Abstract:A precise measurement of optical power, forward voltage, and junction temperature of light-emitting diodes (LEDs) is the key for characterization and health monitoring of these devices. In many cases, LED characterization is carried out with relatively long (10 ms and longer) pulses, that is, in conditions in which self-heating can significantly impact measurement results. To overcome this limitation, this article proposes a fast and versatile measurement approach based on a specifically designed current source, with a maximum current of about 1 A, high stability (variations under 0.1%) and settling time s, and demonstrates its applicability to pulsed and transient characterization of power LEDs. The proposed system has the inherent advantages of 1) permitting a fast pulsed characterization of the devices, which—as we demonstrate—is much more accurate than quasipulsed or dc analysis; 2) allowing isothermal characterization of LEDs without requiring long settling times, with beneficial impact on the throughput of LED characterization; 3) allowing characterization of the voltage heating transient (during constant current operation), which is the key for junction temperature and thermal resistance extraction, as well as for the development of compact models; 4) monitoring the optical power during the self-heating transient; and 5) the spectrum of the device providing additional information, such as the peak-shift or the phosphor behavior. The efficacy of the proposed approach has been demonstrated by testing commercial LEDs: the results clearly indicate that a fast ( s) LED characterization is necessary for a proper extraction of the main spectral parameters and of the related temperature dependence.

Measuring Power with a Saturated Photodiode

A Wavelength-Insensitive All-Silicon In-Line Optical Power Monitor for Multimode Silicon Photonics

Optical power detector with broad spectral coverage, high detectivity, and large dynamic range

Design and research of a high precision digital optical power meter based on multitasking

Fast Characterization of Power LEDs: Circuit Design and Experimental Results

Design and Construction of an Affordable Optical Power Meter: Micro- to Milli-Watt in the 400-800 nm Range

On-chip optical power measurement by optical force

Optical Power Monitoring with Ultrahigh Sensitivity in Silicon Waveguides and Ring Resonators

High sensitivity third-order autocorrelation measurement by intensity modulation and third harmonic detection.

High-power Si-Ge Photodiode Assisted by Doping Regulation.

Design Of High Precision Optical Power Meter Based On Msp430

Optical power meter using radiation pressure measurement

A Wide Bandwidth Real-Time MEMS Optical Power Meter with High Resolution and Linearity

A micromechanical resonant optical power meter

Ultrahigh-sensitivity On-Chip Power Monitor Using a Resistive Microheater in a Silicon Waveguide

Power-Dependent Investigation of Photo-Response from GeSn-Based p-i-n Photodetector Operating at High Power Density

Compact Measurement of the Optical Power in High-Power LED Using a Light-Absorbent Thermal Sensor

A high dynamic range optical detector for measuring single photons and bright light

A Pulsewidth Measurement Technology Based on Carbon-Nanotube Saturable Absorber

A wide-band monolithic quasi-optical power meter for millimeter- and submillimeter-wave applications

Multi-kilowatt cw laser power measurement comparison between national standards