Abstract:Managed aquifer recharge is used to augment groundwater resources and provide resiliency to water supplies threatened by prolonged droughts. It is important that recharge facilities operate at their maximum efficiency to increase the volume of water stored for future use. In this study, we evaluate the use of distributed temperature sensing (DTS) technology as a tool to measure high-resolution infiltration rates at a large-scale recharge facility. Fiber optic cable was laid out inside a spreading basin in a spiral pattern, at two different depths. The cables measured the propagation of diurnal surface water temperature oscillations into the basin depth. The rate of heat propagation is proportional to the velocity of the water, making it possible to estimate the infiltration rate from the temperature measurements. Our results showed that the infiltration rate calculated from DTS, averaged over the entire basin, was within 5% of the infiltration rate calculated using a conventional metering method. The high-resolution data obtained from DTS, both spatially and temporally, revealed heterogeneous infiltration rates throughout the basin; furthermore, tracking the evolution of infiltration rates over time revealed regions with consistently high infiltration rates, regions with consistently low infiltration rates, and regions that evolved from high to low rates, which suggested clogging within that region. Water utilities can take advantage of the high-resolution information obtained from DTS to better manage recharge basins and make decisions about cleaning schedule, frequency, and extent, leading to improved basin management strategies, reduced O&M costs, and increased groundwater recharge.

Monitoring the performance of a storm water separating manifold with distributed temperature sensing

Monitoring water seepage velocity in dikes using distributed optical fiber temperature sensors

Distributed Temperature Sensing to Measure Infiltration Rates Across a Groundwater Recharge Basin

Real-time seepage health monitoring using spatial autocorrelation of distributed temperature data from fiber optic sensor

Method For Tunnel Life-Cycle Heath Monitoring Based On Distributed Optical Fiber Sensor

Combining a daily temperature pattern analysis and a heat-pulse system to estimate sediment depths in sewer systems

Experiment Study of Seepage Field Monitoring in Sandy Soil Using Carbon Coated Heating Optical Fiber-Based C-DTS

Designing a Distributed Sensing Network for Structural Health Monitoring of Concrete Tunnels: A Case Study

Distributed Optical Fibre Sensors and their Applications in Pipeline Monitoring

Towards Improved Field Application of Using Distributed Temperature Sensing for Soil Moisture Estimation: A Laboratory Experiment

A Review of Measurement Calibration and Interpretation for Seepage Monitoring by Optical Fiber Distributed Temperature Sensors

Fiber optic distributed temperature sensing for the determination of air temperature

An Improved Distributed Sensing Method for Monitoring Soil Moisture Profile Using Heated Carbon Fibers

A quantitative monitoring technology for seepage in slopes using DTS

Distributed Optical Fiber Sensors for Monitoring of Civil Engineering Structures

High-Resolution Monitoring of Scour Using a Novel Fiber-Optic Distributed Temperature Sensing Device: A Proof-of-Concept Laboratory Study

Design of System for Monitoring Seepage of Levee Engineering Based on Distributed Optical Fiber Sensing Technology

Distributed Temperature Sensing: Review of Technology and Applications

Monitoring of Tidal Variation and Temperature Change-Induced Movements of an Immersed Tunnel Using Distributed Optical Fiber Sensors (DOFSs)

Experimental Investigations of Distributed Fiber Optic Sensors for Water Pipeline Monitoring

Improvement and Performance Evaluation of a Dual-Probe Heat Pulse Distributed Temperature Sensing Method Used for Soil Moisture Estimation