Abstract:Plant fiber-reinforced polylactic acid (PLA) exhibits excellent mechanical properties and environmental friendliness and, therefore, has a wide range of applications. This study investigated the mechanical properties of three short plant fiber-reinforced PLA composites (flax, jute, and ramie) using mechanical testing and material characterization techniques (SEM, FTIR, and DSC). Additionally, we propose a methodology for predicting the mechanical properties of high-content short plant fiber-reinforced composite materials. Results indicate that flax fibers provide the optimal reinforcement effect due to differences in fiber composition and microstructure. Surface pretreatment of the fibers using alkali and silane coupling agents increases the fiber–matrix interface contact area, improves interface performance, and effectively enhances the mechanical properties of the composite. The mechanical properties of the composites increase with increasing fiber content, reaching the highest value at 40%, which is 38.79% higher than pure PLA. However, further increases in content lead to fiber agglomeration and decreased composite properties. When the content is relatively low (10%), the mechanical properties are degraded because of internal defects in the material, which is 40.42% lower than pure PLA. Through Micro-CT technology, the fiber was reconstructed, and it was found that the fiber was distributed mainly along the direction of injection molding, and the twin-screw process changes the shape and length of the fiber. By introducing the fiber agglomeration factor function and correcting the Halpin-Tsai criterion, the mechanical properties of composite materials with different contents were successfully predicted. Considering the complex stress state of composite materials in actual service processes, a numerical simulation method was established based on transversely isotropic material using the finite element method combined with theoretical analysis. The mechanical properties of high-content short plant fiber-reinforced composite materials were successfully predicted, and the simulation results showed strong agreement with the experimental results.

Mathematical formulation of the machine learning backpropagation network and regression modelling of the chemical stability and thermal properties of PLA/HKUST-1 fabricated porous membranes

Radial Basis Function Neural Network and Overlay Sampling Uniform Design Toward Polylactic Acid Molecular Weight Prediction

A Hierarchical Nano to Micro Scale Modelling of 3D Printed Nano-Reinforced Polylactic Acid: Micropolar Modelling and Molecular Dynamics Simulation

Effect of temperature and relative humidity on hydrolytic degradation of additively manufactured PLA: characterization and artificial neural network modeling

A machine learning approach to characterise fabrication porosity effects on the mechanical properties of additively manufactured thermoplastic composites

Comparative study of evolutionary machine learning approaches to simulate the rheological characteristics of polybutylene succinate (PBS) utilized for fused deposition modeling (FDM)

Prediction of The Mechanical Behavior of Polylactic Acid Parts with Shape Memory Effect Fabricated by FDM

Machine learning investigation of polylactic acid bead foam extrusion

Numerical Calculation and Properties Study on Polylactic Acid (Pla)/nano-Hydroxyapatite (N-Ha) Composite Fluid 3D Printed by Fused Deposition Modeling

Thermal decomposition features of micro-nano rice husk/polylactic acid blends for 3D printing

Correlating thermodynamics, morphology, mechanics and thermal transport in PMMA-PLA blends

A Mechanical Model for Stress Relaxation of Polylactic Acid/Thermoplastic Polyurethane Blends

Machine Learning Analysis of Enhanced Biodegradable Phoenix dactylifera L./HDPE Composite Thermograms

Experimental and multiscale analysis of volume fraction effects in tensile properties of recycled PLA-PDA/kenaf fiber 3D printing filament composites

Study of the Chemical and Physical Properties of the Fiber-Matrix Interface of Biocomposite Material Based on a Copolymer Matrix Polylactic Acid (PLA)

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

A theoretical approach based on machine learning for estimation of physical properties of LLDPE in moulding process

Morphologies, Compatibilization and Properties of Immiscible PLA-Based Blends with Engineering Polymers: An Overview of Recent Works

Machine Learning Study of the Effect of Process Parameters on Tensile Strength of FFF PLA and PLA-CF

In-line NIR coupled with machine learning to predict mechanical properties and dissolution profile of PLA-Aspirin

Manipulation of crystallization nucleation and thermal degradation of PLA films by multi-morphologies CNC-ZnO nanoparticles