Abstract:Intergranular fatigue crack nucleation has been reported to occur commonly at high angle grain boundaries (HAGBs) but seldom at low angle GBs (LAGBs) during persistent slip band (PSB)-GB interactions. However, the mechanistic understanding of the role of GB misorientation angles in affecting the GB fatigue cracking remains limited due to the lack of quantitative descriptions. Here a theoretical framework based on the competition between dislocation transmission across GB and GB cracking is established for investigating the GB fatigue crack nucleation. We show that, HAGBs usually provide higher resistances to dislocation transmissions compared with LAGBs, causing a more significant dislocation pile-up and stress concentration, which facilitates the GB crack nucleation. But the quantitative analysis indicates that even at HAGBs with poor plastic compatibility, the critical stress of GB cracking is much larger than the critical transmission stress. This demonstrates the crucial role of GB fatigue damage accumulation, which is associated with PSB extrusion growth, in promoting GB crack nucleation. In this study, the critical stress of dislocation transmission is derived in terms of the energy balance, and the nucleation criterion of GB crack is formulated using the fracture theory, both of which display the dependence on GB misorientation angles and grain sizes. It is found that the GB fatigue cracks preferentially nucleate at HAGBs with poor plastic compatibility and large grain sizes. The competition between dislocation transmission and GB cracking at varying fatigue cycles are also discussed. This theoretical framework offers quantitative analyses for the GB crack nucleation during PSB–GB interactions, clarifies the role of microstructures in affecting the critical cycles of GB cracking, and might offer important guidelines for designing fatigue-resistant metallic materials.

Fine granular area formation by damage‐induced shear strain localization in very‐high‐cycle fatigue

Formation of fine granular area in a non‐defect matrix of austenitic stainless steel during very high cycle fatigue

Residual stress induced granular bright facets around inclusions in high-strength steels under high-cycle fatigue

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Mechanism of fine granular area and white etching crack formation in AISI 52100 bearing steel

On the Formation of GBF of High-Strength Steels in the Very High Cycle Fatigue Regime

Non-inclusion induced crack initiation in multiphase high-strength steel during very high cycle fatigue

Influence of Non-Metallic Inclusions on Very High-Cycle Fatigue Performance of High-Strength Steels and Interpretation via Crystal Plasticity Finite Element Method

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Cross-scale early damage mechanism of VHCF based on the initiation and evolution of fine granular area in selective laser melting Ti-6Al-4 V alloy

Microstructure evolution and crack initiation behavior of Q450NQR1 high-strength weathering steel in very high cycle fatigue regime

Crystal plasticity modeling of grain boundary softening and fatigue in U75V pearlite steel under low strain conditions: A study of cyclic rolling contact fatigue

Dependence of Fatigue Strength on Inclusion Size for High-Strength Steels in Very High Cycle Fatigue Regime

Effects of local microstructure on crack initiation in super martensitic stainless steel under very-high-cycle fatigue

Microstructural Evolution and Formation of Fine Grains During Fatigue Crack Initiation Process of Laser Powder Bed Fusion Ni-based Superalloy

Nanoprecipitates assisting subsurface cracking in high-strength steel under very high cycle fatigue

High-Cycle Fatigue Fracture Behavior of Ultrahigh Strength Steels

White etching area damage induced by shear localization in rolling contact fatigue of bearing steel

Fatigue damage behaviors of pre-flawed granite containing hole and fissures exposed to variable-frequency multi-level constant amplitude (VFMLCA) cyclic loads

Microstructure-based Intergranular Fatigue Crack Nucleation Model: Dislocation Transmission Versus Grain Boundary Cracking

A Grain Level Model for Deformation and Failure of Ultrafine-Grained Tungsten