Abstract:The nonlinear coefficient of chalcogenide glass is 200-1000 times larger than that of silica glass, and it is transparent in the 1-15 μm wavelength windows, which makes the nonlinear effects happen at much low power with a short length in near- and mid-infrared wavelength window. With tapered chalcogenide fibers, the power density in the core and the waveguide nonlinearity can be enhanced to make nonlinear signal processing unit at a compact size. The threshold of Raman scattering and supercontinuum generation is reduced due to the enhanced Kerr effect and enhanced optical power intensity. Phase-matching condition required in four-wave mixing (FWM) can be realized by tailoring fiber structures to engineer the chromatic dispersion, which enables new wavelengths creation over a large range at mW power and sub-meter length. The guided acoustic waves and longitudinal acoustic waves can be generated and detected in mW power with chalcogenide tapers. The high power density in the microwires and the high photosensitivity of chalcogenide glass in the 1550 nm band enable the inscription of FBGs in the fiber directly. The chalcogenide microwires are fragile and the core diameter cannot be tapered down to sub-microns, which can be mitigated by polymer coating that can provide mechanical strength. Polymers not only provide high mechanical strength as the coating and cladding materials but also bring over 10 times larger thermal expansion than chalcogenide cores, which enhances the sensor prospect of the chalcogenide fibers for temperature, strain, and acoustic sensing. This work reviews the present and emerging trends in investigation of chalcogenide tapers, mainly focusing on the fabrication procedure of chalcogenide microwires, the nonlinear effects, and sensing applications.

Multimaterial preform coextrusion for robust chalcogenide optical fibers and tapers

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Manufacturing of GLS-Se glass rods and structured preforms by extrusion for optical fiber drawing for the IR region

Amorphous thin films for mechanically flexible, multimaterial integrated photonics

Mid-infrared hollow core fiber drawn from a 3D printed chalcogenide glass preform

Low-loss, robust fusion splicing of silica to chalcogenide fiber for integrated mid-infrared laser technology development

Integrated Flexible Chalcogenide Glass Photonic Devices

Solution Processing and Resist‐Free Nanoimprint Fabrication of Thin Film Chalcogenide Glass Devices: Inorganic–Organic Hybrid Photonic Integration

Chalcogenide glass based integrated photonics

Tapered Chalcogenide-Glass Rods for Multi-Octave Mid-Infrared Supercontinuum Generation

Engineering Materials for Mid-Infrared Optical Sensor Applications

Chalcogenide Glass Planar Photonics: from Mid-Ir Sensing to 3-D Flexible Substrate Integration

Demonstration of High-Performance, Sub-Micron Chalcogenide Glass Photonic Devices by Thermal Nanoimprint

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

Chalcogenide Taper and Its Nonlinear Effects and Sensing Applications

Large mode-area all-solid anti-resonant fiber based on chalcogenide glass for mid-infrared transmission.

Solution-processed chalcogenide glass for integrated single-mode mid-infrared waveguides

3D Laser Engineering of Molten Core Optical Fibers: Toward a New Generation of Harsh Environment Sensing Devices

Silica Multicore Microstructured Optical Fibers with Induced Twisting

Design and fabrication of a chalcogenide hollow-core anti-resonant fiber for mid-infrared applications.

Design And Fabrication Of Scpof Preform Doped With Rare Earth Complexes