a Liquid Surface

Simulation and analytical modeling of high-speed droplet impact onto a surface

Microdroplet Impact at Very High Velocity

Experiment study of droplet impacting on a static hemispherical liquid film

Universality of Droplet Impingement: Low-to-High Viscosities and Surface Tensions

On Liquid Viscosity Effects on Droplet Splash and Receding Breakup on a Smooth Solid Surface at Atmospheric Pressure

The role of viscosity on drop impact forces on non-wetting surfaces

Effects of operating conditions on droplet deposition onto surface of atomization impinging spray

Theoretical Investigation of the Influence of Liquid Physical Properties on Effervescent Atomization Performance

Inertia&viscosity Dictate Drop Impact Forces

Dynamics of high-speed micro-drop impact: numerical simulations and experiments at frame-to-frame times below 100 ns.

Experimental Study on Droplet Splash and Receding Breakup on a Smooth Surface at Atmospheric Pressure

Experimental Studies on the Effect of Reynolds and Weber Numbers on the Impact Forces of Low-Speed Droplets Colliding with a Solid Surface

– 1722-speed micro-drop impact : numerical simulations and experiments at frame-to-frame times below 100 ns †

Dynamics and Maximum Spreading of Droplet Impact on a Stationary Droplet on the Surface

Simulation of dynamic characteristics of droplet impact on liquid film

Droplet Oscillation After Impact On A Solid Surface

Experimental research on the dynamics of a train of droplets impacting, from droplets to liquid film, continuity and inheritance

Droplet rebound and dripping during impact on small superhydrophobic spheres

Modelling of a Single Drop Impact Onto Liquid Film Using Particle Method