Abstract:The aim of the presented work is the development of single-stage amplification resistive Micro Pattern Gas Detectors (MPGD) based on Micromegas technology with the following characteristics: ability to efficiently operate up to 10 MHz/cm$^2$ counting rate; scalability to large areas; fine granularity readout with small pads of the order of mm$^2$; good spatial and time resolutions (below 100 $\mu$m and 10 ns, respectively). The miniaturization of the readout elements and the optimization of the spark protection system, as well as the stability and robustness under operation, are the primary challenges of the project. Two families of resistive patterns were realized using different techniques: pad-patterned embedded resistors and double-layer of Diamond Like Carbon (DLC) structures foils. Their main difference is that for the embedded resistors the charge is evacuated through independent pads, for double-layer DLC the resistive layers are continuous and uniform and the charge is evacuated through a network of dot-connections, several millimetres apart. Using the DLC technique, a medium-size detector with an active area of 400 cm$^2$ was recently built and tested, with the main results reported in this paper. Additionally, a large module (50x40 cm$^2$ active area), suitable for tiling large systems in future experiments, has been successfully realised and is currently undergoing testing and performance studies. The characterization and performance studies of the detectors were conducted using radioactive sources and an X-rays generator, with the detectors operated with various gas mixtures. A comparison of the results obtained with different resistive layouts and configurations is provided, with a particular focus on the response under high-rate exposure. Key results on tracking and timing performance from test-beam data for the latest constructed medium-size detector are also presented.

Towards robust PICOSEC Micromegas precise timing detectors

Photocathode characterisation for robust PICOSEC Micromegas precise-timing detectors

A large area 100 channel Picosec Micromegas detector with sub 20 ps time resolution

A large area 100-channel PICOSEC Micromegas detector with time resolution at the 20 ps level

Single channel PICOSEC Micromegas detector with improved time resolution

PICOSEC-Micromegas Detector, an innovative solution for Lepton Time Tagging

Timing performance of a multi-pad PICOSEC-Micromegas detector prototype

A Novel Diamond-like Carbon based photocathode for PICOSEC Micromegas detectors

Development of a Simulation Model and Precise Timing Techniques for PICOSEC-Micromegas Detectors

A UV Sensitive Integrated Micromegas with Timepix Readout

Development and preliminary tests of resistive microdot and microstrip detectors

High-Rate Capable Floating Strip Micromegas

Timing techniques with picosecond-order accuracy for novel gaseous detectors

Hybrid multi micropattern gaseous photomultiplier for detection of liquid-xenon scintillation

Piggyback resistive Micromegas

Resistive Fine Granularity Micromegas: Characterization and Performance for Different Spark Protection Resistive Schemes

New pixelized Micromegas detector with low discharge rate for the COMPASS experiment

Optimizing Neon-based Gas Mixtures for Two-stage Amplification Fast-timing Micromegas Detectors

Experimental Studies of Micromegas Detectors with Different Micro-Meshes

Development of innovative micropattern gaseous detectors with resistive electrodes and first results of their applications

High granularity resistive Micromegas for tracking detectors in future experiments