Abstract:A device called qubit energy tuner (QET) based on single flux quantum (SFQ) circuits is proposed for Z control of superconducting qubits. Created from the improvement of flux digital-to-analog converters (flux DACs), a QET is able to set the energy levels or the frequencies of qubits, especially flux-tunable transmons, and perform gate operations requiring Z control. The circuit structure of QET is elucidated, which consists of an inductor loop and flux bias units for coarse tuning or fine tuning. The key feature of a QET is analyzed to understand how SFQ pulses change the inductor loop current, which provides external flux for qubits. To verify the functionality of the QET, three simulations are carried out. The first one verifies the responses of the inductor loop current to SFQ pulses. The results show that there is about 4.2% relative deviation between analytical solutions of the inductor loop current and the solutions from WRSpice time-domain simulation. The second and the third simulations with QuTip show how a Z gate and an iSWAP gate can be performed by this QET, respectively, with corresponding fidelities 99.99884% and 99.93906% for only once gate operation to specific initial states. These simulations indicate that the SFQ-based QET could act as an efficient component of SFQ-based quantum-classical interfaces for digital Z control of large-scale superconducting quantum computers.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a qubit energy tuner (QET) based on single - flux - quantum (SFQ) circuits in order to achieve Z - control of superconducting qubits (especially flux - tunable transmon qubits). Specifically, the paper addresses the following aspects: 1. **Limitations of traditional methods**: As the number of qubits increases, traditional microwave electronics methods encounter bottlenecks in the number of input - output ports and cryogenic transmission lines, which limits the development of large - scale superconducting quantum computers. 2. **Requirement for efficient Z - control**: In order to achieve efficient digital Z - control, especially in large - scale superconducting quantum computers, new control methods and techniques need to be introduced. The paper proposes a QET based on SFQ circuits, aiming to overcome the shortcomings of existing methods and provide more flexible and precise Z - control means. 3. **Implementation of specific functions**: The QET can not only set the energy level or frequency of qubits, but also perform gate operations (such as Z - gate and iSWAP - gate) that require flux biasing. In addition, the QET can tune the frequency of qubits back to their idle frequencies after gate operations, thus ensuring the stability and accuracy of the system. ### Specific problems and solutions - **Problem**: How to effectively control the energy level of superconducting qubits through SFQ pulse signals? **Solution**: The paper designs a QET structure that includes an inductive loop and a flux - biasing unit. By receiving SFQ pulse signals, the QET can change the current in the inductive loop, and then provide external flux to adjust the energy level of qubits. - **Problem**: How to verify the functions of QET and its performance in practical applications? **Solution**: The paper conducts three simulations: - The first simulation verifies the response of the inductive loop current to SFQ pulses. - The second and third simulations respectively show how to use QET to perform Z - gate and iSWAP - gate operations, and calculate the corresponding fidelities (99.99884% and 99.93906% respectively). ### Conclusions and prospects The QET proposed in the paper provides a new approach for digital Z - control of SFQ - based quantum - classical interfaces, which is of great significance for the research and development of large - scale superconducting quantum computers. Future work will continue to optimize the design and performance of QET and explore its potential in other application scenarios, such as CZ - gate, flux - tunable couplers, and Josephson photomultiplier readout. Through these efforts, QET is expected to become one of the key components for building efficient and reliable large - scale superconducting quantum computers.

Qubit Energy Tuner Based on Single Flux Quantum Circuits

Simulations of Superconducting Quantum Gates by Digital Flux Tuner for Qubits

Single-flux-quantum-based Qubit Control with Tunable Driving Strength

Compact Pulse Schedules for High-Fidelity Single-Flux Quantum Qubit Control

Controllable Coupling Between a Nanomechanical Resonator and a Coplanar-Waveguide Resonator Via a Superconducting Flux Qubit

Counter-rotating Effect on Frequency Shift of Flux Qubit in Ultrastrongly Coupled Circuit-Quantum-electrodynamics System

A Tipping Pulse Scheme for A Rf-Squid Qubit

Experimental Realization of Two Qutrits Gate with Tunable Coupling in Superconducting Circuits.

Fast universal control of a flux qubit via exponentially tunable wave-function overlap

Speeding up qubit control with bipolar single-flux-quantum pulse sequences

High-Fidelity Qutrit Entangling Gates for Superconducting Circuits

Native approach to controlled-Z gates in inductively coupled fluxonium qubits

Fabrication and Characterization of Superconducting RSFQ Circuits

Efficient Transfer of an Arbitrary Qutrit State in Circuit Quantum Electrodynamics.

Landau-Zener-Stückelberg Spectroscopy of a Superconducting Flux Qubit

Microwave-driven Iswap-Like Gate for Fixed-Frequency Superconducting Transmon Qutrits

Efficient two-qutrit gates in superconducting circuits using parametric coupling

All-electrical operation of a spin qubit coupled to a high-Q resonator

High-precision pulse calibration of tunable couplers for high-fidelity two-qubit gates in superconducting quantum processors

Gate-Tunable Field-Compatible Fluxonium

Optimal control for fast and high-fidelity quantum gates in coupled superconducting flux qubits