Numerical Analysis of Thermo-Hydraulic Performance of FLiBe Flowing Through a Louvered-Fin Compact Heat Exchanger

Bahadir Dogan,M. Mete Ozturk,L. Berrin Erbay

2023-03-01

Abstract:The study focuses on the steady-state thermohydraulic behavior of the LiF-BeF2 (FLiBe) molten salt flowing through a compact heat exchanger with multi louvered fins in the cooling loop of a Molten Salt Reactor (MSR). This numerical benchmark study was conducted to obtain data both for baseline and cases with slow coolant circulation problems in the reactor. A series of numerical tests are conducted for low Reynolds numbers of 100 to 500 based on the louver pitch with different fin pitches and fin louver angles. The steady-state velocity profiles, temperature, and pressure fields are studied in detail. The heat transfer coefficient and pressure drop data are reported in terms of Colburn j-factor and Fanning friction factor f, and the volume goodness factor to get a performance comparison for FLiBe as the coolant in a Molten Salt Reactor. As regards findings of the analyses, when the louver angle steeps, the molten salt flow becomes more louvered direct which improves the interaction and heat transfer between the fin and molten salt. On the contrary, when the fin pitches increase, the flow becomes duct-directed that reducing the contact between fin and FLiBe which leads to a decline in thermal performance.

Fluid Dynamics

What problem does this paper attempt to address?

This paper attempts to address the steady-state thermofluidic performance of lithium fluoride-beryllium fluoride (FLiBe) molten salt in a compact heat exchanger with louvered fins in the cooling loop of a molten salt reactor (MSR). Specifically, the study aims to obtain baseline data and data on slow coolant circulation issues through numerical simulation to evaluate the performance of FLiBe as an MSR coolant.

### Main Research Content:
1. **Background and Motivation**:
- Molten salt reactors (MSRs) are considered a reliable nuclear power generation option for the future due to their low carbon emissions and sustainability.
- FLiBe molten salt is selected as the fuel salt and coolant for MSRs due to its excellent thermophysical properties.
- The design of compact heat exchangers is crucial for improving heat transfer efficiency and reducing costs.

2. **Research Objectives**:
- To study the flow and heat transfer performance of FLiBe molten salt in a compact heat exchanger with louvered fins through numerical simulation.
- To analyze the impact of different fin spacings and louver angles on the heat transfer coefficient and pressure drop.
- To evaluate the performance of FLiBe as an MSR coolant, particularly under low Reynolds number (100-500) conditions.

3. **Methods**:
- Numerical simulations using computational fluid dynamics (CFD) methods.
- Consideration of different fin spacings (1.5 mm, 2.0 mm, 2.5 mm) and louver angles (20°, 24°, 28°, 32°, 36°).
- Evaluation of heat transfer and pressure drop performance through the Colburn j factor and Fanning friction factor.

4. **Main Findings**:
- As the louver angle increases, the molten salt flow more directly contacts the fins, improving heat transfer efficiency.
- As the fin spacing increases, the molten salt flow becomes more "ducted," reducing contact with the fins and leading to a decrease in heat transfer performance.
- Detailed data on velocity distribution, temperature field, and pressure field were obtained through numerical simulation, providing important references for the application of FLiBe in MSRs.

### Conclusion:
This study provides detailed analysis of the thermofluidic performance of FLiBe molten salt in a compact heat exchanger with louvered fins through numerical simulation, offering important data support for optimizing the heat transfer efficiency of MSR cooling systems. The results indicate that appropriately designed louvered fins can significantly improve heat transfer efficiency, but the choice of fin spacing has a significant impact on performance.