Abstract:Nanofiltration (NF) with high water flux and precise separation performance with high Li+/Mg2+ selectivity is ideal for lithium brine recovery. However, conventional polyamide-based commercial NF membranes are ineffective in lithium recovery processes due to their undesired Li+/Mg2+ selectivity. In addition, they are constrained by the water permeance selectivity trade-off, which means that a highly permeable membrane often has lower selectivity. In this study, we developed a novel nonpolyamide NF membrane based on metal-coordinated structure, which exhibits simultaneously improved water permeance and Li+/Mg2+ selectivity. Specifically, the optimized Cu–m-phenylenediamine (MPD) membrane demonstrated a high water permeance of 16.2 ± 2.7 LMH/bar and a high Li+/Mg2+ selectivity of 8.0 ± 1.0, which surpassed the trade-off of permeance selectivity. Meanwhile, the existence of copper in the Cu–MPD membrane further enhanced anti-biofouling property and the metal-coordinated nanofiltration membrane possesses a pH-responsive property. Finally, a transport model based on the Nernst–Planck equations has been developed to fit the water flux and rejection of uncharged solutes to the experiments conducted. The model had a deviation below 2% for all experiments performed and suggested an average pore radius of 1.25 nm with a porosity of 21% for the Cu–MPD membrane. Overall, our study provides an exciting approach for fabricating a nonpolyamide high-performance nanofiltration membrane in the context of lithium recovery.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02252?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02252</a>.SEM images and photos of prepared membranes; ζ-potential of Cu–MPD NF membrane and PES substrate; AFM images of prepared membranes; XPS spectra and ζ-potential of prepared membranes; copper loading in the prepared membrane with different Cu/MPD ratios; UV–vis spectra and thickness of Cu–MPD oligomers with different Cu/MPD ratios; separation performance of membrane with different components; membrane anti-biofouling ability test by rotating disk; membrane anti-biofouling ability test by cross-flow filtration; copper leaching test in pure water; comparison of membrane filtration performance in this work to the literature; membrane long-term running stability test; feed, retentate, and permeate concentration in 12 h filtration; recipe for fabricating the Cu–MPD membrane; contact angle and isoelectrical point of prepared membranes; comparison of this work to the literature; Cu loading concentration in different types of membranes; average biofilm thickness and average biovolume on the surface of prepared membranes; I and Cu concentrations before and after 5 h reaction; performance of membrane with different recipes; and recipe of the membranes in Table S7 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02252/suppl_file/am1c02252_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Lithium recovery from the spent lithium-ion batteries by commercial acid-resistant nanofiltration membranes: A comparative study

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Positively‐Coated Nanofiltration Membranes for Lithium Recovery from Battery Leachates and Salt‐Lakes: Ion Transport Fundamentals and Module Performance

Recovery of lithium salt from spent lithium‐ion battery by less polar solvent wash and water extraction

Tailorable metal–organic framework based thin film nanocomposite membrane for lithium recovery from wasted batteries

Novel Positively Charged Metal-Coordinated Nanofiltration Membrane for Lithium Recovery

Lithium recovery and solvent reuse from electrolyte of spent lithium-ion battery

Green regeneration and high-value utilization technology of the electrolyte from spent lithium-ion batteries

Unprecedented Mg2+/Li+ separation using layer-by-layer based nanofiltration hollow fiber membranes

Recovery of lithium from the effluent obtained in the process of spent lithium-ion batteries recycling

Novel approach to recycling of valuable metals from spent lithium-ion batteries using hydrometallurgy, focused on preferential extraction of lithium

Lithium-Ion Battery Recycling: Metal Recovery from Electrolyte and Cathode Materials by Electrodialysis

Selective Recovery of Valuable Metals from Spent Lithium-Ion Batteries – Process Development and Kinetics Evaluation

Purification and Characterization of Reclaimed Electrolytes from Spent Lithium-Ion Batteries

Separation performance and fouling analyses of nanofiltration membrane for lithium extraction from salt lake brine

Impurity removal with highly selective and efficient methods and the recycling of transition metals from spent lithium-ion batteries

A sustainable approach for selective recovery of lithium from cathode materials of spent lithium-ion batteries by induced phase transition

Membrane-based technologies for lithium recovery from water lithium resources: A review

Nanofiltration Membrane Characterization and Application: Extracting Lithium in Lepidolite Leaching Solution

Mechanism of Lithium Ions Selectivity Through Membranes: A Brief Review

Electrospun nanofiber membrane of dibenzo 14-crown-4-ether polyimide for efficient selective lithium recovery from discarded lithium-ion batteries